The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Magnetic nanoparticles (MNPs) have attracted extensive interest in recent years because of their unique magnetic, electronic, catalytical, optical, and chemical properties. Lately, research on bimetallic MNPs based on nickel and copper (NiCu MNPs) gained momentum owing to their desired properties for use in biomedicine, such as their chemical stability, biocompatibility, and highly tunable magnetic properties by means of synthesis parameter tuning. The general interest of using NiCu MNPs in biomedical applications is still low, although it is steadily increasing as can be deduced from the number of related publications in the last years. When exposed to an alternating magnetic field (AMF), superparamagnetic particles (such as NiCu MNPs) generate heat by relaxation losses. Consequently, magnetic hyperthermia in cancer treatment seems to be their most promising application in medicine, although others are emerging as well, such as their use to guide potent drugs to the targeted site or to prolong their localization at a desired site in the body. This review is the first, to the best of our knowledge, that covers the available knowledge related to the preparation of NiCu MNPs using different methods, their resulting properties, and the already developed functionalization methods and that discusses everything mentioned in relation to their possible applicability in biomedicine.

Intervertebral disc (IVD) degeneration (IDD) is associated with low back pain and significantly affects the patient’s quality of life. Degeneration of the IVD alters disk height and the mechanics of the spine, leading to chronic segmental spinal instability. The pathophysiology of IVD disease is still not well understood. Current therapies for IDD include conservative and invasive approaches, but none of those treatments are able to restore the disc structure and function. Recently, tissue engineering techniques emerged as a possible approach to treat IDD, by replacing a damaged IVD with scaffolds and appropriate cells. Advances in manufacturing techniques, material processing and development, surface functionalization, drug delivery systems and cell incorporation furthered the development of tissue engineering therapies. In this review, biomaterial scaffolds and cell-based therapies for IVD regeneration are briefly discussed.

In this study, citric acid (CA)-coated magnetite Fe₃O₄ magnetic nanoparticles (Fe₃O₄@CA MNPs) for use as draw solution (DS) agents in forward osmosis (FO) were synthesized by co-precipitation and characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM) and magnetic measurements. Prepared 3.7% w/w colloidal solutions of Fe₃O₄@CA MNPs exhibited an osmotic pressure of 18.7 bar after purification without aggregation and a sufficient magnetization of 44 emu/g to allow DS regeneration by an external magnetic field. Fe₃O₄@CA suspensions were used as DS in FO cross-flow filtration with deionized (DI) water as FS and with the active layer of the FO membrane facing the FS and NaCl as a reference DS. The same transmembrane bulk osmotic pressure resulted in different water fluxes for NaCl and MNPs, respectively. Thus the initial water flux with Fe₃O₄@CA was 9.2 LMH whereas for 0.45 M NaCl as DS it was 14.1 LMH. The reverse solute flux was 0.08 GMH for Fe₃O₄@CA and 2.5 GMH for NaCl. These differences are ascribed to a more pronounced internal dilutive concentration polarization with Fe₃O₄@CA as DS compared to NaCl as DS. This research demonstrated that the proposed Fe₃O₄@CA can be used as a potential low reverse solute flux DS for FO processes.

Magnetic nanoparticles became increasingly interesting in recent years as a result of their tailorable size-dependent properties, which enable their use in a wide range of applications. One of their emerging applications is biomedicine; in particular, bimetallic nickel/copper magnetic nanoparticles (NiCu MNPs) are gaining momentum as a consequence of their unique properties that are suitable for biomedicine. These characteristics include stability in various chemical environments, proven biocompatibility with various cell types, and tunable magnetic properties that can be adjusted by changing synthesis parameters. Despite the obvious potential of NiCu MNPs for biomedical applications, the general interest in their use for this purpose is rather low. Nevertheless, the steadily increasing annual number of related papers shows that increasingly more researchers in the biomedical field are studying this interesting formulation. As with other MNPs, NiCu-based formulations were examined for their application in magnetic hyperthermia (MH) as one of their main potential uses in clinics. MH is a treatment method in which cancer tissue is selectively heated through the localization of MNPs at the target site in an alternating magnetic field (AMF). This heating destroys cancer cells only since they are less equipped to withstand temperatures above 43 °C, whereas this temperature is not critical for healthy tissue. Superparamagnetic particles (e.g., NiCu MNPs) generate heat by relaxation losses under an AMF. In addition to MH in cancer treatment, which might be their most beneficial potential use in biomedicine, the properties of NiCu MNPs can be leveraged for several other applications, such as controlled drug delivery and prolonged localization at a desired target site in the body. After a short introduction that covers the general properties of NiCu MNPs, this review explores different synthesis methods, along with their main advantages and disadvantages, potential surface modification approaches, and their potential in biomedical applications, such as MH, multimodal cancer therapy, MH implants, antibacterial activity, and dentistry.

In this study, three locally available biomasses, namely miscanthus, hops, sewage sludge, and additionally, their mixtures, were subjected to the torrefaction process to improve their fuel properties. The torrefaction process was conducted at 250–350 °C and 10–60 min in a nitrogen (N₂) environment. The torrefaction temperature and time were studied to evaluate the selected biomass materials; furthermore, heating values, mass and energy yields, enhancement factors, torrefaction severity indexes (TSI), and energy-mass co-benefit indexes (EMCI) were calculated. In addition, thermogravimetric (TGA) and Fourier transform infrared analyses (FTIR) were performed to characterize raw and torrefied biomass under the most stringent conditions (350 °C and 60 min). The results showed that with increasing torrefaction temperature and duration, mass and energy yields decreased, and heating values (HHVs) increased for all studied biomasses. The results of the TSI and EMCI indexes showed that the optimum torrefaction conditions were as follows: 260 °C and 10 min for pure miscanthus and hops, whilst this could not be confirmed for the sewage sludge. Furthermore, the combination of sewage sludge and the above-mentioned types of lignocellulosic biomass exhibited better fuel properties than sewage sludge alone.