Keyhole mode Tungsten Inert Gas (K-TIG) welding is a novel advanced deep penetration welding technology which provides an alternative to high power density welding in terms of achieving keyhole mode welding. In order to facilitate welding procedure optimisation in this newly developed welding technology, the relationship among welding parameters, weld formation and tensile properties during the K-TIG welding was investigated in detail. Results show that except for travel speed, the heat input level also plays an important role in forming undercut defect by changing the plasma jet trajectory inside keyhole channel, leading to the formation of hump in the weld centre and exacerbation of undercut formation. Both undercut defect and root side fusion boundary can act as a stress concentration point, which affects the fracture mode and tensile properties considerably. The research results provide a practical guidance of process parameter optimisation and quality assurance for the K-TIG welding process.

The ballistic performance of armour steel welds using austenitic filler materials is poor on account of the disparity in the mechanical properties of the weld and base metals. Consequently, a novel Keyhole Gas Tungsten Arc Welding process with a trapezoidal AISI309 austenitic stainless steel interlayer was developed to tailor chemical composition and microstructure by controlling the solidification sequence. Results show that the dilution rate in the weld metal region can reach up to 43.5% by placing a specially designed interlayer in between the base metal, providing a major scope for microstructure modification. Detailed weld analysis was undertaken by X-ray diffraction, optical and secondary and transmission electron microscopy, energy dispersive spectroscopy and electron back-scattering diffraction. The results from Vickers hardness indents and Charpy impact toughness testing at −40 °C show that the properties of the weld metal region are comparable to that of the base metal. This is ascribed to the weld metal comprising a two phase microstructure of martensite and retained austenite, which contribute to improvements in strength and toughness, respectively. Furthermore, the tailored chemical composition, microstructure and low temperature phase transformation in the weld metal may reduce the tendency toward both solidification cracking and hydrogen assisted cold cracking.