Single surface texture or coating technology is gradually unable to produce lasting lubrication of a TC4 titanium alloy in a harsh environment. In order to address this problem, a rectangular microstructure is prepared on the surface of a TC4 titanium alloy by laser processing, and then MoS2/DLC composite interlayer nanocoatings are prepared on the surface by non-equilibrium magnetron sputtering. Friction and wear tests are then carried out on single fabricated, coated and fabricated coatings. The results show that the MoS2/DLC composite interlayered nanocoating can effectively combine with the texture to achieve better friction reduction compared with the single texture and coating. The textured composite coating has the lowest friction coefficient (reduced from 0.4122 to 0.0978) and wear. Through controlled experiments, the textured coating showed good tribological properties at different temperatures and in different friction cycle tests. This study can effectively improve the tribological properties of metal materials through composite coatings, providing research ideas for enhancing the service life of alloys under long-term friction in high-temperature environments.
In this paper, a dynamic model of an offshore drilling riser is developed based on the Hamilton principle. The developed dynamic model is transformed into a finite element model by introducing an approximate solution which chooses the Hermite cubic interpolation function of bending beam element as the shape function. Thereafter, the standard Newmark integration is applied to numerically simulate the dynamic responses of offshore drilling risers with varied system parameters, including the length of riser, top tension ratio, and buoyant factor. Based on the results of numerical simulation, under the influences of sea wind, sea current, and the periodic excitation of sea wave, the offshore drilling riser experiences a fast lateral deflection phase in the beginning, a reciprocating deflection phase in the following long duration, and then, a periodic oscillation when it reaches the dynamic stable condition, respectively. The riser system working in deeper water with a higher top tension ratio and a lower buoyant factor shows more controllable vibration and less lateral deflection.
This work studies the control optimization of a self-propelled capsule moving in the small intestinal environment for endoscopic diagnosis. For this purpose, we combine an existing capsule model with the intestinal peristalsis and its internal environment in order to gain a better understanding of dynamics of the self-propelled capsule. For the optimization study, a number of different realistic targets are considered, including the capsule’s average progression speed, the impact force acting on the small intestine and the capsule’s energy consumption. In addition, the uncertainty of the small intestine environment is taking into account by varying its internal radius. In this setting, we develop a multi-objective optimization strategy based on NSGA-II, Monte Carlo, and Six-Sigma algorithms considering both the control and structural model parameters, such as excitation frequency and impact stiffness. The effectiveness of the proposed optimization strategy is demonstrated via extensive numerical simulations with the consideration of a wide range of realistic scenarios.
1 January 2020 in Journal of Mechanical Engineering