The as-synthesised Fe 3 O 4 @Bi 2 O 3 /C significantly inhibited the recombination of electron–hole pairs and improved the tetracycline degradation efficiency.
1 February 2016 in Desalination and Water Treatment
In the work, magnetically separable adsorbent, named chitosan (CTS)/halloysite nanotubes (HNT)HNT-Fe3O4 microspheres are prepared by emulsion cross-linking method and characterized by Fourier transform infrared spectroscopic analysis, vibrating sample magnetometer, X-ray powder diffraction, scanning electron microscope, and transmission electron microscopy. The microspheres are applied as adsorbents for the removal of tetracycline (TC) from aqueous solution. The effects of the initial concentration of TCs solution (C0), temperature, initial pH value (pH0) of TC solution, and the adsorption dose on the adsorption capacity of the microspheres are investigated. The optimum pH value for TC adsorption is found at pH 5.0, and the adsorption capacity increased with the increase in adsorption temperature. The adsorption kinetics is better described by the pseudo-second-order equation, and their adsorption isotherms are better fitted to the Langmuir equation. CTS/HNT-Fe3O4 microspheres could be easily separated from the aqueous solution in a magnetic field. The adsorption–desorption experiments implied that CTS/HNT-Fe3O4 microspheres can be used as promising adsorbents for the removal of TC from wastewater HNT.
In our research, we investigated the potential of HNT-Fe3O4, a magnetic adsorbent composed of halloysite nanotubes(HNTs) and iron oxide nanoparticles, for removing tetracyclines(TCs) from water. We utilized a range of analytical techniques such as FT-IR, VSM, XRD, BET, TEM, TGA, and SEM to characterize the materials. Furthermore, we evaluated HNT-Fe3O4’s capability to remove TCs from water, particularly noting the influence of solution pH on its adsorption properties. Results indicated that the adsorption process adhered to the pseudo-second-order kinetics, with the Langmuir model best describing the adsorption isotherms. The reusability study revealed that after six repeated uses, HNT-Fe3O4 maintained most of its adsorption efficiency. An adsorption–desorption experiment further confirmed its potential as a valuable adsorbent for wastewater treatment. In summary, our study underscores the potential of HNT-Fe3O4 as a durable and effective medium for TCs removal in water treatment.
A lamellar nanostructure consisting of anatase TiO2/BiOCl was effectively developed while employing the approach of solvothermal. The samples underwent comprehensive analysis of their phase structures, morphologies, surface areas, optical properties, and electronic states using various techniques including x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) method, UV–vis diffuse reflectance spectra (UV–vis DRS), Fourier transform infrared spectroscopy (FTIR), and photoluminescence spectroscopy(PL). The photoelectrochemical data demonstrated that the incorporation of anatase TiO2 nanoparticles into the BiOCl lamellar structure significantly improved its photocatalytic efficiency to degrade Malachite Green (MG) in UV light, surpassing the performance of both pure BiOCl and anatase TiO2. Additionally, the study delved into the photocatalytic mechanism responsible for this enhanced performance. The superior photocatalytic efficiency of the anatase TiO2/BiOCl composites can be ascribed to higher surface area, smaller crystallite size, stronger light absorption and improved charge separation efficiency.
In this study, the novel tin-based catalysts (Sn(II)/PN@AC) were prepared using the phosphorus and nitrogen dual-modified activated carbon as support and SnCl2 as active compounds, as well as then evaluated in acetylene hydrochlorination. Under the reaction temperature of 180 °C and an acetylene gas hourly space velocity (GHSV-C2H2) of 30 h–1, the 15%Sn(II)/PN@AC-550 showed the initial acetylene conversion of 100% and vinyl chloride selectivity over 98.5%. Additionally, the deactivation rate of 15%Sn(II)/PN@AC-550 reached 0.47% h–1, which was lower than that of 15%Sn(II)/AC-550 (1.02% h–1), suggesting that PN@AC-550 as novel support can retarded the deactivation of Sn(II)/AC-550 catalysts during acetylene hydrochlorination. Based on the catalytic tests and characterization results (XRD, Raman, BET surface area, TEM, C2H2-TPD, H2-TPR, XPS, FT-IR, TGA, and ICP), it demonstrated that PN@AC-550 as support could effectively improve the dispersion of tin species, retard the formation of coke deposition, lessen the oxidation of SnCl2 during the preparation process, as well as relatively inhibit the leach of tin species during the reaction. By combing the FTIR results and Rideal–Eley mechanism, we proposed that that HSnCl3 was transition state of SnCl2 in catalysis acetylene hydrochlorination and then adsorbed the acetylene to produce the vinyl chloride.