Nighttime light data play an important role in the research on cities, while the urban centers over a large spatial scale are still far from clearly understood. Aiming at the current challenges in monitoring the spatial structure of cities using nighttime light data, this paper proposes a new method for identifying urban centers for massive cities at the large spatial scale based on the brightness information captured by the Suomi National Polar-Orbiting Partnership’s Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) sensor. Based on the method for extracting the peak point based on digital elevation model (DEM) data in terrain analysis, the maximum neighborhood and difference algorithms were applied to the NPP-VIIRS data to extract the pixels with the peak nighttime light intensity to identify the potential locations of urban centers. The results show 7239 urban centers in 2200 cities in China in 2017, with an average of 3.3 urban centers per city. Approximately 68% of the cities had significant polycentric structures. The developed method in this paper is useful for identifying the urban centers and can provide the reference to the city planning and construction.
9 March 2023 in IEEE Transactions on Geoscience and Remote Sensing
Land surface temperature (LST) is a crucial parameter in the study of Land Surface processes. Currently, there are great progresses in LST retrieval based on thermal infrared (TIR) remote sensing. However, TIR-based LST suffers from serious spatial discontinuities due to clouds. Although there are methods developed to address this issue, the methods show high uncertainty in days with extremely clouds. Therefore, this study proposed an integrated method to reconstruct cloudy LSTs using Terra Moderate Resolution Imaging Spectroradiometer (MODIS) and the China Land Data Assimilation System (CLDAS) LST. This method was separated into two parts according to the ratio of clear-sky pixels (RCP). On days with RCP more than 30%, a random forest reconstruction method was used to establish the complicated relationship between LST and its predicting variables, including solar radiation factor, vegetation index, water index, topographic information and latitude, and then applied to cloudy pixels to derive LSTs. For the rest days, the CLDAS LST was selected to assist the reconstruction via downscaling it to 1 km and then merged with clear-sky data to generate spatially continuous results. The proposed method was applied to the Southwest China and generate daily LST product in 2019. Validation with ground measurements demonstrated a high accuracy with the correlation coefficient changing from 0.73 to 0.88. Additionally, the reconstructed LST dataset exhibits similar temporal variability as existing all-weather satellite-based and reanalysis LST products. The findings reveal that this method shows good potential in generating gap-free LST dataset, especially for the mountain regions with heavy clouds.
5 August 2024 in IEEE Transactions on Geoscience and Remote Sensing
Cloud Mask (CM) data is indispensable for estimating Downward Surface Shortwave Radiation (DSSR). Most DSSR products are generated using CM data derived from passive satellite observations through the threshold methods. Some uncertainty exists in these CM data, yet the impact of CM quality on the DSSR estimates has received limited attention. To address this gap, this study proposed a method to quantify and mitigate errors in DSSR estimates resulting from CM data error, using the Himawari-8 (H8) products as a case study. Firstly, machine learning models were constructed for CM, DSSR, and needed atmospheric parameters for DSSR estimation. Then, high-reliability CM estimates were utilized to update the H8 CM. The missing atmospheric parameters resulting from the CM updates were filled by the constructed models. Subsequently, DSSR data were estimated based on the updated CM. Results show that the updated CM effectively corrects misclassifications in the H8 CM, and the differences are more than 600 W m -2 between DSSR estimates and H8 DSSR for some pixels. Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) CM and in-situ DSSR were used as truth references for validation. The improved accuracy of the updated CM compared to H8 CM is mainly observed for snow/ice, with clear-sky and cloudy-sky hit rates increasing by 0.1 and 0.3, respectively. Besides, when the H8 CM is consistent with the updated CM, the estimated DSSR exhibits a slightly lower Root Mean Square Error (RMSE) compared to the H8 DSSR, with a difference of no more than 3 W m -2 . However, in cases where the two CM data are inconsistent, the reduction in RMSE for the estimated DSSR compared to the H8 DSSR is more significant, exceeding 9 W m -2 .
