This paper presents a reduced-scale physical model of a mine stope used to reproduce the underground stope backfilling practiced in some Canadian mines. The objective is to study the geomechanical behavior of the waste rock barricades in interaction with the mine backfill. The instrumentations, along with visual observations and preliminary results, are presented. The main results demonstrated that: (i) the stability of the barricade depends on its physical properties (e.g., size, location, particles gradation and compaction) and the frictional behavior at the barricade/drift walls interface, and (ii) for two backfill formulations, cemented and uncemented, prepared with 70% of solid mass concentration, the volumetric strain due to self-weight consolidation of the backfilled room was higher for uncemented backfill (16%) than for the cemented one (4.5%). In addition, the results highlighted the importance of using shotcrete around the downstream face of the barricade, mostly at the top, to close the gaps and bind the barricade particles, which improves its stability.
4 December 2013 in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
This paper focuses on effective poroelastic properties of materials constituted by an isotropic homogeneous solid matrix containing non ellipsoidal pores. In the frame of effective media theory (EMT), property contribution tensor approach extended to non ellipsoidal inhomogeneities is used to estimate effective poroelastic properties. On the basis of recent results obtained by the authors, two reference 3D shapes are considered: supersphere and superspheroid, characterized by a concavity parameter and being convex or concave. Related compliance contribution tensors respectively verify cubic and transversely isotropic symmetries have been characterized thanks to 3D finite element modellings and obtained analytical approximation formula are used in this paper. Analysis is focused on the effect of the parameter characterizing concavity on effective poroelastic coefficients. Non interaction approximation (NIA), Mori Tanaka, and Maxwell homogenization schemes are compared. It is shown that concavity parameter is of major importance as may be aspect ratio of spheroidal pores.
18 June 2020 in European Journal of Environmental and Civil Engineering
This paper focuses on effective elastic properties, and thermal conductivity of materials constituted by an isotropic homogeneous solid matrix containing both ellipsoidal and non-ellipsoidal pores. In the frame of Effective Media Theory (EMT), property contribution tensor approach extended to non-ellipsoidal inhomogeneities are used to estimate effective elastic properties and thermal conductivity. On the basis of recent results obtained by the authors, a reference 3D shape is considered: supersphere characterised by a concavity parameter and being convex or concave. Related compliance contribution tensors verifying cubic symmetry have been characterised thanks to 3 D finite element modelling and analytical approximation formula have been derived and are used in this paper. Analysis is focussed on the effect of the parameter characterising concavity on both effective elastic coefficients and thermal conductivity. Application to isotropic porous rock with two separated classes of pores, such as oolitic limestones, is considered. Numerical results are presented for a reference oolitic rock, Lavoux limestone. Maxwell, Self-Consistent and Differential schemes are compared. It is shown that concavity parameter is of major importance as may be aspect ratio of spheroidal pores, and that the three reference schemes may conduce to comparable results for the particular investigated microstructure, characterised by a high volume fraction of porous grains (oolites)