A ZigBee based wireless sensor network is implemented in this paper which is of low-cost solar-powered air quality monitoring system. The main objective of the proposed architecture is to interfacing various sensors to measure the sensor analog data and displayed in LabVIEW on the monitor using the graphical user interface (GUI). The real time ambient air quality monitoring in smart cities is of greater significance for the health of people. The wireless network sensor nodes are placed at different traffic signals in the smart cities which collect and report real-time data on different gases which are present in the environment such as carbon monoxide (CO), nitrogen dioxide (NO2), methane (CH4) and humidity. The proposed system allows smart cities to monitor air quality conditions on a desktop/laptop computer through an application designed using graphical programming based LabVIEW software and provides an alert if the air quality characteristics exceed acceptable levels. The sensor network was successfully tested on the campus of the institute of aeronautical engineering, Hyderabad. The sensor data are indicated by different indicators on the front panel of LabVIEW and also different charts are plotted with respect to time and amplitude which explains the severity of polluted areas.

In the emerging nanotechnology, a finest potential alternative to transistor-based technology is Quantum-dot cellular automata (QCA). It promises higher device density and lower power consumption. The predominant application of QCA is the realization of configurable blocks in the digital systems. This paper presents a new serial scan register and a boundary scan cell, essential components used for chip-level and system-level testing. The proposed majority logic gate-based 1-bit clocked D-flip-flop (DFF) and the rotating multiplexer is used in these techniques. In the first attempt, the clocked DFF is further extended to implement the 2-bit, 4-bit, serial shift register and scan flip-flop. The detailed structural and performance analysis in different aspects proves that the proposed circuits offer elevated performance in contrast to earlier reported works. The various circuit comparison factors that are to be considered in QCA are the circuit complexity, area, delay in terms of the number of clocks, and energy dissipation. Significant improvements have been enhanced in the proposed layouts as compared to traditional approaches. In addition, power dissipation analysis of the stated DFF would be carried out at 2 K Temperature using different tunnelling energy levels (0.5, 1.0, and 1.5 Ek). All the simulations are performed using QCA Designer Ver. 2.0.3 and the power analysis is performed by QCA Pro tool Ver. 1.0.

In the present technological developments, the internet of things (IoT) technology connects all interconnected networks. The attacks on women are increasing daily in Indian countries. If the woman is not carrying a mobile phone or device, she cannot contact the police station or other family members. This proposed method will help the women identify the exact location and inform the police station in such a scenario. The Emergencies, the women, can press the button once the location information is tracked. The purpose of this project is to help women in emergencies. Location tracking and short service messages are also sent to the family members and nearby police stations.

Digital Audio Broadcasting (DAB) is an amazing technology, achieving its promise of certainly delivering high quality digital audio in the most vindicate mobile and fixed receiver environments. The radio signal processing capability can be provided by Universal software radio peripheral (USRP) hardware. The received signal frequency can be controlled and transmitting the signal through wireless is possible by installing NI USRP utility configuration. The programmable USRP was running the VI snippet program in block diagram panel with radio companion integrated through USB cable on windows 7 64. With the parameters such as IQ rate, transmitter gain, carrier frequency along with device name which is given as ni2901_1 the students can able to tune the radio signal. DAB technology is integrated with USRP device using prominent OFDM technique for promise delivery of high quality audio signal. DAB works under four transmission modes in this paper. In this paper RF0 module is used USRP device is connected with dual band vertical antenna with 2.4 and 5GHz frequency as Tx1. This transmitting VI snippet program will support all file formats such as.wav, mp3, etc. the intention of the paper is to transmit the real time data through long distance using DAB technology in remote laboratory. The proposed system is implemented in virtual lab so that it can be accessed by any user from anywhere. This system is successfully tested on institute of aeronautical engineering virtual lab.

A remote monitoring and control are one of the most important criteria for maximizing the production in any industry. With the development of modern industry the requirement for industrial monitoring system is getting higher. This project explains the real time scenario of monitoring temperature and humidity in industries. National Instruments my RIO is used and results are observed on Lab VIEW and VI Server. The server VI program and client VI program is developed in block diagram for the two sensor data. This proposed system develops a sensor interface device essential for sensor data acquisition of industrial Wireless Sensor Networks (WSN) in Internet of Things (IOT) environment. By detecting the values of sensors like temperature, humidity present in the industrial area. The results are displayed on the web page. The data can be accessed with admin name and password. After logging into the web page the index of files is displayed. After restarting the mine RIO kit and initiate the deploying process the nations will display log.csv file. By double clicking the file the excel sheet will appear on the computer. This VI server is tested for its working, using a data acquisition web application using a standard web browser. The critical situation can be avoided and preventive measures are successfully implemented.