The urban heat island effect has always been one of the hottest issues in urban development. In this study, Landsat images from the summers of 2001, 2004, 2009, 2014 and 2018 were used to identify land cover type in six districts of Chongqing’s main city. Land cover was categorized as water, vegetation or impervious surface with the object-oriented method. Land surface temperature (LST) data was calculated with the atmospheric radiation transfer equation method, and was then divided into different heat island intensity grades. Next, the spatial and temporal changes in land cover type and heat island effect were analyzed in the six districts. Center migration analysis and heat island coefficients were used to quantitatively reflect the spatiotemporal evolution relationship between land cover and heat island effect. All six districts exhibited a trend of expanding impervious surface, with a 419.38% increase from 2001 to 2018, and shrinking vegetation, with a 17.81% decrease from 2001 to 2018. Also from 2001 to 2018, Yuzhong District had the most significant heat island effect, with a heat island coefficient 0.35 higher than the mean value of the whole study area. The impervious surface center migrated in different directions in each district. Both the direction and the corresponding velocity of the impervious surface and heat island centers were tightly correlated, with a correlation coefficient of 0.53. Relative heat island coefficients (the difference from the mean) of water ranged from −2.08 to −1.17 in different districts. That of impervious surface ranged from 1.60 to 1.93, and that of vegetation ranged from −0.22 to 1.09. The internal heterogeneity of land cover and heat island effect in Chongqing’s main city was huge. This study quantitatively analyzed the evolution of the heat island effect in the study area to help provide each district with some targeted suggestions for future urban planning.
9 October 2023 in IEEE Transactions on Geoscience and Remote Sensing
Accurate estimates of downward surface shortwave radiation (DSSR) are critical for hydrological, biogeochemical, and ecological studies and remote sensing-based estimation of DSSR is an important way to derive DSSR at different spatio-temporal ranges. However, current estimation algorithms usually somewhat rely on atmospheric parameters or in-situ measurements, further blocking the application of these methods. Inspired by the emerging DSSR reanalysis data from the model simulation, this study proposed an integrated method by initializing the estimation model with ERA5 reanalysis data and further refining the estimation through iterative training. The random forest regression method was applied in the estimation model to build the connection between DSSR with the MODIS top-of-atmosphere reflectance, cloud flag, geometry information, elevation, latitude, and coefficient of Sun-Earth distance as input features. To separately consider the impact from cloud cover, the estimation model was established for clear-sky and cloudy-sky conditions, respectively. The proposed method was applied to estimate instantaneous DSSR of MODIS daytime overpasses in the Southwest part of China in 2020. Comparison between the estimates of the initialized model and the finalized model shows that the iterative process improves the DSSR estimates on both spatial distribution and accuracy. Validated by the measurements from nine sites in the study area, the DSSR estimates of the finalized model show a 0.02 higher correlation coefficient (CC) and 7.35 W m -2 lower root mean squared error (RMSE) than that of the initialized model. To better evaluate the performance of the proposed method, three popular DSSR products including ERA5, MCD18A1, and Himawari-8 were introduced to make an inter-comparison with the estimation of this study. The validation results showed that the all-sky DSSR estimated in this study had the best accuracy, with a CC of 0.90, a mean bias error of 37.80 W m -2 , a RMSE of 125.30 W m -2 , and a relative root mean squared error of 42.73%. Obvious improvements can be observed under cloudy-sky and clear-sky conditions, respectively. Because of the simplicity and reliable performance of the proposed method, it shows good potential for DSSR estimation.
12 December 2022 in IEEE Geoscience and Remote Sensing Letters
In regions with complex terrain, high-spatial-resolution downward surface shortwave radiation (DSSR) is critical for monitoring mountain ecological processes and for environmental management. However, currently available DSSR products are often too coarse (from a kilometer to tens of kilometers) to capture the spatial heterogeneity of DSSR in topographically complex regions. To address this issue, this study proposes a new downscaling method for all-sky instantaneous DSSR, employing a machine learning method, top-of-atmosphere reflectance, and topographic data. The method is used to downscale the 5-km Himawari-8 (H-8) DSSR product to the Sentinel 10 m scale. A region of Southwest China was chosen as a case study. Validated by field measurements from nine stations in 2020, the downscaled DSSR showed improvements in the mean bias error (MBE), mean absolute error (MAE), and root mean square error (RMSE), of 32.74%, 9.31%, and 6.34%, respectively, when compared with the original product. The downscaled DSSR can be generated in all-sky conditions. In general, this method successfully captures high-resolution DSSR over complex terrain, and should be helpful for related studies.