Fourier-transform infrared (FTIR) spectromicroscopy combines the spatial resolution of optical microscopy with the spectral selectivity of vibrational spectroscopy. Synchrotron sources can provide diffraction-limited beams in the infrared, and therefore synchrotron-based FTIR spectromicroscopy is nowadays an indispensable tool for biology and materials science studies where high spatial resolution is required. However, the increasing need for accurate and highly spatially resolved characterization is calling for alternative laboratory-based sources to complement synchrotron radiation. To date, the low brightness of thermal emitters or high temporal coherence and narrow bandwidth or tunability of laser sources have hindered the progress of bench-top FTIR spectromicroscopy. Here, we demonstrate that fiber-based supercontinuum sources in the mid-infrared enable fast spectral mapping of localized material properties with close to diffraction-limited resolution ($3\mathrm{\mu m}\times 3\mathrm{\mu m}$) and pave the way to table-top, on-demand, fast, and highly spatially resolved studies. We illustrate these capabilities by imaging thin sections of human liver samples and compare the results and performance with those obtained using a synchrotron source.

The spectral window lying between 1.6 and 1.7 μ m is interesting for in-depth multiphoton microscopy of intact tissues due to reduced scattering and absorption in this wavelength range. However, wide adoption of this excitation range will rely on the availability of robust and cost-effective high peak power pulsed lasers operating at these wavelengths. In this communication, we report on a monolithically integrated high repetition rate (50 MHz) all-fiber femtosecond laser based on a soliton self-frequency shift providing 9 nJ, 75 fs pulses at 1650 nm. We illustrate its potential for biological microscopy by recording three-photon-excited fluorescence and third-harmonic generation images of mouse nervous tissue and developing Drosophila embryos labeled with a red fluorescent protein.

Light beams carrying orbital angular momentum (OAM) have led to stunning applications in various fields from quantum information to microscopy. We examine OAM from the recently observed high-harmonic generation (HHG) in semiconductor crystals. HHG from solids could be a valuable approach for integrated high-flux short-wavelength coherent light sources. First, we verify the transfer and conservation of the OAM in the strong-field regime of interaction from the generation laser to the harmonics. Secondly, we create OAM beams by etching a spiral zone structure directly at the surface of a zinc oxide crystal. Such diffractive optics act on the generated harmonics and produces focused optical vortices with sub-micrometric size.

The enhancement and control of non-linear phenomena at a nanometer scale has a wide range of applications in science and in industry. Among these phenomena, high-harmonic generation in solids is a recent focus of research to realize next generation petahertz optoelectronic devices or compact all solid state EUV sources. Here, we report on the realization of the first nanoscale high harmonic source. The strong field regime is reached by confining the electric field from a few nanojoules femtosecond laser in a single 3D semiconductor waveguide. We reveal a strong competition between enhancement of coherent harmonics and incoherent fluorescence favored by excitonic processes. However, far from the band edge, clear enhancement of the harmonic emission is reported with a robust sustainability offering a compact nanosource for applications. We illustrate the potential of our harmonic nano-device by performing a coherent diffractive imaging experiment. Ultra-compact UV/X-ray nanoprobes are foreseen to have other applications such as petahertz electronics, nano-tomography or nano-medicine.

The mid-infrared spectral region opens up new possibilities for applications such as molecular spectroscopy with high spatial and frequency resolution. For example, the mid-infrared light provided by synchrotron sources has helped for early diagnosis of several pathologies. However, alternative light sources at the table-top scale would enable better access to these state-of-the-art characterizations, eventually speeding up research in biology and medicine. Mid-infrared supercontinuum generation in highly nonlinear waveguides pumped by compact fiber lasers represents an appealing alternative to synchrotrons. Here, we introduce orientation-patterned gallium arsenide waveguides as a new versatile platform for mid-infrared supercontinuum generation. Waveguides and fiber-based pump lasers are optimized in tandem to allow for the group velocities of the signal and the idler waves to match near the degeneracy point. This configuration exacerbates supercontinuum generation from 4 to 9 µm when waveguides are pumped at 2750 nm with few-nanojoule energy pulses. The brightness of the novel mid-infrared source exceeds that of the third-generation synchrotron source by a factor of 20. We also show that the nonlinear dynamics is strongly influenced by the choice of waveguide and laser parameters, thus offering an additional degree of freedom in tailoring the spectral profile of the generated light. Such an approach then opens new paths for high-brightness mid-infrared laser sources development for high-resolution spectroscopy and imaging. Furthermore, thanks to the excellent mechanical and thermal properties of the waveguide material, further power scaling seems feasible, allowing for the generation of watt-level ultra-broad frequency combs in the mid-infrared.

Prospects for average power scaling of sub-MW output peak power picosecond fiber lasers by utilization of a Yb-doped tapered fiber at the final amplification stage were studied. In this paper, it was shown experimentally that a tapered fiber allows the achievement of an average power level of 150 W (limited by the available pump power) with a peak power of 0.74 MW for 22 ps pulses with no signs of transverse mode instability. Measurements of the mode content using the S² technique showed a negligible level of high order modes (less than 0.3%) in the output radiation even for the maximum output power level. Our reliability tests predict no thermal issues during long-term operation (10⁵ hours) of the developed tapered fiber laser up to kilowatt output average power levels.