In this paper, a cascade acceleration feedback control (AFC) enhanced by a disturbance observation and compensation (DOC) method is proposed to improve the tracking precision of telescope systems. Telescope systems usually suffer some uncertain disturbances, such as wind load, nonlinear friction and other unknown disturbances. To ensure tracking precision, an acceleration feedback loop which can increase the stiffness of such a system is introduced. Moreover, to further improve the tracking precision, we introduce the DOC method which can accurately estimate the disturbance and compensate it. Furthermore, the analysis of tracking accuracy used by this method is proposed. Finally, a few comparative experimental results show that the proposed control method has excellent performance for reducing the tracking error of a telescope system.
1 January 2015 in Mathematical Problems in Engineering
As the position sensor, photoelectric angle encoder affects the accuracy and stability of telescope control system (TCS). A TCS-based subdivision error compensation method for encoder is proposed. Six types of subdivision error sources are extracted through mathematical expressions of subdivision signals first. Then the period length relationships between subdivision signals and subdivision errors are deduced. And the error compensation algorithm only utilizing the shaft position of TCS is put forward, along with two control models; Model I is that the algorithm applies only to the speed loop of TCS and Model II is applied to both speed loop and position loop. Combined with actual project, elevation jittering phenomenon of the telescope is discussed to decide the necessity of DC-type subdivision error compensation. Low-speed elevation performance before and after error compensation is compared to help decide that Model II is preferred. In contrast to original performance, the maximum position error of the elevation with DC subdivision error compensation is reduced by approximately 47.9% from 1.42″to 0.74″. The elevation gets a huge decrease in jitters. This method can compensate the encoder subdivision errors effectively and improve the stability of TCS.
1 March 2024 in IEEE Transactions on Instrumentation and Measurement
The sensitivity and spectral performance of radio telescopes are increasingly affected by deteriorating electromagnetic environments. Therefore, developing a real-time interference elimination algorithm is urgent for future radio observations. In this paper, we developed an improved interference suppression filter algorithm named the improved least mean square (IMLMS). Unlike traditional algorithms, the IMLMS algorithm uses an exponential function varying with error to adjust the step size. The input signal is normalized according to its own average energy so that it can not only satisfy the slow change in the step size at an error near zero but also reduce the influence of the input signal size on the algorithm. The improvement degree of the target interference ratio and interference suppression degree are used to evaluate the performance of the IMLMS filter. Compared with traditional algorithms, the IMLMS algorithm has a better target interference ratio and interference suppression. The IMLMS filter is implemented in a Xilinx UltraScale KU115 FPGA, and the design of the IMLMS filter is optimized to meet the real-time observation requirements of a radio telescope with a 6 m aperture antenna at the Chashan observatory. The timing performance reaches 187.5 MHz. Compared to existing design and implementation methods, that of the IMLMS adaptive filter has high timing performance and solves the problem of interference suppression that requires high timing performance in fields such as radar and solar radio. The IMLMS filter is applied to the Chashan radio telescope for real-time observation, which further verifies the practicability of the IMLMS algorithm.
14 May 2019 in International Journal of Distributed Sensor Networks
To solve the problem that high-redshift and broad emission lines weaken the quasar discovery and observation severely, a new redshift calculation method based on piecewise Gaussian fitting is proposed. The denoised and normalized spectrum is divided into two regions, peak and non-peak, by mean square error threshold segmentation first. Then, the non-peak region spectrum is applied to fit the continuous spectrum, removal of which gains access to the residual spectrum. And, the peak of each segment in the residual spectrum is precisely fitted by single-peak Gaussian fitting to replace the original multi-peak Gaussian fitting. Finally, through matching the accurate peak value with the stationary template, the redshift value is acquired. Compared with traditional methods, the method proposed improves the precision of continuous spectrum fitting and redshift calculation. The effectiveness and accuracy of this method have been verified by experiments based on the Sloan Digital Sky Survey data.
Solar radio spectrograms contain essential information, such as the duration type; therefore, recognizing and detecting solar radio spectrograms are significant for the further study of solar radio. With the upgrading of solar radio observation, considering the equipment that has already generated amounts of data, researchers have begun to use machine learning methods to recognize and detect solar radio spectrograms to resolve the weaknesses of manual identification, such as time consumption. However, the spectrograms are characterized by noise or insignificant outburst features, which affect the recognition and detection of solar radio spectrograms. In contrast, extracting the burst region separately and the more distinctive spectrogram features will help identify and detect it. Therefore, to remove the burst domain of the radio spectrogram better, this paper combines the idea of image segmentation and proposes a solar radio spectrogram segmentation algorithm based on improved fuzzy C-means (FCM) clustering and adaptive cross filtering for the extraction of the burst domain of solar radio spectrograms. This algorithm has multiple processing steps. The first step is solar radio spectrogram segmentation with the improved FCM based on the kernel-induced distance by incorporating spatial constraints combined with random walk and adaptive affiliation linking (RWAKFCM_S). The second step is adaptive cross filtering, eliminating the noise clustered in bursts. The results show the following. (1) The RWAKFCM_S proposed in this paper has better anti-noise and segmentation performance than other methods in the synthetic, natural, and solar radio spectrogram segmentation experiments; it can also overcome the problems of noise sensitivity when segmenting spectrograms by traditional FCM. (2) The RWAKFCM_S can satisfy the high accuracy and rate of solar radio spectrogram segmentation demands. (3) The adaptive cross filtering proposed in this paper can eliminate noise clustered in the eruption domain. (4) The proposed method enables burst region extraction.
8 August 2024 in IEEE Transactions on Industrial Informatics
In the digital receiver of passive receiving radar system for radio astronomy, radar, and other fields, it is very important to improve the frequency resolution and time resolution of the observation system to obtain more precise and abundant data. This article proposes two solutions for two application scenarios. For the scene of the digital receiver in single-channel acquisition and serial transmission, this article proposes the zoom and sliding fast Fourier transform (FFT) algorithm, which is a new algorithm combining zoom FFT and sliding FFT. For the scene of the digital receiver with multichannel data transmission mode, this article proposes the zoom and sliding FFT with multiple data algorithm, which is a new algorithm combining polyphase filtering and sliding FFT. The simulation results of the related software and hardware simulations show that the two algorithms proposed in this article are practical and effective for improving the time and frequency resolution.