Considering large and complex areas like the Tibetan Plateau, an analysis of the spatial distribution of the solar radiative budget over time not only requires the use of satellite remote sensing data, but also of an algorithm that accounts for strong variations of topography. Therefore, this research aims at developing a method to produce time series of solar radiative fluxes at high temporal and spatial resolution based on observed surface and atmosphere properties and topography. The objective is to account for the heterogeneity of the land surface using multiple land surface and atmospheric MODIS data products combined with a digital elevation model to produce estimations daily at the kilometric level. The developed approach led to the production of a three-year time series (2008–2010) of daily solar radiation budget at one kilometer spatial resolution across the Tibetan Plateau. The validation showed that the main improvement from the proposed method is a higher spatial and temporal resolution as compared to existing products. However, even if the solar radiation estimates are satisfying on clear sky conditions, the algorithm is less reliable under cloudy sky condition and the albedo product used here has a too coarse temporal resolution and is not accurate enough over rugged terrain.

Several methods currently exist to efficiently correct topographic effects on the radiance measured by satellites. Most of those methods use topographic information and satellite data at the same spatial resolution. In this study, the 30 m spatial resolution data of the Digital Elevation Model (DEM) from ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) are used to account for those topographic effects when retrieving land surface reflectance from satellite data at lower spatial resolution (e.g., 1 km). The methodology integrates the effects of sub-pixel topography on the estimation of the total irradiance received at the surface considering direct, diffuse and terrain irradiance. The corrected total irradiance is then used to compute the topographically corrected surface reflectance. The proposed method has been developed to be applied on various kilometric pixel size satellite data. In this study, it was tested and validated with synthetic Landsat data aggregated at 1 km. The results obtained after a sub-pixel topographic correction are compared with the ones obtained after a pixel level topographic correction and show that in rough terrain, the sub-pixel topography correction method provides better results even if it tends to slightly overestimate the retrieved land surface reflectance in some cases.

Pluvial floods caused by extreme overland flow inland account for half of all flood damage claims each year along with fluvial floods. In order to increase confidence in pluvial flood susceptibility mapping, overland flow models need to be intensively evaluated using observations from past events. However, most remote-sensing-based flood detection techniques only focus on the identification of degradations and/or water pixels in the close vicinity of overflowing streams after heavy rainfall. Many occurrences of pluvial-flood-induced damages such as soil erosion, gullies, landslides and mudflows located further away from the stream are thus often unrevealed. To fill this gap, a transferable remote sensing fusion method called FuSVIPR, for Fusion of Sentinel-2 & Very high resolution Imagery for Pluvial Runoff, is developed to produce damage-detection maps. Based on very high spatial resolution optical imagery (from Pléiades satellites or airborne sensors) combined with 10 m change images from Sentinel-2 satellites, the Random Forest and U-net machine/deep learning techniques are separately trained and compared to locate pluvial flood footprints on the ground at 0.5 m spatial resolution following heavy weather events. In this work, three flash flood events in the Aude and Alpes-Maritimes departments in the South of France are investigated, covering over more than 160 km² of rural and periurban areas between 2018 and 2020. Pluvial-flood-detection accuracies hover around 75% (with a minimum area detection ratio for annotated ground truths of 25%), and false-positive rates mostly below 2% are achieved on all three distinct events using a cross-site validation framework. FuSVIPR is then further evaluated on the latest devastating flash floods of April 2022 in the Durban area (South Africa), without additional training. Very good agreement with the impact maps produced in the context of the International Charter “Space and Major Disasters” are reached with similar performance figures. These results emphasize the high generalization capability of this method to locate pluvial floods at any time of the year and over diverse regions worldwide using a very high spatial resolution visible product and two Sentinel-2 images. The resulting impact maps have high potential for helping thorough evaluation and improvement of surface water inundation models and boosting extreme precipitation downscaling at a very high spatial resolution.

The CAMCATT-AI4GEO extensive field experiment took place in Toulouse, a city in the southwest of France, from 14^th to 25^th June 2021 (with complementary measurements performed on the 6 September 2021). Its main objective was the acquisition of a new reference dataset on an urban site to support the development and validation of data products from the future thermal infrared (TIR) satellite missions such as TRISHNA (CNES/ISRO), LSTM (ESA) and SBG (NASA). With their high spatial (between 30-60m) and temporal (2-3 days) resolutions, the future TIR satellite data will allow a better investigation of the urban climate at the neighbourhood scale. However, in order to validate the future products of these missions such as LST, air temperature, comfort index and Urban Heat Island (UHI), there is a need to accurately characterise the organisation of the city in terms of 3D geometry, spectral optical properties and both land surface temperature and emissivity (LST and LSE) at several scales. In this context, the CAMCATT-AI4GEO field campaign provides a set of airborne VISNIR-SWIR (Visible Near InfraRed - ShortWave InfraRed) hyperspectral imagery, multispectral thermal infrared (TIR) imagery and 3D LiDAR acquisitions, together with a variety of ground data collected, for some of them, simultaneously to the flight. The ground dataset includes surface reflectance measured spectrally with ASD spectroradiometers and in six spectral bands spreading from shortwave to thermal infrared and for two viewing angles with a SOC410-DHR handheld reflectometer. It is completed with LST and LSE retrieved from thermal infrared radiance acquired in six spectral bands with CIMEL radiometers. It also includes meteorological data coming from four radio soundings (one of which was taken during the flight), data routinely collected at the Blagnac airport reference station as well as air temperature and humidity acquired using instrumented cars following two different itineraries. In addition, a link is provided to access the data routinely collected by the network of weather stations set up by Toulouse Metropole in the city and its surroundings. This data paper describes this new reference urban dataset which can be useful for many applications such as calibration/validation of at-surface radiance, LST and LSE data products as well as higher level products such as air temperature or comfort index. It also provides valuable opportunities for other applications in urban climate studies, such as supporting the validation of microclimate models.