This paper presents a graphene-Au coated photonic crystal fiber (PCF) sensor in the visible regime. Designing a side-polish D-shaped plane over the PCF’s defect of the periodic air holes can effectively enhance the evanescent field. Graphene on gold can enhance the sensor’s sensitivity because it can stably adsorb biomolecules and increase the propagation constant of the surface plasmon polariton (SPP). Using the finite element method (FEM), we demonstrated that the sensing performance is greatly improved by optimizing the PCF’s geometric structural parameter. The proposed PCF sensor exhibited high performance with a maximum wavelength sensitivity of 4200 nm/RIU, maximum amplitude sensitivity of 450 RIU⁻¹, and refractive index resolution of 2.3 × 10⁻⁵ RIU in the sensing range 1.32–1.41. This research provides a potential application for the design a new generation of highly sensitive biosensors.

The chiroptical response of the chiral metasurface can be characterized by circular dichroism, which is defined as the absorption difference between left-handed circularly polarized incidence and right-handed circularly incidence. It can be applied in biology, chemistry, optoelectronics, etc. Here, we propose a dynamically tunable chiral metasurface structure, which is composed of two metal split-ring resonators and a graphene layer embedded in dielectric. The structure reflects right-handed circularly polarized waves and absorbs left-handed circularly polarized waves under normal incidence. The overall unit structural parameters of the chiral metasurface were discussed and analyzed, and the circular dichroism was 0.85 at 1.181 THz. Additionally, the digital imaging function can be realized based on the chiral metasurface structure, and the resolution of terahertz digital imaging can be dynamically tuned by changing the Fermi level of graphene. The proposed structure has potential applications in realizing tunable dynamic imaging and other communication fields.

We proposed a refractive index (RI) sensor employing two twisted tapered plastic optical fibers (POFs). The tapered POFs were fabricated by a heating and drawing method and were twisted around each other to form a coupled structure. The sensor consisted of two input ports, a twisted region, and two output ports. The tapered POF could make the light couple from one POF to the other easily. The twisted tapered POFs could constitute a self-referencing sensor, and by monitoring the changes of the coupling ratio, the variations of the external medium RIs could be measured. The RI sensing performances for the sensors with different fiber diameters and twisted region lengths were studied. The sensitivities of 1700%/RIU and −3496%/RIU in the RI ranges of 1.37–1.41 and 1.41–1.44 were obtained, respectively. The sensor is a low-cost solution for liquid RI measurement, which has the features of simple structure and easy fabrication.

A high sensitivity and easily fabricated liquid level sensor based on the V-groove structure plastic optical fiber (POF) was described. In the design, the V-groove structure on the POF is produced by using a die-press-print method, which effectively reduces the complexity of the fabrication process and makes it easier for mass production of liquid level sensors. This greatly enhances the usefulness of the proposed sensor in cost effective liquid level sensing applications. The transmission characteristic of the POF could be changed when the V-groove structure was immerged or emerged by the rising or falling liquid. The liquid level sensing performances for the sensor probes with different structural parameters were investigated, and the sensor performances for the liquids with different refractive indices and the sensor dynamic response were also tested. Experimental results show that the sensor’s sensitivity can reach 0.0698 mm⁻¹, with a resolution of 2.5 mm. Results also show that the sensor has a fast response time of 920 ms.

Tunable multi-function metasurfaces have become the latest research frontiers in planar optics. In this study, a dynamically tunable plasmon-induced transparency (PIT) structure based on a graphene split-ring resonator and graphene ribbon is proposed. The influences of the structural parameters and graphene Fermi energy on the PIT response were investigated both analytically and numerically simulations. The inclusion of an additional vanadium dioxide (VO₂) substrate layer enables the metasurface to achieve dynamic switching between PIT and perfect absorption using the phase change property of VO₂. The new metasurface device exhibits the PIT effect when the VO₂ layer is in an insulating state and acts as a perfect absorber when it is in a metallic state. Moreover, the response of the two functions can be easily adjusted dynamically by changing the Fermi energy of graphene. In addition, both functions were highly sensitive to changes in the ambient refractive index. The results of this work have potential applications in slow-light devices, optical switches, modulators, perfect absorbers, highly sensitive sensors, and multifunctional devices.

A simple structure and easily fabricated displacement sensor was proposed and demonstrated based on a bending-induced fiber interferometer. In the design, the fiber interferometer was formed only by bending the single-mode fiber into a small U-shape without splicing, tapering, or heating pre-processing, which effectively reduces the complexity of the fabrication process, greatly enhances the mechanical strength of the sensor, and lowers the cost in the displacement sensing applications. The displacement sensing performances for the sensor with different bending radii of 3.3 mm, 4.4 mm, 5.0 mm, and 6.3 mm were investigated. Experimental results showed that the sensor had a good linear response, and for the bending radii of 3.3, 4.4, 5.0, and 6.3 mm, the proposed sensors showed high sensitivities of 134.3, 105.1, 120.9, and 144.1 pm/μm, respectively.