Chitin nanofibrils (NCh, ~10 nm lateral size) are produced under conditions that are less severe compared to those for other biomass-derived nanomaterials and used to formulate high internal phase Pickering emulsions (HIPPEs). Pre-emulsification followed by continuous oil feeding facilitates a “scaffold” with high elasticity, which arrests droplet mobility and coarsening, achieving edible oil-in-water emulsions with internal phase volume fraction as high as 88%. The high stabilization ability of the rod-like NCh originates from the restricted coarsening, droplet breakage and coalescence upon emulsion formation. This is the result from (a) irreversible adsorption at the interface (wettability measurements by the captive bubble method) and (b) structuring in highly interconnected fibrillar networks in continuous phase (rheology, cryo-SEM, and fluorescent microscopies). Owing to the fact that the surface energy of NCh can be tailored by pH (protonation of surface amino groups), emulsion formation is found to be pH-dependent. Emulsions produced at pH from 3 to 5 are most stable (at least for two weeks). Although at a higher pH NCh is dispersible and the three-phase contact angle indicates better interfacial wettability to the oil phase, the lower inter-droplet repulsion causes coarsening at high oil loading. We further show the existence of a tradeoff between NCh axial aspect and minimum NCh concentration to stabilize 88% oil-in-water HIPPEs: only 0.038 wt% (based on emulsion mass) NCh of high axial aspect is required compared to 0.064 wt% for shorter one. The as-produced HIPPEs are easily textured by taking advantage of their elastic behavior and resilience to compositional changes. Hence, chitin-based HIPPEs are demonstrated as emulgel inks suitable for 3D printing (millimeter definition) via direct ink writing, e.g., for edible functional foods and ultra-light solid foams displaying highly interconnected pores and for potential cell culturing applications.
Understanding nanoscale moisture interactions is fundamental to most applications of wood, including cellulosic nanomaterials with tailored properties. By combining X-ray scattering experiments with molecular simulations and taking advantage of computed scattering, we studied the moisture-induced changes in cellulose microfibril bundles of softwood secondary cell walls. Our models reproduced the most important experimentally observed changes in diffraction peak locations and widths and gave new insights into their interpretation. We found that changes in the packing of microfibrils dominate at moisture contents above 10-15%, whereas deformations in cellulose crystallites take place closer to the dry state. Fibrillar aggregation is a significant source of drying-related changes in the interior of the microfibrils. Our results corroborate the fundamental role of nanoscale phenomena in the swelling behavior and properties of wood-based materials and promote their utilization in nanomaterials development. Simulation-assisted scattering analysis proved an efficient tool for advancing the nanoscale characterization of cellulosic materials.
8 March 2021 in Journal of Dispersion Science and Technology
Aqueous foam can be used as a transfer medium to form lightweight materials from natural and man-made fibers together with other types of raw materials. This review discusses mechanisms that underlie the forming process and thus influence physical properties of formed fiber networks such as microporous structure, strength behavior, and transport properties. Homogeneous fiber materials can be formed from versatile raw materials, which makes the technology suitable for a vast range of product applications. An intriguing feature of the method is that the wet foam characteristics provide an additional tool to tailor the performance of the dried material. Understanding foam rheology and how that is affected by added fibers is important in developing the forming process. We introduce both fundamental foam properties and practical forming methods, and show how the material properties are affected by the foam–fiber interaction. The basic features of an industrial production process are also described. The potential material properties are compared against key requirements in typical product applications. Graphical Abstract
The origins of the unique properties of natural fibres have remained largely unresolved because of the complex interrelations between structural hierarchy, chirality and bound water. In this paper, analysis of the melting endotherms for bleached hardwood pulps indicates that the amount of non-freezing bound water (0.21 g/g) is roughly half of the amount of freezing bound water (0.42 g/g). We link this result to the two smallest constitutive units, microfibrils and their bundles, using molecular dynamics simulations at both hierarchical levels. The molecular water layers found in the simulations correspond quite accurately to the measured amount of non-freezing and freezing bound water. Disorder that results from the microfibril twist and amphiphilicity prevents co-crystallisation, leaving routes for water molecules to diffuse inside the microfibril bundle. Moreover, the simulations predict correctly the magnitude of the right-handed twist at different hierarchical levels. Significant changes in hydroxymethyl group conformations are seen during twisting that compare well with existing experimental data. Our findings go beyond earlier modelling studies in predicting the twist and structure of the microfibril bundle.