Serkan Ergun

Mr. Serkan Ergun

Institute for Smart Systems Technologies, University of Klagenfurt, Klagenfurt, Kärnten, Austria
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2021
Verified
Conference Paper
Closed access
SESerkan Ergun
Serkan Ergun
YDYitao Ding
Yitao Ding
HAHosam Alagi
Hosam Alagi
CSChristian Schoffmann
Christian Schoffmann
BUBarnaba Ubezio
Barnaba Ubezio
HZHubert Zangl
Hubert Zangl
During the co-presence of human workers and robots, measures are required to avoid injuries from undesired contacts. Capacitive Proximity Sensors (CPSs) offer a cost-effective solution to cover the entire robot manipulator with fast close-range perception for HRC tasks, closing the perception gap between tactile detection and mid-range perception. CPSs do not suffer from occlusion and compared to pure tactile or force sensing, they react earlier and allow increasing the operating speed of Collaborative Robots (Cobots) while still maintaining safety. However, since capacitive coupling to obstacles varies with their distance, shape and material properties, the projection from capacitance to actual distances is a general problem. In this work, we propose an universal benchmark test procedure for fellow researchers to evaluate their CPSs. Considering ISO/TS 15066 for Power and Force Limiting (PFL) as a reference, we derive the requirements for the specified body regions and propose a method for determining the operation speed to comply with PFL based on a pre-defined detection threshold. Finally, the benchmark test procedure is evaluated on three different concepts of CPSs from the contributed researchers, demonstrating the general applicability.

25 September 2023 in e+i Elektrotechnik und Informationstechnik
Verified
Journal Article
Open access
PDF file
BUBarnaba Ubezio
Barnaba Ubezio
SESerkan Ergun
Serkan Ergun
HZHubert Zangl
Hubert Zangl
Digital twins use actual sensor data to replicate the current state of a plant in a virtual model. They can be used to evaluate the current state, predict future behavior, and thus allow to refine control or optimize operation, enable predictive maintenance as well as detection of anomalies and failures.The model of a digital twin includes models of the components, behaviors and dynamics of a system. With the ability to simulate real scenarios, such models can therefore also be used before a plant is actually implemented, e.g., to predict the actual performance, identify potential issues for the implementation and to develop optimal operation strategy and algorithms. Furthermore, interfaces may be defined, implemented, and tested with such models allowing fast and easy commissioning of the physical implementation.Accurate digital twins therefore also need to include realistic sensor models, considering adverse effects that impact their output signals. The proposed work presents approaches for accurate sensor simulations allowing researchers and industries to assess sensor performance, optimize algorithms, and evaluate system-level integration. We address Frequency Modulated Continuous Wave (FMCW) radar sensors and time-of-flight cameras as examples for far-field sensors and capacitive sensors as an example for near-field sensors. The approaches can be transferred to other sensors, e.g., ultrasound sensors, LiDAR sensors and inductive or magnetic sensors so that a wide range of industrial sensors can be covered.The proposed simulations are benchmarked with different tests, including real-world experiments and compared with the corresponding real sensors.

1 October 2025 in e+i Elektrotechnik und Informationstechnik
Verified
Journal Article
Open access
PDF file
SESerkan Ergun
Serkan Ergun
TMTobias Mitterer
Tobias Mitterer
HZHubert Zangl
Hubert Zangl
Each citizen of the European Union discards approximately 12 kg of garments annually. This prompted the European Commission to start an initiative on how to handle and recycle old clothing. To this purpose, machine handling of the sorting and processing of such textiles is preferred due to the high amount of garments. As these clothing articles are soft, of different sizes, shapes, colors and articles like socks preferably need to be paired, a major challenge in the field of robotics and artificial intelligence arises. Current approaches specialize in one part of this challenging task. State of the art for the sorting of textiles part is to use cameras and pre-trained networks. This paper presents a hybrid approach on using Convolutional Neural Networks in conjunction with Visual Language Models to find and pick single pieces of garments from a convoluted pile, inspect the individual clothing article and sort them into dedicated containers. The selection is done based on type and color of garment as well as including a pairing algorithm for socks. Successful grasping and dropping as well as potential rapid object loss detection during manipulation is achieved by incorporating Wireless Capacitive Tactile Sensor Arrays to the robots’ end-effector. The approach is demonstrated in a robotic gripper use-case, showcasing grasping and sorting of garments with accuracies of 96.72% and 93.44% for type and color respectively, and pairing of textiles on the example of socks with an accuracy better than 81.90%.

