In this study, quantum dot color conversion layers (QDCCLs) for full-color micro-LED display were successfully fabricated using microfluidics to conduct red and green perovskite quantum dots to the position of the pixel array. The QDCCL with full-color pixel size of 200 × 200 μm and sub-pixel size of 140 × 50 μm was achieved. Perovskite quantum dots with high quantum yield and narrow full width at half-maximum were used to achieve a wide color gamut, which was 131% of National Television Systems Committee standard. The proposed microfluidics-based QDCCL featured easy fabrication, low cost, high performance, and good integration prospects.

In this work, we report a new method to fabricate patterned perovskite quantum dots (PQDs). By this method, high resolution patterned PQDs are obtained. This method provides a reference for researchers to fabricate high-resolution patterned PQDs.

The turbine blade is a key component in an aeroengine. Currently, measuring the turbine blade radiation temperature always requires obtaining the emissivity of the target surface in advance. However, changes in the emissivity and the reflected ambient radiation cause large errors in measurement results. In this paper, a three-wavelength radiation temperature measurement method was developed, without known emissivity, for reflection correction. Firstly, a three-dimensional dynamic reflection model of the turbine blade was established to describe the ambient radiation of the target blade based on the real surface of the engine turbine blade. Secondly, based on the reflection correction model, a three-wavelength radiation temperature measurement algorithm, independent of surface emissivity, was proposed to improve the measurement accuracy of the turbine blade radiation temperature in the engine. Finally, an experimental platform was built to verify the temperature measurement method. Compared with three conventional colorimetric methods, this method achieved an improved performance on blade temperature measurement, demonstrating a decline in the maximum error from 6.09% to 2.13% and in the average error from 2.82% to 1.20%. The proposed method would benefit the accuracy in the high-temperature measurement of turbine blades.

In this article, red and green perovskite quantum dots are incorporated into the pixels of a flexible color-conversion layer assembly using microfluidics. The flexible color-conversion layer is then integrated with a blue micro-LED to realize a full-color display with a pixel pitch of 200 μm. Perovskite quantum dots feature a high quantum yield, a tunable wavelength, and high stability. The flexible color-conversion layer using perovskite quantum dots shows good luminous and display performance under different bending conditions; is easy to manufacture, economical, and applicable; and has important potential applications in the development of flexible micro-displays.

This paper presents an easy process based on microfluidics static-droplet-array (SDA) technology to fabricate quantum-dot (QD) arrays for micro-LED displays.

Parylene is used as encapsulating material for medical devices due to its excellent biocompatibility and insulativity. Its performance as the insulating polymer of implantable neural interfaces has been studied in electrolyte solutions and in vivo. Biological tissue in vitro, as a potential environment for characterization and application, is convenient to access in the fabrication lab of polymer and neural electrodes, but there has been little study investigating the behaviors of Parylene in the tissue in vitro. Here, we investigated the electrochemical impedance behaviors of Parylene C polymer coating both in normal saline and in a chilled pig brain in vitro by performing electrochemical impedance spectroscopy (EIS) measurements of platinum (Pt) wire neural electrodes. The electrochemical impedance at the representative frequencies is discussed, which helps to construct the equivalent circuit model. Statistical analysis of fitted parameters of the equivalent circuit model showed good reliability of Parylene C as an insulating polymer in both electrolyte models. The electrochemical impedance measured in pig brain in vitro shows marked differences from that of saline.