The review provides an overview of research findings on microencapsulation for functional textile coatings. Methods for the preparation of microcapsules in textiles include in situ and interfacial polymerization, simple and complex coacervation, molecular inclusion and solvent evaporation from emulsions. Binders play a crucial role in coating formulations. Acrylic and polyurethane binders are commonly used in textile finishing, while organic acids and catalysts can be used for chemical grafting as crosslinkers between microcapsules and cotton fibres. Most of the conventional coating processes can be used for microcapsule-containing coatings, provided that the properties of the microcapsules are appropriate. There are standardised test methods available to evaluate the characteristics and washfastness of coated textiles. Among the functional textiles, the field of environmentally friendly biodegradable textiles with microcapsules is still at an early stage of development. So far, some physicochemical and physical microencapsulation methods using natural polymers or biodegradable synthetic polymers have been applied to produce environmentally friendly antimicrobial, anti-inflammatory or fragranced textiles. Standardised test methods for evaluating the biodegradability of textile materials are available. The stability of biodegradable microcapsules and the durability of coatings during the use and care of textiles still present several challenges that offer many opportunities for further research.

According to ISO/TR 23383, smart textiles reversibly interact with their environment and respond or adapt to changes in the environment. The present review and bibliometric analysis was performed on 5810 documents (1989–2022) from the Scopus database, using VOSviewer and Bibliometrix/Biblioshiny for science mapping. The results show that the field of smart textiles is highly interdisciplinary and dynamic, with an average growth rate of 22% and exponential growth in the last 10 years. Beeby, S.P., and Torah, R.N. have published the highest number of papers, while Wang, Z.L. has the highest number of citations. The leading journals are Sensors, ACS Applied Materials and Interfaces, and Textile Research Journal, while Advanced Materials has the highest number of citations. China is the country with the most publications and the most extensive cooperative relationships with other countries. Research on smart textiles is largely concerned with new materials and technologies, particularly in relation to electronic textiles. Recent research focuses on energy generation (triboelectric nanogenerators, thermoelectrics, Joule heating), conductive materials (MXenes, liquid metal, silver nanoparticles), sensors (strain sensors, self-powered sensors, gait analysis), speciality products (artificial muscles, soft robotics, EMI shielding), and advanced properties of smart textiles (self-powered, self-cleaning, washable, sustainable smart textiles).

The chemical composition of rainwater can serve as an indicator of the excess of acidifying air pollutants. The pH value of rainwater in the presence of sulphur dioxide and nitrogen oxides, the precursors of acid rain, falls below pH 5.6, which is the limit value for acid rain. In this research, the tailoring of halochromic textile was examined for the design of a functional textile that can serve as a sensor and inform the wearer about the presence of pollutants in the air by means of an immediate colour change. For this purpose, a polyamide 6 fabric was dyed with the pH-sensitive Bromocresol green dye, which causes a colour change below pH 3.6 (yellow) and above pH 5.4 (blue). In addition, the dyed polyamide 6 fabric was treated with a water and oil repellent finish. Colour and colour change before and after immersion of unfinished and finished dyed samples in buffer solutions with different pH values were evaluated spectrophotometrically using the CIELAB colour space. The colour fastness to rubbing, washing, and light, and the water and oil repellency of the dyed fabrics were determined according to valid SIST EN ISO standards. The results showed that the unfinished dyed polyamide 6 fabric undergoes a reversible colour change faster and more clearly than the finished dyed polyamide 6 fabric. The dyed polyamide 6 fabric had good colour fastness to rubbing and domestic and commercial laundering, while the colour fastness to light was poor. In addition, the dyed polyamide 6 fabric was pH-sensitive, despite dye degradation under xenon light, regardless of whether it was finished.

The interest in pH-sensitive textile sensors is growing in the global market. Due to their low-cost production, mechanical stability, flexibility, air-permeability, washability, and reusability, they are more suitable than electronic sensor systems. The research tailored the pH-sensitive textile by applying the pH indicator methyl orange to the cotton fabric during conventional dyeing. Adsorption of methyl orange dye to cotton fabric is hindered due to electrostatic repulsive forces between dye anions and negatively charged cotton fibre. To overcome this problem, chemical modification of cotton fabric using a commercial product was performed. The pH sensitivity of the dyed fabric was spectrophotometrically evaluated. In addition, the colour fastness of dyed cotton fabric to washing, light, hot pressing and rubbing was investigated according to valid SIST EN ISO standards. The research results show that the pH-responsive cotton fabric was successfully developed. The chemical modification of cotton fabric is crucial for the increased adsorption of methyl orange dye. The halochromic effect was not only perceived spectrophotometrically but also with the naked eye. The developed halochromic cotton fabric showed poor colour fastness to light and good colour fastness to hot pressing and rubbing, while no significant improvement in colour fastness to washing was observed, even though the fabric was after-treated with a cationic fixing agent. Higher adsorption of the methyl orange dye to the cotton fabric during the dyeing process leads to less wastewater pollution after dyeing with unfixed dye and, thus, a reduction in wastewater treatment costs.