Jie Yu

Dr. Jie Yu

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2020 in IEEE Transactions on Intelligent Transportation Systems
Verified
Journal Article
Closed access
ZWZhengwu Wang
Zhengwu Wang
JYJie Yu
Jie Yu
WHWei Hao
Wei Hao
JXJian Xiang
Jian Xiang
As an emerging urban public transport mode, responsive feeder transit system is flexible and can offer door-to-door services between new districts at margins with low urban transit coverage and trunk bus station. In this study, a joint optimization of running route and scheduling for responsive feeder transit under mixed demand (i.e., reservation and real-time demands) of the time-dependent road network was investigated. A two-stage optimization method was designed together with considering the mixed demands. At the first stage, the initial running route and scheduling were determined according to all reservation demands. At the second stage, the running route and scheduling were continuously optimized based on the real-time demands. The real-time demand responsive strategy, which is built up by using quantitative batch treatment rather than immediate treatment and dynamic route updating strategy for global optimization, were designed by utilizing the submission order of real-time demands. A joint optimization model of running route and scheduling was constructed based on the quantitative batch decision points in the time-dependent road network together with combination of the actual road network. In this model, the minimum total system cost was used, which is composed of the vehicle running costs and passengers' traveling time costs with constraints including vehicle capacity, passengers' time window, and vehicle running time. A solving algorithm based on the adaptive genetic algorithm was designed by considering the characteristics of the joint optimization model.

29 September 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZWZhengwu Wang
Zhengwu Wang
YCyang cai
yang cai
YZYuping Zeng
Yuping Zeng
JYJie Yu
Jie Yu
This paper focuses on the parameter optimization for the CVT (a continuously variable transmission) based plug-in 4WD (4-wheel drive) hybrid electric vehicle powertrain. First, the plug-in 4WD hybrid electric vehicle (plug-in 4WD HEV)’s energy management strategy based on the CD (charge depleting) and CS (charge sustain) mode is developed. Then, the multi-objective optimization’s mathematical model, which aims at minimizing the electric energy consumption under the CD stage, the fuel consumption under the CS stage and the acceleration time from 0–120 km/h, is established. Finally, the multi-objective parameter optimization problem is solved using an evolutionary based non-dominated sorting genetic algorithms-II (NSGA-II) approach. Some of the results are compared with the original scheme and the classical weight approach. Compared with the original scheme, the best compromise solution (i.e., electric energy consumption, fuel consumption and acceleration time) obtained using the NSGA-II approach are reduced by 1.21%, 6.18% and 5.49%, respectively. Compared with the weight approach, the Pareto optimal solutions obtained using NSGA-II approach are better distributed over the entire Pareto optimal front, as well as the best compromise solution is also better.

25 July 2020 in Journal of Advanced Transportation
Verified
Journal Article
Open access
PDF file
ZWZhengwu Wang
Zhengwu Wang
JYJie Yu
Jie Yu
WHWei Hao
Wei Hao
TCTao Chen
Tao Chen
YWYi Wang
Yi Wang
The last mile travelling problem is the most challenging part when using public transit. This study designs a high-freedom responsive feeder transit (HFRFT) system to serve at the transfer station, given vehicle routes, departure time, and service area based on demand. The proposed feeder transit system employs a travelling mode with multitype vehicles. In order to improve the operation of the HFRFT system, the optimization design methods are suggested for vehicle routes, scheduling, and service area. A mixed integer programming model and its hybrid of a metaheuristic algorithm are proposed to efficiently and integrally solve the vehicle routes and scheduling parameters according to the reservation requirements. A heuristic method is proposed to optimize the service area based on the equilibrium of system supply and demand. Case studies show that the mixed running mode of multiple models can significantly improve the seat utilization, which can also significantly reduce the number of departures and the average travel distance per passenger. The proposed service area optimization method is proved to be feasible to improve the last mile travel.

11 January 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
JCJianrong Cai
Jianrong Cai
ZLZhixue Li
Zhixue Li
YXYinghong Xiao
Yinghong Xiao
ZZzhaoming zhou
zhaoming zhou
QLQiong Long
Qiong Long
LZLei Zhang
Lei Zhang
Reversible lanes constitute an important solutions for sustainable transportation, with the aim to solve the practical problem of reversible lane optimization of urban road networks constrained by adjustment time. Considering the relationship between the number of lanes and the capacity of sections, a mixed-integer bilevel programming model of reversible lane optimization constrained by adjustment time is constructed in order to minimize the total travel time of the system. The results show that the model can effectively obtain the optimal strategy for any number of reversible sections subject to adjustment time constraints. With the increase of the number of reversible sections that can be optimized within the adjustment time, the cumulative reduced system time increases monotonically and the road network optimization effect improves, but as a whole, the optimization effect of the newly added reversible sections in each stage shows a decreasing trend. When the number of reversible sections that can be optimized within the adjustment time reaches a certain number, increasing the number of reversible sections will have a limited further effect on the overall system. For the reversible lane optimization problem of urban road networks, only efficient reversible sections need to be optimized to achieve a good optimization effect.

28 April 2022 in Journal of Advanced Transportation
Verified
Journal Article
Open access
PDF file
JCJianrong Cai
Jianrong Cai
JWJianhui Wu
Jianhui Wu
ZLZhixue Li
Zhixue Li
QLQiong Long
Qiong Long
ZZZhaoming Zhou
Zhaoming Zhou
XJXiangjun Jiang
Xiangjun Jiang
To make full use of road resources, improve the operation efficiency of the road network system, and alleviate the coexistence between traffic congestion and road resources idle caused by the traffic tidal phenomenon, the impact of the number of lanes on traffic capacity is examined, and the mixed-integer bilevel programming model for reversible lane optimization is established with the aim to minimalize the total travel time of the system. Taking a test road network as an example, the influence of the reversible lane optimization on characteristic values of sections, the route travel time between OD pairs, and the total time of the system are analyzed. The results indicate that the reversible lane optimization can make full use of the idle road resources and make the road network structure match the travel demands better, and the system index after the reversible lane optimization is obviously better than the original system index.

1 January 2024 in Journal of Advanced Transportation
Verified
Journal Article
Open access
JYJie Yu
Jie Yu
JWJie Wang
Jie Wang
QWQiang Wen
Qiang Wen
TCTao Chen
Tao Chen
Bike‐sharing has a significant impact on commuters’ rational planning of their travel times, which can lead to an advance or delay in the peak passenger flow of the subway system during the morning peak. To explore the impact of bike‐sharing on subway commuters’ choices of departure times, we developed a departure time choice model considering the effect of bike‐sharing. This model considers both constant and linear marginal‐activity utility and compares it with traditional departure time choice models. Research indicates that within the timeframe that ensures on‐time arrival at work, models not accounting for bike‐sharing services underestimate both the departure rate and the total number of commuters compared to actual figures. Specifically, under the constant marginal‐activity utility, about 6.76% of commuters actually choose to depart earlier, while under the linear marginal‐activity utility, this figure is 6.91%. Conversely, during the departure timeframes that lead to late arrival at work, the traditional model overestimates both the departure rate and total number of commuters. Finally, through case analysis, we further revealed the dynamic relationship between commuter departure rates, commuting fatigue, and number of bike‐sharing and calculated the actual commuting costs for different proportions of bike‐sharing. The results indicate that when the number of bike‐sharing reaches 30% of the commuting demand, it can maximally reduce the commuting costs for commuters by approximately 23.32%. These findings offer a crucial basis for optimizing management strategies for morning peak subway commuting.