Concrete-filled steel tubular structural members can be recognized as an effective mean to improve the mechanical behavior in terms of strength, stiffness, ductility, and energy dissipation for the initial recycle aggregate concrete deficiencies compared with natural aggregate concrete. A small-scale model of square concrete-filled steel tubular column–reinforced concrete beam frame realized employing 100% recycled coarse aggregates was tested under combined axial loads and cyclic reversed lateral flexure. The failure modes, plastic hinges sequence, hysteresis loop, skeleton curve, stiffness degeneration, energy dissipation capacity, and ductility of the frame were presented and analyzed in detail. The structural behavior of square concrete-filled steel tubular column–reinforced concrete beam frame with 100% recycled coarse aggregates was compared with circular concrete-filled steel tubular column–reinforced concrete beam frame made with 100% recycled coarse aggregates. A fiber-based program model for the nonlinear analysis of concrete-filled steel tubular column–reinforced concrete beam frames incorporating recycled coarse aggregates was developed using SeismoStruct, to highlight the effect of recycled coarse aggregate content on mechanical behavior of recycled aggregate concrete and the confinement effect provided by outer tubes on core concrete. The analysis results show that the numerical model can well simulate and predict the seismic behavior of concrete-filled steel tubular column–reinforced concrete beam frames with 100% recycled coarse aggregate content. Both experimental and numerical results demonstrate that concrete-filled steel tubular column–reinforced concrete beam frames with large content of recycled coarse aggregates have a receivable seismic performance, and it is feasible to apply and popularize recycled aggregate concrete into concrete-filled steel tubular structures in seismic regions.

Recycled concrete aggregates (RCAs) generated from construction and demolition activities have been recognized as a feasible alternative to natural aggregates (NAs). Naturally, the columns fabricated with reinforced recycled concrete (RRC) have been proposed and investigated to promote the structural use of recycled aggregate concrete (RAC). There is still, however, very limited modeling research available to reproduce, accurately and efficiently, the seismic response of RRC columns under lateral cyclic loading; proper evaluations are also lacking on addressing the columns’ seismic behaviors. To fill some of those research gaps, a fiber-based numerical model is developed in this study and then validated with the experimental results published in the literature. Subsequently, the numerical model justified is applied to carry out a comprehensive parametric study to examine the effects of a range of variables on the hysteretic characteristics of RRC columns. Furthermore, a grey relational analysis is conducted to establish quantifiable evidence of key variable sensitivities. The evaluation results imply that the use of the additional water method (AWM) for manufacturing RAC is likely to reduce the lateral load-carrying capacity of the RRC columns (up to 10%), whereas the opposite would occur if a conventional mixing procedure is adopted. Moreover, compared with other factors such as steel area ratio, the content of RCA replacement has a less remarkable effect on the seismic performance of the RRC columns. In general, the RRC columns possess acceptable seismic-resistant properties, and they can be used in earthquake-prone regions with confidence.