Katarzyna Braszczyńska-Malik

Prof. Dr. Katarzyna Braszczyńska-Malik


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
In this paper, a summary of investigations of the microstructure of cast magnesium matrix composites is presented. Analyses of the interfaces between the reinforcing particles and the magnesium alloy matrices were performed. Technically pure magnesium and four various alloys with aluminum and rare earth elements (RE) were chosen as the matrix. The composites were reinforced with SiC and Ti particles, as well as hollow aluminosilicate cenospheres. Microstructure analyses were carried out by light, scanning, and transmission electron microscopy. The composites with the matrix of magnesium and magnesium–aluminum alloys with SiC and Ti particles exhibited coherent interfaces between the components. In the composites based on ternary magnesium alloy with Al and RE with Ti particles, a high-melting Al2RE phase nucleated on the titanium. Different types of interfaces between the components were observed in the composites based on the magnesium–rare earth elements alloy with SiC particles, in which a chemical reaction between the components caused formation of the Re3Si2 phase. Intensive chemical reactions between the components were also observed in the composites with aluminosilicate cenospheres. Additionally, the influence of coatings created on the aluminosilicate cenospheres on the bond with the magnesium matrix was presented. A scheme of the types of interfaces between the components is proposed.

19 September 2017 in Metallurgical and Materials Transactions A
Verified
Journal Article
Open access
PDF file
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
JKJacek Kamieniak
Jacek Kamieniak
The role of the Ni-P coating structure on fly ash cenospheres in the fabrication of magnesium matrix composites has been investigated. Two composites based on AZ91 commercial magnesium alloys with hollow aluminosilicate cenospheres were fabricated by the negative pressure infiltration technique. Two kinds of cenospheres (i.e., as Ni-P coated and after heat treatment) were used in order to determine the influence of the Ni-P coating structure on creating interfaces between the components. Microstructure analyses were carried out by light microscopy, atomic force microscopy, XRD, scanning, and transmission electron microscopy. Al3Ni2 and Mg2Ni intermetallic phases at the component interfaces were formed in the composite with as-received Ni-P-coated cenospheres. After heat treatment of the Ni-P-coated cenospheres, NiO was created outside the external layer of the Ni-P coatings and this oxide remained stable at the component interfaces during composite fabrication. In both cases, the Ni-P coating prevented the reaction between the cenosphere walls and the magnesium matrix alloy, which contributed to obtaining intact cenospheres, unfilled by the matrix alloy.

10 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
In this paper, a new hybrid metal matrix composite, named AZ91/(SiC + Ti)p, is presented. The commercial AZ91 magnesium alloy was chosen as the matrix. The composite was reinforced with both SiC and Ti particles. The investigated material was successfully fabricated using stir casting methods. Microstructure analyses were carried out by digital and scanning electron microscopy with an energy-dispersive X-ray spectrometer (SEM + EDX). Detailed investigations disclosed the presence (besides the reinforced particles) of primary dendrites of the α phase, α + γ eutectic and some part of discontinuous precipitates of the γ phase in the composite microstructure. The composite was characterised by uniform distribution of the Ti particles, whereas the SiC particles were revealed inside the primary dendrites of the α phase, on the Ti particles and in the interdendritic regions as a mixture with the α + γ eutectic. Both the tensile and compression strength as well as the yield strength of the composite were examined in both uniaxial tensile and compression tests at room temperature. The fabricated AZ91/(SiC + Ti)p hybrid composite exhibited higher mechanical properties of all those investigated in comparison with the unreinforced AZ91 matrix alloy (cast in the same conditions). Additionally, analyses of the fracture surfaces of the AZ91/(SiC + Ti)p hybrid composite carried out using scanning electron microscopy (SEM + EDX) were presented.

1 May 2016 in Materials Characterization
Verified
Journal Article
Closed access
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
AGA. Grzybowska
A. Grzybowska

14 August 2020 in Materials
Verified
Journal Article
Open access
PDF file
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
MMMarcin A. Malik
Marcin A. Malik
In this paper, the microstructure and mechanical properties of two magnesium matrix composites—a hypoeutectic with 1.9 wt% Mg2Si phase and a hypereutectic with 19 wt% Mg2Si compound—were analyzed. The investigated materials were prepared using the gravity casting method. Microstructure analyses of the fabricated composites were carried out by XRD and light microscopy. The tensile and compression strength as well as yield strength of the composites were examined in both uniaxial tensile and compression tests. The microstructure of the hypoeutectic composite was in agreement with the phase diagram and composed of primary Mg dendrites and an Mg–Mg2Si eutectic mixture. For the hypereutectic composite, besides the primary Mg2Si phase and eutectic mixture, additional magnesium dendrites surrounding the Mg2Si compound were observed due to nonequilibrium solidification conditions. The composites exhibited a rise in the examined mechanical properties with an increase in the Mg2Si weight fraction and also a higher tensile and compression strength in comparison to the pure magnesium matrix (cast in the same conditions). Additionally, analyses of fracture surfaces of the composites carried out using scanning electron microscopy (SEM + EDX) are presented.

1 March 2014 in Archives of Foundry Engineering
Verified
Journal Article
Open access
PDF file
KBKatarzyna Braszczyńska-Malik
Katarzyna Braszczyńska-Malik
The results of some mechanical properties of four Mg-5Al-xRE-0.4Mn (x = 1 - 5) alloys are presented. The microstructure of experimental alloys consisted of an α-Mg phase and an α+γ semi-divorced eutectic, Al11RE3 phase and an Al10RE2Mn7 intermetallic compound. For gravity casting in metal mould alloys, Brinell hardness, impact strength, tensile and compression properties at ambient temperature were determined. The performed mechanical tests allowed the author to determine the proportional influence of the mass fraction of rare earth elements in the alloys on their tensile strength, yield strength, compression strength and Brinell hardness. The impact strength of the alloys slightly decreases with a rise in the rare earth elements mass fraction.