Diamond anvil cells may not only impose pressure upon a sample but also a compressive stress that produces elastic and plastic deformation of polycrystalline samples. The plastic deformation may result in texture development if the material deforms by slip or mechanical twinning, or if grains have a non-equiaxed shape. In radial diffraction geometry, texture is revealed by variation of intensity along Debye rings relative to the compression direction. Diffraction images (obtained by CCD or image plate) can be used to extract quantitative texture information. Currently the most elegant and powerful method is a modified Rietveld technique as implemented in the software package MAUD. From texture data one can evaluate the homogeneity of strain in a diamond anvil cell, the strain magnitude and deformation mechanisms, the latter by comparing observed texture patterns with results from polycrystal plasticity simulations. Some examples such as olivine, magnesiowuestite, MgSiO(3) perovskite and ε-iron are discussed.
21 April 2020 in Geochemistry, Geophysics, Geosystems
The exact mechanism for lowermost mantle seismic anisotropy remains unknown; however, work on the elasticity and deformation of lower mantle materials has constrained a few possible options. The most probable minerals producing anisotropy are bridgmanite, postperovskite, and ferropericlase. While there is an extensive literature on the elasticity and deformation of lower mantle minerals, we create a comprehensive uniform database of D″ anisotropy scenarios. In order to characterize a range of the possible fabrics for D″ anisotropy, we carry out VPSC (visco‐plastic self‐consistent modeling) to predict textures for each proposed mineral and dominant slip system. We numerically deform each mineral under different geometrical scenarios: simple shear, pure shear, and extension. By using published single crystal elasticity values, we produce a library of 336 candidate elastic tensors. We used the elastic tensor library to revisit previously published D″‐associated seismic anisotropy studies for crossing raypaths (Siberia, North America, the Afar region of Africa, and Australia). While we cannot identify a single, unique mechanism that explains all of these data sets, we find that postperovskite (dominant slip on [100](010) or [100](001)) and periclase (dominant slip on {100}) provide the best fit to the observations and suggest reasonable shear directions for each region of interest. Bridgmanite generally provides a poor fit to the observations; however, we cannot completely rule out any particular model. As the number of anisotropy observations for D″ increases, this elastic tensor library will be helpful for observational seismologists in identifying possible mechanisms of anisotropy and shear directions at in the lowermost mantle.
We present an improved setup for the experimental study of deformation of solids at simultaneous high pressures and temperatures by radial x-ray diffraction. This technique employs a graphite resistive heated Mao–Bell type diamond anvil cell for radial x-ray diffraction in combination with a water-cooled vacuum chamber. The new chamber has been developed by the sample environment group at PETRA III and implemented at the Extreme Conditions Beamline P02.2 at PETRA III, DESY (Hamburg, Germany). We discuss applications of the new setup to study deformation of a variety of materials, including ferropericlase, calcium perovskite, bridgmanite, and tantalum carbide, at high-pressure/temperature.
Seismic anisotropy is observed above the core-mantle boundary in regions of slab subduction and near the margins of Large Low Shear Velocity Provinces (LLSVPs). Ferropericlase is believed to be the second most abundant phase in the lower mantle. As it is rheologically weak, it may be a dominant source for anisotropy in the lowermost mantle. Understanding deformation mechanisms in ferropericlase over a range of pressure and temperature conditions is crucial to interpret seismic anisotropy. The effect of temperature on deformation mechanisms of ferropericlase has been established, but the effects of pressure are still controversial. With the aim to clarify and quantify the effect of pressure on deformation mechanisms, we perform room temperature compression experiments on polycrystalline periclase to 50 GPa. Lattice strains and texture development are modeled using the Elasto-ViscoPlastic Self Consistent method (EVPSC). Based on modeling results, we find that slip is increasingly activated with higher pressure and is fully activated at ~50 GPa. Pressure and temperature have a competing effect on activities of dominant slip systems. An increasing : ratio of slip activity is expected as material moves from cold subduction regions towards hot upwelling region adjacent to LLSVPs. This could explain observed seismic anisotropy in the circum-Pacific region that appears to weaken near margins of LLVSPs.
Multiphase materials are widely applied in engineering due to desirable mechanical properties and are of interest to geoscience as rocks are multiphase. High-pressure mechanical behavior is important for understanding the deep Earth where rocks deform at extreme pressure and temperature. In order to systematically study the underlying physics of multiphase deformation at high pressure, we perform diamond anvil cell deformation experiments on MgO + NaCl aggregates with varying phase proportions. Lattice strain and texture evolution are recorded using in-situ synchrotron x-ray diffraction and are modeled using two-phase elasto-viscoplastic self-consistent (EVPSC) simulations to deduce stress, strain, and deformation mechanisms in individual phases and the aggregate. Texture development of MgO and NaCl are affected by phase proportions. In NaCl, a (100) compression texture is observed when small amounts of MgO are present. In contrast, when deformed as a single phase or when large amounts of MgO are present, NaCl develops a (110) texture. Stress and strain evolution in MgO and NaCl also show different trends with varying phase proportions. Based on the results from this study, we construct a general scheme of stress evolution as a function of phase proportion for individual phases and the aggregate.