The objective of this work was to evaluate the removal of Cu 2+ and Zn 2+ in water by means of the adsorption process using three biosorbents derived from jatropha biomass (bark, endosperm and endosperm + seed coat). The experiments were performed in batch and evaluated the effect of solution pH, adsorbent mass, contact time, different initial concentrations of the metals Cu 2+ and Zn 2+ , and the temperature of the solution during the adsorptive process. By kinetics, the adsorption isotherms and thermodynamics the mechanisms that control the adsorptive process were evaluated. The optimal conditions for the realization of the adsorptive process for both metals were: solution pH of 5.0 and 8 g L -1 of adsorbent mass per volume of solution, with a contact time between adsorbent and adsorbate of 60 min. According to the Langmuir model, the maximum adsorption capacities for the bark, endosperm and endosperm + seed coat of Jatropha were, respectively, for Cu 2+ 11.541, 20.475 and 22.910 mg g -1 , and for Zn 2+ 14.852; 15.888 and 14.674 mg g -1 , with the predominance of chemisorption in monolayer. The three biosorbents derived from the biomass of Jatropha have potential for the remediation of water contaminated with Cu 2+ and Zn 2+ .
The aim of this work was to evaluate the removal of Cd (II) from water using three biosorbents originated from the biomass of jatropha (bark, endosperm, and endosperm + tegument). For that, batch tests were performed to verify the effect of solution pH, adsorbent mass, contact time, initial concentration of Cd (II), and the temperature of the process. The adsorption process was evaluated by the studies of kinetics, isotherms, and thermodynamics. The ideal conditions of solution pH were 5.5 and 8 g L−1 of adsorbent mass of biosorbents by solution volume, with an equilibrium time of 60 min. According to the Langmuir model, the maximum adsorption capacity for bark, endosperm, and bark + endosperm of jatropha was, respectively, 29.665, 19.562, and 34.674 mg g−1, predominating chemisorption in monolayers. The biosorbents presented potential for the remediation of waters contaminated with Cd (II).
O correto incremento da produtividade agrícola deve estar aliado ao avanço tecnológico no conhecimento das exigências nutricionais de cada cultura, proporcionando, dessa forma, o correto uso de insumos na propriedade agrícola. Com o objetivo de estudar a resposta de plantas de soja ao zinco (Zn) em relação a diferentes doses de fósforo (P) e potássio (K), foi realizado este experimento no município de Palotina-PR. O solo foi classificado como Argissolo Vermelho-Amarelo eutrófico. Os tratamentos foram arranjados em esquema fatorial 3x3, constituindo três formas de adubação com P2O5 e K2O: sem adubação, uma vez e duas vezes a recomendação de adubação pela análise de solo e três doses de Zn (0; 2 e 4 kg ha-1). Como fonte de nutrientes, foram utilizados fosfato bicálcico para P, cloreto de potássio para K e sulfato de zinco para Zn. As doses de Zn aplicadas não influenciaram, significativamente, a produtividade, não sendo justificada a sua suplementação na forma de adubação de base. Já a adubação com P2O5 e K2O provocou significativo aumento da produtividade e aumento do número de legumes por planta, com aumento das doses desses nutrientes no solo.
Chromium (as Cr(VI)) and fluoride (F−) are frequently found in effluents from different industrial activities. In cases where these effluents reach soil, it can play an important role in retaining those pollutants. Similarly, different byproducts could act as bio-adsorbents to directly treat polluted waters or to enhance the purging potential of soil. In this work, we used batch-type experiments to study competitive Cr(VI) and F− adsorption in two different soils and several kinds of byproducts. Both soils, as well as mussel shell, oak ash, and hemp waste showed higher adsorption for F−, while pyritic material, pine bark, and sawdust had a higher affinity for Cr(VI). Considering the binary competitive system, a clear competition between both elements in anionic form is shown, with decreases in adsorption of up to 90% for Cr(VI), and of up to 30% for F−. Adsorption results showed better fitting to Freundlich’s than to Langmuir’s model. None of the individual soils or byproducts were able to adsorbing high percentages of both pollutants simultaneously, but it could be highly improved by adding pine bark to increase Cr(VI) adsorption in soils, thus drastically reducing the risks of pollution and deleterious effects on the environment and on public health.
Different antibiotics contained in manure, slurry, wastewater or sewage sludge are spread into the environment. The harmful effects of these antibiotics could be minimized by means of immobilization onto bioadsorbent materials. This work investigates the competitive adsorption/desorption of tetracycline (TC) and sulfadiazine (SDZ) onto pine bark, oak ash and mussel shell. The study was carried out using batch-type experiments in binary systems (with both antibiotics present simultaneously), adding 5 equal concentrations of the antibiotics (between 1 and 50 µmol L−1). The adsorption percentages were higher for TC (close to 100% onto pine bark and oak ash, and between 40 and 85% onto mussel shell) than for SDZ (75–100% onto pine bark, and generally less than 10% on oak ash and mussel shell). Pine bark performed as the best adsorbent since TC adsorption remained close to 100% throughout the entire concentration range tested, while it was between 75 and 100% for SDZ. Desorption was always higher for SDZ than for TC. The results of this study could be useful to design practices to protected environmental compartments receiving discharges that simultaneously contain the two antibiotics here evaluated, and therefore could be relevant in terms of protection of the environment and public health.