In this work, nine bi-layer knitted samples with varied knitting structures and made up of different yarn compositions were fabricated, and their thermal comfort properties were investigated. The thermal comfort properties were evaluated by breathability, water transfer properties, thermo-physiology properties and dynamic cooling properties, and their relationship with fabric knitting structure and yarn composition were investigated statistically. It was observed that bi-layer knitted fabrics with meshes at one side had better air permeability, moisture management properties, drying performance, thermo-physiological properties and dynamic cooling function, but lower wicking height than bi-layer knitted fabrics with trim and symmetrical structure (without meshes). The composition of nylon and polyester filaments with varied wettability as outer and inners layer of bi-layer knitted fabrics, respectively, improved the water one-way transport capacity significantly. In particular, bi-layer fabrics with asymmetric structure and made up of yarns with varied hydrophilicity as each layer have excellent moisture management capacity. Moreover, fabrics made up of yarns with finer fibers exhibited better thermal comfort properties.

The thermal-wet-comfort characteristic of fabrics is primary to clothing for human bodies. The comfort aptitudes in the fabrics increase the significance of attire and are gaining more interest in the global market. Therefore, the purpose of this study is to analyze the influence of finishing patterns and fabric structure parameters on the comfort performance, air permeability, wicking effect, one-way water transport properties and thermal-physiological properties of unidirectional water transport knitted polyester fabrics. Eight samples are developed by hydrophobic finishing, which possessed good moisture management properties. The result implies that with the intensity of pores, there is an increase in the capillary effect of moisture absorption and transportation in the fabrics. Further, the escalation of the hydrophilic area to a hydrophobic area and regularity in the finishing pattern make the fabrics better in performance for unidirectional water transmission and thermal-wet comfortability. The statistical analysis indicates that the fabric structure and finishing patterns have a significant effect (p = 0.01) on moisture management properties. The fabric with a rib air structure and finishing pattern with ratio (69%) of the hydrophilic area to the hydrophobic area has the best regularity and moisture management property.

Biodegradable intravascular stent has attracted more and more focus in recent years as an effective solution for angiostenosis. Ideal stents were expected to exhibit sufficient radial force to support the vascular wall, while suitable flexibility for the angioplasty. After vascular remodeling, stents should be degraded into small molecular and be eliminated from human body, causing no potential risk. In this paper, poly-p-dioxanone (PDO) monofilament was braided into net structure with four different braiding density, two of which exhibited sufficient radial force larger than 30 kPa, and three of which showed the bending rigidity within 11.7–88.1 N•mm². The degradation behaviors of monofilaments and stents have been observed for 16 weeks. The findings obtained indicate that degradation first occurred in morphology region, which induced temporary increase of crystallinity, monofilament bending rigidity and stent mechanical properties. During this period, monofilament tends to be hard and brittle and lost its tensile properties. Then the crystalline region was degraded and stent mechanical properties decreased. All the results reveal that the PDO intravascular stents with braided structure were able to afford at least 10 weeks of sufficient support to the vascular wall.

It is difficult to meet the needs of multi-functional comfortable fabric through the single functional fibers on the market. The aim of this work was to develop a kind of summer comfortable woven fabric with coolness through the combination of different functional fibers. Blended yarn of bamboo and polyester with grooves was chosen as the warp yarn, which was responsible for moisture absorption and transportation. Nylon filament with a cross-section and fine-denier polyester filament was chosen to twist reversely as a composite weft yarn to provide the coolness function and moisture conduction for fabric. As a comparative weft yarn, polyethylene was chosen as another type of weft yarn. Twelve samples were prepared containing three structures. The effects of fabric structure, weft yarn composition and fineness on the coolness and thermal-wet comfort were evaluated and investigated, including thermal-physiological comfort properties, moisture management properties, the wicking effect and the drying performance. The result showed that the weave structure, weft yarn composition and fineness had a significant influence on the coolness and thermal-wet comfort properties. Fabric woven with plain weave structure contributed to heat dissipation and dynamic coolness. The float yarn in the 2/1 twill and mesh structure was beneficial to promote water transportation vertically. The results also suggested that polyethylene yarn was preferred for coolness fabric, but the liquid moisture management and drying performance of polyethylene fabric should be further improved.