Ruben Vasquez-Medrano

Dr. Ruben Vasquez-Medrano

Universidad Iberoamericana
+1

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 May 2013 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
PEPatricio Javier Espinoza-Montero
Patricio Javier Espinoza-Montero
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano
JIJorge G. Ibanez
Jorge G. Ibanez
Bernardo A. Frontana-UribeBernardo A. Frontana-Uribe
Bernardo A. Frontana-Uribe
Electrochemical degradation of phenol (PhOH) with simultaneous reduction of O2(g) to H2O2 in acidic media was performed in an H-type divided cell (500 mL), separated with a cationic membrane (Nafion 424). Boron-doped diamond (BDD) electrodes were used as anode and cathode. The study was divided into three stages: (a) Electroanalytical study of the oxygen reduction reaction (ORR) to H2O2 by hydrodynamic linear-sweep voltammetry with a BDD-RDE in acidic and alkaline solutions; (b) galvanostatic ORR to H2O2 at BDD electrode in acidic solution (unpaired system); (c) pairing the anodic PhOH degradation with the H2O2 cathodic production at BDD electrodes. The best production of H2O2 under our conditions with the unpaired system was 250.1 mg L−1 at 1.5 mA cm−2 after 540 min of electrolysis, the highest reported to date for BDD electrode in acidic media. Total mineralization of 100 mg L−1 of PhOH in the paired system required a higher current density (i.e., 2.5 mA cm−2); in spite of this, the process is one order of magnitude faster than any electrochemical process previously reported.

19 January 2017 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
AVAlma L. Valenzuela
Alma L. Valenzuela
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano
JIJorge G. Ibanez
Jorge G. Ibanez
BFBernardo A. Frontana-Uribe
Bernardo A. Frontana-Uribe
DPDorian Prato-Garcia
Dorian Prato-Garcia

10 February 2021 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
JCJeanette Verónica Carrera-Cevallos
Jeanette Verónica Carrera-Cevallos
DPDorian Prato-Garcia
Dorian Prato-Garcia
PEPatricio Javier Espinoza-Montero
Patricio Javier Espinoza-Montero
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano

8 September 2020 in Processes
Verified
Journal Article
Open access
PDF file
ETELIA ALEJANDRA TEUTLI-SEQUEIRA
ELIA ALEJANDRA TEUTLI-SEQUEIRA
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano
DPDorian Prato-Garcia
Dorian Prato-Garcia
JIJorge Ibáñez
Jorge Ibáñez
This study investigated the degradation of the herbicides diquat (DQ) and paraquat (PQ) by a solar photo-Fenton process that is mediated by Fe(III)-oxalate complexes at circumneutral pH = 6.5 in compound parabolic collectors (CPC)-type reactors. The photo-Fenton process operates efficiently at acidic pH; however, circumneutral operation was key to overcome drawbacks, such as acidification and neutralization steps, reagent costs, and the environmental footprint of chemical auxiliaries. This work revealed a remarkable reduction of total organic carbon for PQ (87%) and DQ (80%) after 300 min (at ca. 875 kJ L−1). Phytotoxicity assays confirmed that the treatment led to a considerable increase in the germination index for DQ (i.e., from 4.7% to 55.8%) and PQ (i.e., from 16.5% to 59.7%) using Cucumis sativus seeds. Importantly, treatment costs (DQ = USD$8.05 and PQ = USD$7.72) and the carbon footprint of the process (DQ = 7.37 and PQ = 6.29 kg CO2-Eqv/m3) were within the ranges that were reported for the treatment of recalcitrant substances at acidic conditions in CPC-type reactors. Life cycle assessment (LCA) evidenced that H2O2 and electricity consumption are the variables with the highest environmental impact because they contribute with ca. 70% of the carbon footprint of the process. Under the studied conditions, a further reduction in H2O2 use is counterproductive, because it could impact process performance and effluent quality. On the other hand, the main drawback of the process (i.e., energy consumption) can be reduced by using renewable energies. The sensitivity study evidenced that carbon footprint is dependent on the energy share of the local electricity mix; therefore, the use of more renewable electrical energy sources, such as wind-power and photovoltaic, can reduce greenhouse gases emissions of the process an average of 26.4% (DQ = 5.57 and PQ = 4.51 kg CO2-Eqv/m3) and 78.4% (DQ = 3.72 and PQ = 2.65 kg CO2-Eqv/m3), respectively. Finally, from the economic and environmental points of view, the experimental results evidenced that photo-assisted treatment at circumneutral pH is an efficient alternative to deal with quaternary bipyridinium compounds.

