Supporting policies to achieve a green revolution and ecological transition is a global trend. Although the maritime transport of goods and people can rightly be counted among the least polluting sectors, much can be done to further reduce its environmental footprint. Moreover, to boost the ecological transition of vessels, a whole series of international regulations and national laws have been promulgated. Among these, the most impactful on both design and operational management of ships concern the containment of air-polluting emissions in terms of GHG, NOx, SOx and PM. To address this challenge, it might seem that many technologies already successfully used in other transport sectors could be applied. However, the peculiar characteristics of ships make this statement not entirely true. In fact, technological solutions recently adopted, for example, in the automotive sector must deal with the large size of vessels and the consequent large amount of energy necessary for their operation. In this paper, with reference to the case study of a medium/large-sized passenger cruise ship, the use of different fuels (LNG, ammonia, hydrogen) and technologies (internal combustion engines, fuel cells) for propulsion and energy generation on board will be compared. By imposing the design constraint of not modifying the payload and the speed of the ship, the criticalities linked to the use of one fuel rather than another will be highlighted. The current limits of application of some fuels will be made evident, with reference to the state of maturity of the relevant technologies. Furthermore, the operational consequences in terms of autonomy reduction will be presented. The obtained results underline the necessity for shipowners and shipbuilders to reflect on the compromises required by the challenges of the ecological transition, which will force them to choose between reducing payload or reducing performance.

The need for decision support after a flooding casualty requires the development of fast and accurate progressive flooding simulation procedures. Here, a new quasi-static technique is presented, proposing a differential algebraic formulation capable to consider independently the flooding process in the internal rooms. The proposed method is efficient while simulating long flooding chains along rooms connected by similar size openings, a condition that likely occurs on large passenger ships. Moreover, the computational performances of the simulation procedure have been enhanced by adapting the time step to the progressive flooding pace. The adoption of an adaptive time step algorithm reduces significantly the calculation time. The novel procedure has been tested on the recommended benchmark cases for flooding simulations, highlighting the accuracy and flexibility of the proposed method.

The continuous increasing attention to environmental sustainability and air pollution reduction for transport systems, requires not only to adopt new technologies and innovative solutions to limit vehicles emissions, but also to study their life-cycle. In case of inland navigation, the operation close to urban areas or in natural protected environments requires the adoption of a green propulsion. Moreover, especially for small crafts, the problem of ship disposal at the end of life is of high importance, even once plastic materials should be disposed, due to high costs and process complexities. For such a reason the design of a new generation green passenger craft requires the analysis and knowledge of multiple engineering fields, that could lead to a fast and successful design only by means of an integrated approach. In the present work, this approach will be applied to the design of a passenger craft, adopting an hybrid electric powering system and build with strip planking process for wooden ships. The description of the construction process will be here described together with the on-board electric power system. The integrated approach allowed also to directly evaluate the vessel operative profile and asses whether the vessel could perform a Zero Emission Mode navigation.

During a flooding emergency, the master has to take hard decisions with serious impact on passengers and crew safety. A fast and reliable time domain simulation of the progressive flooding process can significantly aid the master in choosing the right counteractions immediately after the damage occurrence. In last decades many methods to simulate progressive flooding have been developed with increasing precision, but most of them require too much computational effort being not suitable for a direct onboard application. This paper presents a novel quasi-static simulation technique capable to provide accurate results in a reasonable calculation time. The analytical solution of the linearised system of governing differential equations allows to extend the time step over the intrinsic limits of numerical integration methods without affecting accuracy. The approach has been compared with numerical integration of non-linear system of equations and a recent pressure correction technique on a box-barge test case available in the literature.