The electric arc furnace is the main process unit in scrap‐based steelmaking. Owing to its importance, numerous mathematical models for predicting the course of the electric arc furnace process have been developed. This article reviews mathematical process models proposed in the literature, identifying the most common modeling approaches, and uses mathematical descriptions for the main phenomena. Furthermore, the validation of such models is discussed in detail. Finally, the article identifies gaps in the existing knowledge and provides suggestions for the further development of mathematical process models.
Steelmaking based on direct reduced iron (DRI, and its compacted derivative hot briquetted iron, HBI) is an anticipated important global alternative to current steel production based on FeOx reduction in blast furnaces due to its lower specific CO2 emission. The majority of DRI is melted and refined in the electric arc furnace with different process conditions compared to the melting of steel scrap due to its raw material composition being rather different. We provide data and analysis of slag composition of DRI charges vs. steel scrap charges for 16 industrial electric arc furnaces (EAFs). Suggestions for optimized slag operation and resulting process improvements of DRI melting in the EAF are given. A dynamic mass and energy model of the DRI melting in the EAF is introduced to illustrate the implications of the adapted slag operation on the EAF process with DRI charges.
A simulator and an algorithm for the automatic creation of operation charts based on process conditions were developed on the basis of an existing comprehensive electric arc furnace process model. The simulator allows direct user input and real-time display of results during the simulation, making it usable for training and teaching of electric arc furnace operators. The automatic control feature offers a quick and automated evaluation of a large number of scenarios or changes in process conditions, raw materials, or equipment used. The operation chart is adjusted automatically to give comparable conditions at tapping and allows the assessment of the necessary changes in the operating strategy as well as their effect on productivity, energy, and resource consumption, along with process emissions.
2 July 2019 in Metallurgical and Materials Transactions B
The electric arc furnace (EAF) represents the most important process route for recycling of steel and the second most productive steelmaking process overall. Considering the large production quantities, the EAF process is subject to continuous optimization, and even small improvements can lead to a significant reduction in resource consumption and operating cost. A common way to investigate the furnace operation is through the application of mathematical models. In this study the applicability of three different statistical modeling approaches for prediction of the electric energy demand is investigated by using more than 21,000 heats from five industrial-size EAFs. In this context, particular consideration is given to the difference between linear and nonlinear regression models. Detailed information on the treatment of the process data is provided and the applied methods for regression are described in short, including information on the choice of hyperparameters. Subsequently, the results of the models are compared. Gaussian process regression (GPR) was found to yield the best overall accuracy; however, the benefit of applying nonlinear models varied between the investigated furnaces. In this regard, possible reasons for the inconsistent performance of the methods are discussed.
The determination of view factors (VF) is a central component of the heat transfer model in comprehensive electric arc furnace process models. Due to the complex nature of the process, simplifying assumptions are necessary to allow the efficient estimation of VF. These simplifications mainly deal with the geometrical representation of the furnace and the methods to calculate the resulting VF. Such assumptions have been applied in several studies; however, while the results of the complete process models have been validated extensively, the calculated VF have not been examined in detail. Herein, two methods of calculating VF based on a geometry similar to that used in the process models proposed by MacRosty et al., Logar et al., and Meier et al. are presented and validated by comparing the results obtained using a commercial computational fluid dynamics software. The number of assumptions and simplifications is reduced when compared with previously published results and both methods are proven to be accurate while remaining computationally efficient enough for the application in process models for online applications and process optimization, where fast execution is necessary.