Remote sensing is an effective method of evaluating building damage after a large-scale natural disaster, such as an earthquake or a typhoon. In recent years, with the development of computer vision technology, deep learning algorithms have been used for damage assessment from aerial images. In April 2016, a series of earthquakes hit the Kyushu region, Japan, and caused severe damage in the Kumamoto and Oita Prefectures. Numerous buildings collapsed because of the strong and continuous shaking. In this study, a deep learning model called Mask R-CNN was modified to extract residential buildings and estimate their damage levels from post-event aerial images. Our Mask R-CNN model employs an improved feature pyramid network and online hard example mining. Furthermore, a non-maximum suppression algorithm across multiple classes was also applied to improve prediction. The aerial images captured on 29 April 2016 (two weeks after the main shock) in Mashiki Town, Kumamoto Prefecture, were used as the training and test sets. Compared with the field survey results, our model achieved approximately 95% accuracy for building extraction and over 92% accuracy for the detection of severely damaged buildings. The overall classification accuracy for the four damage classes was approximately 88%, demonstrating acceptable performance.
Timely information about landslides during or immediately after an event is an invaluable source for emergency response and management. Using an active sensor, synthetic aperture radar (SAR) can capture images of the earth’s surface regardless of weather conditions and may provide a solution to the problem of mapping landslides when clouds obstruct optical imaging. The 2018 Hokkaido Eastern Iburi earthquake (Mw 6.6) and its aftershocks not only caused major damage with severe loss of life and property but also induced many landslides across the area. To gain a better understanding of the landslides induced by this earthquake, we proposed a method of landslide mapping using pre- and post-event Advanced Land Observation Satellite 2 Phased Array L-band Synthetic Aperture Radar 2 (ALOS-2 PALSAR-2) images acquired from both descending and ascending orbits. Moreover, the accuracy of the classification results was verified by comparisons with high-resolution optical images, and ground truth data (provided by GSI, Japan). The detected landslides show a good match with the reference optical images by visual comparison. The quantitative comparison results showed that a combination of the descending and ascending intensity-based landslide classification had the best accuracy with an overall accuracy and kappa coefficient of 80.1% and 0.45, respectively.
30 April 2006 in Journal of Wind Engineering and Industrial Aerodynamics
This study highlights the major contributing factors to the observed damage distribution in the city of Boumerdès after the 2003 Algeria earthquake. The results of field investigations and statistical analyses show that a majority of the damaged buildings, mostly mid‐rise reinforced concrete (RC) moment‐frame systems, were located on steep slopes and small hilltops, along river valleys. The horizontal‐to‐vertical (H/V) ratios from free‐field microtremor measurements at these sites did not show clear results. In contrast, buildings with the same structural characteristics located on flat ground did not suffer much damage, and clear peaks were observed from the H/V ratio curves. The amplification effects of topography have not been incorporated into the revised Algerian seismic code, but the results from this study show the importance of considering this factor when designing new buildings for earthquake resistance.