This paper investigates the transmit beamforming design for multiple-input multiple-output systems to support both multi-target localization and multi-user communications. To enhance the target localization performance, we derive the asymptotic Cramér-Rao bound (CRB) for target angle estimation by assuming that the receive array is linear and uniform. Then we formulate a beamforming design problem based on minimizing an upper bound on the asymptotic CRB (which is shown to be equivalent to maximizing the harmonic mean of the weighted beampattern responses at the target directions). Moreover, we impose a constraint on the SINR of each received communication signal to guarantee reliable communication performance. Two iterative algorithms are derived to tackle the non-convex design problem: one is based on the alternating direction method of multipliers, and the other uses the majorization-minimization technique to solve an equivalent minimax problem. Numerical results show that, through elaborate dual-function beamforming matrix design, the proposed algorithms can simultaneously achieve superior angle estimation performance as well as high-quality multi-user communications.

This paper focuses on the joint design of transmit waveforms and receive filters for airborne multiple-input-multiple-output (MIMO) radar systems in spectrally crowded environments. The purpose is to maximize the output signal-to-interference-plus-noise-ratio (SINR) in the presence of signal-dependent clutter. To improve the practicability of the radar waveforms, both a multi-spectral constraint and a peak-to-average-power ratio (PAPR) constraint are imposed. A cyclic method is derived to iteratively optimize the transmit waveforms and receive filters. In particu-lar, to tackle the encountered non-convex constrained fractional programming in designing the waveforms (for fixed filters), we resort to the Dinkelbach's transform, minorization-maximization (MM), and leverage the alternating direction method of multipliers (ADMM). We highlight that the proposed algorithm can iterate from an infeasible initial point and the waveforms at convergence not only satisfy the stringent constraints, but also attain superior performance.

This paper considers the design of constant-envelope waveforms for multiple-input-multiple-output (MIMO) dual-function radar communication (DFRC) systems. The purpose is to improve the angle estimation performance of the multiple signal classification (MUSIC) algorithm through minimizing its asymptotic estimation error bound. To guarantee the communication performance, we enforce an energy constraint as well as a cosine similarity-based constraint on the synthesized communication signals. Additionally, we constrain the energy transmitted toward each potential eavesdropper to a low level, which prevents the waveforms from being intercepted. To tackle the encountered non-convex optimization problem, we develop two iterative algorithms. The first algorithm is based on the minorization-maximization method, wherein we construct a quadratic surrogate to minorize the approximate objective function. Then we use the alternating direction method of multipliers (ADMM) to tackle the quadratic programming problem. In the second algorithm, we directly tackle the waveform design problem by the ADMM method. Numerical examples are provided to show that through elaborate waveform design, the MIMO DFRC system is capable to realize high-performance target localization and covert communications simultaneously.

Fingerprint-based positioning techniques are a hot research topic because of their satisfactory accuracy in complex environments. In this study, we adopted the deep-learning-based long-time-evolution (LTE) signal fingerprint positioning method for outdoor environment positioning. Inspired by state-of-the-art image classification methods, a novel hybrid location gray-scale image utilizing LTE signal fingerprints is proposed in this paper. In order to deal with signal fluctuations, several data enhancement methods are adopted. A hierarchical architecture is put forward during the deep neural network (DNN) training. First, the proposed positioning technique is pre-trained by a modified Deep Residual Network (Resnet) coarse localizer which is capable of learning reliable features from a set of unstable LTE signals. Then, to alleviate the tremendous collection workload, as well as further improve the positioning accuracy, by using a multilayer perceptron (MLP), a transfer learning-based fine localizer is introduced for fine-tuning the coarse localizer. The experimental data was collected from realistic scenes to meet the requirement of actual environments. The experimental results show that the proposed system leads to a considerable positioning accuracy in a variety of outdoor environments.

In this paper, we consider waveform design for dual-function radar-communication systems based on multiple-input-multiple-out arrays. To achieve better Rician target detection performance, we use the relative entropy associated with the formulated detection problem as the design metric. We also impose a multi-user interference energy constraint on the waveforms to ensure the achievable sum-rate of the communications. Two algorithms are presented to tackle the nonlinear non-convex waveform design problem. In the first algorithm, we derive a quadratic function to minorize the objective function. To tackle the quadratically constrained quadratic programming problem at each iteration, a semidefinite relaxation approach followed by a rank-one decomposition procedure and an efficient alternating direction method of multipliers (ADMM) are proposed, respectively. In the second algorithm, we present a novel ADMM algorithm to tackle the optimization problem and employ an efficient minorization-maximization approach in the inner loop of the ADMM algorithm. Numerical results demonstrate the superiority of both algorithms. Moreover, the presented algorithms can be extended to synthesize peak-to-average-power ratio constrained waveforms, which allows the radio frequency amplifier to operate at an increased efficiency.

Wi-Fi and magnetic field fingerprinting-based localization have gained increased attention owing to their satisfactory accuracy and global availability. The common signal-based fingerprint localization deteriorates due to well-known signal fluctuations. In this paper, we proposed a Wi-Fi and magnetic field-based localization system based on deep learning. Owing to the low discernibility of magnetic field strength (MFS) in large areas, the unsupervised learning density peak clustering algorithm based on the comparison distance (CDPC) algorithm is first used to pick up several center points of MFS as the geotagged features to assist localization. Considering the state-of-the-art application of deep learning in image classification, we design a location fingerprint image using Wi-Fi and magnetic field fingerprints for localization. Localization is casted in a proposed deep residual network (Resnet) that is capable of learning key features from a massive fingerprint image database. To further enhance localization accuracy, by leveraging the prior information of the pre-trained Resnet coarse localizer, an MLP-based transfer learning fine localizer is introduced to fine-tune the coarse localizer. Additionally, we dynamically adjusted the learning rate (LR) and adopted several data enhancement methods to increase the robustness of our localization system. Experimental results show that the proposed system leads to satisfactory localization performance both in indoor and outdoor environments.