8 November 2024 in Processes
Verified
Journal Article
Open access
PDF file
ETELIA ALEJANDRA TEUTLI-SEQUEIRA
ELIA ALEJANDRA TEUTLI-SEQUEIRA
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano
DPDorian Prato-Garcia
Dorian Prato-Garcia
JIJorge Ibáñez
Jorge Ibáñez
Boron-doped diamond electrodes (BDDEs) offer a highly efficient pathway to mineralize recalcitrant compounds due to their reduced energy requirements, fewer chemical inputs, and mechanical stability. In this work, the electrochemical degradation of paraquat (PQ) and diquat (DQ) was studied using an undivided cell (Condiacell®-type) at circumneutral pH, and under galvanostatic control. The roles of applied current density, volumetric flow rate, and herbicide concentration were systematically studied through a central composite design (CCD) using a closed-flow reaction setup. Under the best operating conditions (i.e., for PQ: 1.6 mA/cm2, 80 mL/min, and 70 mL/min, and 70 mg/L; and for DQ: 1.5 mA/cm2, 80 mL/min, and 73 mg/L), a spectrophotometric analysis evidenced that the herbicides were satisfactorily removed (ca. 100%) while mineralization degrees were above 90%. Furthermore, the produced effluents yielded significant increases in seed germination and root length, which suggest a reduction in toxicity. Energy consumptions of 0.13 and 0.18 kWh/g of TOC are reported with the electrochemical cells for the PQ and DQ treatments, respectively. The PQ and DQ treatments by electrooxidation are estimated to emit nearly 2.7 and 38.9 kg CO2/m3 of water treated, with a cost around USD 250/m3. Carbon emissions could be greatly decreased for PQ (0.28 kg CO2/m3) and DQ (0.40 kg CO2/m3) if electricity were generated from renewable resources. Although this study suggests that the use of BDDE can be considered as a green alternative for agrochemical removal due to lower carbon emissions, the environmental profile of the process is determined by the degree of renewability of the electrical grid of each country or region.

19 September 2023 in Journal of the Mexican Chemical Society
Verified
Journal Article
Open access
PDF file
NVNoe Valladares
Noe Valladares
Ruben Vasquez-MedranoRuben Vasquez-Medrano
Ruben Vasquez-Medrano
DPDorian Prato-Garcia
Dorian Prato-Garcia
JIJorge G. Ibanez
Jorge G. Ibanez
We studied the mineralization of the herbicide bentazon (Bn) through advanced electro-oxidation using a non-divided modified Diachem® cell. The treatment system consisted of an array of three boron-doped diamond (BDD) electrodes: cathode-anode-cathode. The chosen variables of interest were current density (j = 0.5, 1.0, and 1.5 mA cm-2), the initial Bn concentration (10, 50, and 100 mg L-1), and the volumetric flow (v = 280, 500, and 750 mL min-1). In all cases, a 0.04 M Na2SO4 and 0.05 M NaHSO4 (pH ~ 2) solution was used as the supporting electrolyte. Results indicate that, at low current densities, up to 86 % of the Bn present in the solution can be removed (j = 1.0 mA cm-2 and v = 500 mL min-1); however, additional increases in j (from 1.0 to 1.5 mA cm-2) slightly increase (2-3 %) the removal efficiency but increase 55 % the carbon footprint and the treatment cost. Likewise, increases in the volumetric flow from 500 to 750 mL min-1 marginally affect the elimination of Bn and the removal of total organic carbon (TOC) in 1% and 4 %, respectively. The highest efficiencies for TOC (68 %) and COD (82 %) removals were obtained with the following operational conditions: j = 1.0 mA cm-2 and v = 750 mL min-1. Values obtained for the instantaneous current efficiency (ICE) showed an exponential reduction, suggesting that mass transfer influences importantly the efficiency of the process. Resumen. En este trabajo se estudió la mineralización del herbicida bentazón (Bn) por medio de electroooxidación avanzada utilizando una celda no dividida Diachem® modificada. El sistema de tratamiento consta de un arreglo de tres electrodos de diamante dopado con boro (BDD): cátodo-ánodo-cátodo. Las variables de interés seleccionadas fueron: la densidad de corriente (j = 0.5, 1.0 y 1.5 mA cm-2), la concentración inicial de Bn (10, 50 y 100 mg L-1) y el flujo volumétrico (v = 280, 500 y 750 mL min-1). En todos los casos se usó como electrolito soporte una solución de 0.04 M Na2SO4 y 0.05 M de NaHSO4 (pH ~ 2). Los resultados obtenidos indican que, a bajas densidades de corriente, se puede remover hasta el 86 % del Bn presente en solución (j = 1.0 mA cm-2 y v = 500 mL min-1); sin embargo, aumentos adicionales en j (de 1.0 a 1.5 mA cm-2) elevan ligeramente la eficiencia de remoción (2-3 %) pero incrementan hasta en un 55% la huella de carbono y el costo de tratamiento. De igual forma, incrementos en el flujo volumétrico de 500 a 750 mL min-1 afectan de forma marginal la eliminación del Bn y la remoción del carbono orgánico total (TOC) en un 1 % y 4 %, respectivamente. Las mayores eficiencias de remoción de TOC (68 %) y COD (82 %) se obtuvieron con las siguientes condiciones operativas: j = 1.0 mA cm-2 y v = 750 mL min-1. Los valores obtenidos de la eficiencia de corriente instantánea (ICE) presentaron una reducción exponencial, lo cual sugiere que la transferencia de masa tiene una influencia importante en la eficiencia del proceso.