Shimmy motion may occur for an aircraft nose landing gear (NLG) during its takeoff, landing, and taxiing procedure, which is an undesirable motion and should be suppressed. Here, a novel torsional nonlinear energy sink (NES) based on the cam-roller mechanism is proposed and applied in the NLG to improve its shimmy performance. The torsional NES is connected with the upper and lower struts of the NLG and its mechanical characteristic is studied. A seven-dimensional dynamic model of the NLG coupled with NES is built, which considers the NLG torsional and lateral motions, and the nonlinear tire model. The numerical continuation method is applied to analyze its shimmy performance, the stable area and limit cycle oscillation (LCO) amplitude are acquired, further compared with those of the original NLG without using the NES. The results show that as the NES is used in the NLG, the torsional shimmy dominated unstable area reduces significantly and the lateral shimmy dominated unstable area decreases slightly, which results in the increase of the stable area of the NLG; the maximum LCO amplitudes for the NLG torsional and lateral shimmy become smaller, the forward speed ranges as the torsional and lateral shimmy occur become narrower, which indicates that the stable forward speed ranges of the NLG become wider; the NLG shimmy performance improves as the NES has larger torsional inertia and damping, and smaller torsional linear stiffness. Thus, the NES can suppress the NLG shimmy motion and enhance its shimmy performance effectively.
26 November 2024 in Sensors and Actuators B: Chemical
Due to intricate operating conditions, including structural clearances and assembly deviations, the acquisition of test data of landing gear retraction mechanism is limited, posing challenges for reliability analysis. To solve the problem, a Bayesian-based reliability analysis method by fusing prior and test data is proposed, focusing on the mechanism kinematic accuracy under small-sample conditions. Firstly, a dynamic simulation model is established to collect prior data, and retraction tests are conducted to obtain test data. Then, based on Bayesian theory, the motion accuracy parameter estimation model integrating prior and test samples is established. To obtain accurate hyper parameters, the prior samples are expanded using neural network. Finally, taking the retraction mechanism as the research object, the kinematic accuracy reliability is quantified, and the impact of uncertainty factors is analyzed in depth. The results show that the proposed method is superior to the classical interval estimation method in stability and effectively mitigates the impact of uncertainty factors.
To design and analyze a hook lock mechanism for a certain type of aircraft landing gear, numerical continuation and bifurcation theory are employed to study the performance of the lock mechanism in this paper. First, dynamic and static models of the hook lock mechanism are created separately, and by analyzing the locking and unlocking processes of the lock mechanism, the dynamic results are compared with the static numerical continuation results. According to the results, the static numerical continuation results agree excellently with the dynamic model results at the position of the stable equilibrium solution. Although the dynamic results can hardly explain the jump phenomenon of the lock mechanism at the moment of locking or unlocking, the bifurcation point of the static results suggests the occurrence of a stability change in the lock mechanism at the moment of jumping, thereby explaining the jumping mechanism of the lock mechanism. Therefore, the influences of the landing gear overload, lock spring parameters and attachment position on the performance of the lock mechanism are investigated. Furthermore, the critical installation position of the limit stop is defined, and the critical unlocking force of the lock mechanism is designed optimally based on the multi-island genetic algorithm.
Under the coupling effect of node position deviation, joint clearance and wear factors, the complex landing gear retraction mechanism suffers from low kinematic accuracy, slow retraction performance and shortened reliable life. Addressing these issues, a time-dependent reliability analysis and optimisation design method for the kinematic accuracy of the retraction mechanism is proposed, considering the uncertainty of node position deviation, initial clearance, and dynamic multi-joint wear. Initially, a wear prediction model and a dynamic model of the retraction mechanism considering node position deviation and joint clearance are established to analyse their influence on retraction accuracy and joint wear depth. Subsequent retraction testing under various working conditions is conducted to ascertain the critical failure condition and validate the simulation model. The time-dependent kinematic accuracy reliability model, accounting for the dynamic evolution of wear clearance, is then established to assess reliability variation with retraction cycles. Finally, the reliability optimisation design focusing on hole-axis matching accuracy aims to strike a balance between accuracy cost and reliability, thereby enhancing performance and prolonging operational life.