The second batch of Zhuhai-1 microsatellites was successfully launched on 26 April 2018. The batch included four Orbita hyperspectral satellites (referred to as OHS-A, OHS-B, OHS-C, and OHS-D) and one video satellite (OVS-2A), which have excellent hyperspectral data acquisition abilities. For the first time in China, a number of hyperspectral satellite networks have been realized. To ensure the application of hyperspectral remote sensing data, a series of on-orbit geometry processing and accuracy verification studies has been carried out on the “Zhuhai-1” hyperspectral camera since the satellite was launched. This paper presents the geometric processing methods involved in the production of Zhuhai-1 hyperspectral satellite basic products, including geometric calibration and basic product production algorithms. The OHS images were used to perform on-orbit geometric calibration, and the calibration accuracy was better than 0.5 pixels. The registration accuracy of the image spectrum of the basic product after calibration, the single orientation accuracy, and the accuracy of the regional network adjustment were evaluated. The spectral registration accuracy of the OHS basic products is 0.3–0.5 pixels, which is equivalent to the spectral band calibration accuracy. The single orientation accuracy is better than 1.5 pixels and the regional network adjustment accuracy is better than 1.2 pixels. The generated area orthoimages meet the seamless edge requirements, which verifies that the OHS basic product image has good regional mapping capabilities and can meet the application requirements.

GaoFen-3 (GF-3) is a C-band multipolarization synthetic aperture radar (SAR) satellite with 12 imaging modes. However, its initial positioning accuracy remains unsatisfactory, thereby hindering its use for large-area surveying and mapping. This study proposes a block orthorectification method without ground control points (GCPs) using the GF-3 Fine strip II (FSII) mode. To address the challenges with the accuracy and efficiency of this method, an integrated block orthorectification method was developed to conduct integrated processing of large-scale GF-3 satellite images without GCPs. Geometric calibration was used to improve the absolute positioning accuracy of each SAR image. Then, several tie points (TPs) were extracted using the SAR scale-invariant feature transform (SIFT) operator. A parallel matching strategy was used in the block images registration. The block adjustment model was constructed to solve the orientation parameter of all SAR images. The experimental results of 1,468 GF-3 images of China’s entire land area show a TPs root-mean-square error of 0.724 pixel and 8.014 m for the independent checkpoint, suggesting that the proposed method can effectively improve the geometric accuracy of GF-3 satellite images and demonstrate the feasibility of large-scale SAR mapping without GCPs.

The Gaofen-3 (GF-3) satellite is the first C-band multi-polarization synthetic aperture radar (SAR) with the ability of high-accuracy mapping in China. However, the Ground Control Points (GCPs) are essential to ensure the accuracy of mapping for GF-3 SAR imagery at present. In this paper, we analyze the error sources that affect the geometric processing and propose a new block adjustment method without GCPs for GF-3 SAR imagery. Firstly, the geometric calibration of GF-3 image is carried out. Secondly, the rational polynomial coefficient (RPC) model is directly generated after the geometric calibration parameters compensation of each image. Finally, we solve the orientation parameters of the GF-3 images through DEM assisted planar block adjustment and conduct ortho-rectification. With two different imaging modes of GF-3 satellite, which include the QPSI and FS2, we carry out the block adjustment without GCPs. Experimental results of testing areas including Wuhan city and Hubei province in China show that the geometric mosaic accuracy and the absolute positioning accuracy of the orthophoto are better than one pixel, which has laid a good foundation for the application of GF-3 image in global high-accuracy mapping.

The Luojia1-01 satellite provides high-resolution, high-sensitivity nighttime light data at a resolution of 130 m. To effectively use the Luojia1-01 nighttime light data for global applications, the problems of relative and absolute positioning accuracy should be solved. This paper proposes a high accuracy regional geometric processing method of nighttime light imagery. We utilized a nighttime light image matching algorithm to obtain tie points, which are used in the planar block adjustment with ground control points. Then, orthorectification of all images is implemented. Finally, we obtain the nighttime light map of China by mosaicking all the nighttime light orthoimages. According to the experimental results for 275 Luojia1-01 images, the root mean square error of the tie points is 0.983 pixels and the root mean square error of independent checkpoints is 195.491 m (less than 1.5 pixels) after the planar block adjustment. The experimental results prove the validity and feasibility of the proposed method.

Accurate registration between synthetic aperture radar (SAR) images is the basis for high-precision geometric correction of SAR images. The feature points extracted by conventional feature extraction methods are unsatisfactory, which are affected by imaging geometric characteristics and speckle noise of SAR images. This article innovatively proposes a spaceborne SAR image feature learning framework to realize automatic sample generation and model training. It mainly includes two modules: The feature sample generation module based on the initial geometric information of spaceborne SAR. The initial rational polynomial coefficient (RPC) parameters of the spaceborne SAR are adopted to realize the initial positioning of the SAR image, and a variety of feature extraction operators are used to match the overlapping areas to obtain high-precision matching points, which are employed as training samples for image pairs; pseudo-Siamese feature learning network SARPointNet for SAR image feature learning. The pseudo-Siamese network is used to extract the feature points and descriptors of the sample image pairs. The feature optimization process is realized through the descriptor constraints between image pairs, which promotes the network to improve the accuracy of feature extraction. The proposed method has been tested in mountain, hilly, flatland, and urban scenarios, respectively. The results demonstrate that the correspondence points extracted by SARPointNet are evenly distributed, are in large quantities (at least ten times that of other methods), and achieve high precision (the root mean square error is less than 1 pixels), which shows great advantages over other methods.

To ensure the accuracy of large-scale optical stereo image bundle block adjustment, it is necessary to provide well-distributed ground control points (GCPs) with high accuracy. However, it is difficult to acquire control points through field measurements outside the country. Considering the high planimetric accuracy of spaceborne synthetic aperture radar (SAR) images and the high elevation accuracy of satellite-based laser altimetry data, this paper proposes an adjustment method that combines both as control sources, which can be independent from GCPs. Firstly, the SAR digital orthophoto map (DOM)-based planar control points (PCPs) acquisition is realized by multimodal matching, then the laser altimetry data are filtered to obtain laser altimetry points (LAPs), and finally the optical stereo images’ combined adjustment is conducted. The experimental results of Ziyuan-3 (ZY-3) images prove that this method can achieve an accuracy of 7 m in plane and 3 m in elevation after adjustment without relying on GCPs, which lays the technical foundation for a global-scale satellite image process.