The challenge to reversing the layer sequence of organic photovoltaics (OPVs) is to prepare a selective contact bottom cathode and to achieve a suitable morphology for carrier collection in the inverted structure. The authors report the creation of an efficient electron selective bottom contact based on a solution-processed titanium oxide interfacial layer on the top of indium tin oxide. The use of o-xylene as a solvent creates an efficient carrier collection network with little vertical phase segregation, providing sufficient performance for both regular and inverted solar cells. The authors demonstrate inverted layer sequence OPVs with AM 1.5 calibrated power conversion efficiencies of over 3%.
Here we report enhanced efficiency bulk heterojunction organic solar cells using blend films of regioregular poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) (PCBM) that are subjected to a thermal annealing process. Blend films ( by weight) were prepared using chlorobenzene and 1,2-dichlorobenzene in order to investigate the role of the solvent. Irrespective of the chosen solvent, the optimal device annealing temperature was found to be 140 °C. The highest power conversion efficiency, 3% under air mass 1.5 simulated solar illumination , was achieved by device annealing at 140 °C for 15 min using blend films prepared from chlorobenzene (2.3% for 1,2-dichlorobenzene).