The main objective of this paper is to experimentally assess the real-life outdoor performance of a photovoltaic-thermal (PVT) module against a conventional photovoltaic (PV) system in a hot humid tropical climate in Ghana. An experimental setup comprising a water-based mono-crystalline silicon PVT and an ordinary mono-crystalline silicon PV was installed on a rooftop at the Kwame Nkrumah University of Science and Technology in Kumasi and results evaluated for the entire year of 2019. It was observed that the annual total output energy of PV module was 194.79 kWh/m2 whereas that of the PVT for electrical and thermal outputs were 149.92 kWh/m2 and 1087.79 kWh/m2, respectively. The yearly average daily electrical energy yield for the PV and PVT were 3.21 kWh/kWp/day and 2.72 kWh/kWp/day, respectively. The annual performance ratios for the PV and PVT (based on electrical energy output only) were 79.2% and 51.6%, respectively, whilst their capacity factors were, respectively, 13.4% and 11.3%. Whereas the highest monthly mean efficiency recorded for the PV was 12.7%, the highest combined measured monthly mean electrical/thermal efficiency of the PVT was 56.1%. It is also concluded that the PVT is a worthy prospective alternative energy source in off-grid situations.
1 April 2016 in Energy for Sustainable Development
Electricity is one of the most crucial resources that drives any given nation’s growth and development. The latest Sustainable Development Goals report indicates Africa still has a high deficit in electricity generation. Concentrating solar power seems to be a potential option to fill the deficit. That is because most of the components of concentrating solar power plants are readily available on the African market at affordable prices, and there are qualified local persons to build the plants. Pilot micro-concentrating solar power plants have been implemented in Sub-Saharan Africa and have shown promising results that could be expanded and leveraged for large-scale electricity generation. An assessment of a pilot concentrating solar power plant in the sub-region noticed one noteworthy obstacle that is the failure of the tracking system to reduce the operating energy cost of running the tracking control system and improve the multifaceted heliostat focusing behavior. This paper highlights the energy situation and the current development in concentrating solar power technology research in Africa. The paper also presents a comprehensive review of the state-of-the-art solar tracking systems for central receiver systems to illustrate the current direction of research regarding the design of low-cost tracking systems in terms of computational complexity, energy consumption, and heliostat alignment accuracy.
18 November 2018 in Advances in Condensed Matter Physics
Aside from the terrestrial magnetic field that is generated from the earth core, power transmission, and distribution lines, transformers and other equipment do produce a certain amount of magnetic field that could interfere with the performance of photovoltaic modules. This study conducted an experiment and investigated the performance of a silicon photovoltaic module subjected to a magnetic field. The current-voltage and power-voltage characteristics were plotted in the same axis system and allowed us to find, as a function of the magnetic field, the electrical parameters of the photovoltaic module such as maximum electric power, fill factor, conversion efficiency, and charge resistance at the maximum power point. These electrical parameters were then used to calculate the series and shunt resistances of the equivalent circuit of the photovoltaic module. The results have shown that the efficiency of a solar module is affected by the presence of magnetic fields. However, the magnitude of ambient magnetic field generated by power transmissions lines and other equipment is extremely low (in the order of 10−2 mT or less) as compared to the values of the magnetic field used in this study. That made it difficult to conclude as to the impact of such field on solar photovoltaic installations.
The advancement of digital technologies has significantly impacted plant pest and disease management, yet gaps remain, especially in developing regions. This paper introduces the TOM2024 dataset, a comprehensive collection of high-resolution images designed to enhance pest and disease identification of maize, tomato, and onion crops. The dataset encompasses 25,844 raw images and over 12,000 labeled images, categorized into 30 classes (healthy crop, infested crop, and pest) across the three cropping systems. Acquired through meticulous fieldwork in Burkina Faso using high-resolution cameras, the dataset includes diverse environmental conditions and crop stages, ensuring a robust resource for AI model training and validation. The dataset is segmented into three categories: processed images (Category A), selected images with augmentation (Category B), and an online repository with over 25,000 raw images (Category C). Category A and B features images of crops affected by 21 distinct pests and diseases. This dataset addresses critical gaps in existing collections by offering extensive coverage and high-resolution imagery that can be used to developed AI models for automatic identification and classification of pests and diseases that affects crops. TOM2024’s versatility extends to research, educational purposes, and the practical application of digital tools in agriculture thereby contributes to the advancement of precision agriculture, sustainable agricultural practices, and food security globally.