Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

The performance of waterborne (meth)acrylic coatings is critically affected by the film formation process, in which the individual polymer particles must join to form a continuous film. Consequently, the waterborne polymers present lower performance than their solvent-borne counter-polymers. To decrease this effect, in this work, ionic complexation between oppositely charged polymer particles was introduced and its effect on the performance of waterborne polymer films was studied. The (meth)acrylic particles were charged by the addition of a small amount of ionic monomers, such as sodium styrene sulfonate and 2-(dimethylamino)ethyl methacrylate. Density functional theory calculations showed that the interaction between the selected main charges of the respective functional monomers (sulfonate–amine) is favored against the interactions with their counter ions (sulfonate–Na and amine–H). To induce ionic complexation, the oppositely charged latexes were blended, either based on the same number of charges or the same number of particles. The performance of the ionic complexed coatings was determined by means of tensile tests and water uptake measurements. The ionic complexed films were compared with reference films obtained at pH at which the cationic charges were in neutral form. The mechanical resistance was raised slightly by ionic bonding between particles, producing much more flexible films, whereas the water penetration within the polymeric films was considerably hindered. By exploring the process of polymer chains interdiffusion using Fluorescence Resonance Energy Transfer (FRET) analysis, it was found that the ionic complexation was established between the particles, which reduced significantly the interdiffusion process of polymer chains. The presented ionic complexes of sulfonate–amine functionalized particles open a promising approach for reinforcing waterborne coatings.

Novel partially degradable waterborne pressure sensitive adhesives can be easily removed from substrates under mild alkali conditions opening the door for sustainable (less solvent and energy consumption) recycling processes.

Polymeric derivatives of itaconic acid are gaining interest as biobased alternatives to petroleum-based monomers due to their versatility, renewable nature, commercial availability, and cost-effectiveness. Itaconate ester monomer's challenges incorporating in (meth)acrylic waterborne polymers are the low propagation rate, unfavorable reactivity ratios, and the depropagation process. To overcome these challenges, the seeded semibatch emulsion polymerization of 100% biobased dibutyl itaconate, methyl methacrylate, and butyl acrylate was investigated at different temperatures. Consequently, 30 wt % DBI was successfully incorporated within waterborne (meth)acrylates in short reaction times (4 h), obtaining high DBI incorporation (>90%). The results demonstrate that DBI incorporation influences the instantaneous monomer conversion, polymer's microstructure, and mechanical properties. By incorporating a biobased itaconate cross-linker, kinetics and mechanical characteristics of the polymers were improved. This combined approach can be implemented without altering industrial processes, resolving the commercialization dilemma for itaconate monomers to synthesize high-performance biobased polymers for adhesive and coating industries.