9 February 2026 in IEEE Robotics and Automation Letters
Verified
Journal Article
Open access
SESerkan Ergun
Serkan Ergun
RMRishabh B. Mishra
Rishabh B. Mishra
NANarendiran Anandan
Narendiran Anandan
TMTobias Mitterer
Tobias Mitterer
Virgilio MattoliVirgilio Mattoli
Virgilio Mattoli
HZHubert Zangl
Hubert Zangl
For reliably grasping sensitive and delicate objects, measuring the distribution of normal and shear forces across contact areas is crucial – particularly for slip detection and preventing damage of delicate objects. This necessitates sensors that are easily integrated into robotic fingers (small form factor), durable and/or easily replaceable, adaptable to various gripper designs, and suitable for low-cost, high-volume production. We propose addressing these challenges with interchangeable, wireless capacitive tactile sensor arrays capable of measuring both normal and shear force distribution within a robotic finger. These sensors utilize an affordable manufacturing process based on conductive textile electrodes. We analyze a triangular electrode pattern design and compare the impact of three different types of electromagnetic shielding, which is essential for minimizing the influence of external disturbances. Experimental evaluation, including bench testing and robotic grasping experiments alongside using commercially available reference sensors, demonstrates that these sensors – despite their simplicity – achieve good correlation between applied forces and sensor response, exhibiting low hysteresis and minimal degradation over repeated use. Consequently, we anticipate these sensors will enable adaptive grasp control for improved stability.

14 October 2019 in Mathematics
Verified
Journal Article
Open access
PDF file
SESerkan Ergun
Serkan Ergun
UAUdo Ausserlechner
Udo Ausserlechner
MHMichael Holliber
Michael Holliber
WGWolfgang Granig
Wolfgang Granig
HZHubert Zangl
Hubert Zangl
Magnetic field-based sensors are used for reliable applications in automotive and aerospace industry because of their robustness. The electrification of powertrains and propulsion requires gradiometric sensing principles, because they suppress ubiquitous electromagnetic disturbances very efficiently. A prominent solution for the mass market uses a small permanent magnet attached to the end of a rotatable shaft and a small sensor chip with four Hall plates placed on the rotation axis and ahead of the magnet. Small misplacements of chip and magnet lead to errors in the detected angle of the shaft. The lateral position errors and tilts of the magnet and the chip give eight degrees of freedom (DoF). This large number of DoF and the nonlinearity of the system obscure the view on how to optimize such angle sensor systems. Therefore, this work presents a statistical description of angle errors caused by assembly tolerances. Probability distributions of angle errors are given and marked differences to Gaussian distributions are shown. The influence of spacing between sensor and magnet and the dominant influence of the shape of the magnet are clarified. The results obtained by numerical computations are in excellent agreement to recently published analytical theories. This work gives evident conclusions for statistical optimizations of such angle sensor systems.

6 October 2026 in e+i Elektrotechnik und Informationstechnik
Verified
Journal Article
Open access
PDF file
TMTobias Mitterer
Tobias Mitterer
SESerkan Ergun
Serkan Ergun
NDNarcis Dumea
Narcis Dumea
THThomas Haspl
Thomas Haspl
MRMichael Rathmair
Michael Rathmair
HZHubert Zangl
Hubert Zangl
Robotic manipulation has traditionally relied on fixed-base robotic arms with parallel grippers and external sensors for structured and repetitive tasks, which could be mounted on mobile platforms. Recent advances in limb-based locomotion and dexterous end effectors are enabling a shift toward mobile humanoid platforms. This paper examines the opportunities and challenges of that transition based on the state-of-the art in 2026 on the use case of sorting mixed textiles from an unordered heap into designated bins. We compare a conventional workcell with fixed robotic arms equipped with parallel grippers, and external vision, against a humanoid robot equipped with three-finger hands and onboard RGB‑D sensing. We assess the differences in both use cases regarding deployment flexibility, workspace reachability, safety certification, reliability and in-hand manipulation. As a preliminary step, we define a perception–manipulation pipeline for deformable objects and identify key bottlenecks that currently limit performance: category classification, grasp stability on textiles and whole-body motion planning. We conclude with an outlook on the maturity of current humanoid systems and outline the technical and regulatory steps needed for their integration into textile sorting and related industrial domains.