Guodong Zhang

Guodong Zhang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Materials Research Express
Verified
Journal Article
Open access
QWQiyu Wang
Qiyu Wang
HYHui Yang
Hui Yang
XLXiaohong Li
Xiaohong Li
GZGuodong Zhang
Guodong Zhang
The corrosion mechanism of three aluminum ingot mold materials used by Chinese aluminum electrolytic enterprises in molten aluminum was studied: The three materials are pearlite cast iron(PCI) contains vermicular graphite, lamellar graphite, and spherical graphite respectively. After 800 °C molten aluminum corrosion for 4 h, the intermetallic compound (IMC) layers of Fe2Al5 and FeAl3 is formed at the interface. It was found that the volume of spherical graphite in IMC was reduced to 20%, and lamellar graphite aggregated in the IMC layer. The average thickness of the Fe2Al5 layer in PCI1, PCI2 and PCI3 is about 180 μm, 100 μm and 101 μm, respectively. The weight loss rate of PCI1 is 2.57 (mg cm−2)min−1, PCI2 is 2.20 (mg cm−2)min−1, and PCI3 is 2.24(mg cm−2)min−1. There are dispersed Cr and Mo carbides in the IMC layer. Si-rich ribbon-shaped region was found at the interface between cast iron and IMC. The needle-like precipitates (Al4C3) were observed only at the only at the boundary between cast iron and IMC in PCI1.

2 August 2020 in Inorganic and Nano-Metal Chemistry
Verified
Journal Article
Closed access
QWQiyu Wang
Qiyu Wang
CZChu Zhang
Chu Zhang
HZHui Zhang
Hui Zhang
GZGuodong Zhang
Guodong Zhang
A closing synthesis device with special structure was designed to effectively collect the ZnO synthesized via self-propagating high temperature synthesis (SHS) method. With this device, the influence of CaF(2)on products was investigated. Products were characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD). Results showed that with the increase of CaF2, there is a trend of first increase and following decrease in the yield of products and there appears increasing amount of one-dimensional ZnO nanostructures and there are no obvious changes on the structure of products. Possible mechanisms of the influence of CaF(2)on products were discussed.