This paper presents an original approach to the structural design and analysis of a 3D-printed thermoplastic-core propeller blade for high-altitude UAVs. A macroscale linear isotropic numerical model for the behavior of 3D-printed parts (in Tough PLA, as well as ABS) is fed with values from tensile and bending testing on standard specimens (ISO 527-2/1A and ASTM D5023) before validation by experiments on a representative scaled substitute blade and blade root. The influence of printing parameters, such as material, layer thickness, and raster orientation, is also addressed, as well as variability between prints. To conclude on the validity of the present methodology for complex shapes, a validation of the numerical results with experiments was performed on a scaled 3D-printed twisted blade. The presented macroscale approach to 3D-printed materials was able to predict tensile and bending deformation with good accuracy compared to previously published micro- or meso-scale approaches since it is built from systematic tensile and bending testing on standard specimens to representative blade assemblies. It provides a reliable digital twin for the early design stages of 3D-printed propeller blades. As a proof-of-concept, the validated methodology was then used to design and numerically analyze a large-scale blade using steady one-way Fluid-Structure Interaction in take-off and cruise conditions. The computed stress levels in the blade structure were within safe margins, thereby proving the feasibility of the 3D printing of full-scale propeller blades for high-altitude platforms.
Previous work on multidisciplinary optimization of high-speed propeller blades led to the emergence of humpy blades with or without sweep. The present paper is intended to deliver more insight into the potential benefits of such blades by means of a comparative study of four blade designs. These designs differ only in their respective chord distribution and tip sweep. Comparisons are given in terms of aerodynamic and aeroacoustic performance for the four designs operating either in identical flow conditions, hence different load, or in identical thrust conditions, hence slightly different flow conditions due to adaptation of the blade angle. The results highlight the potential of humpy designs to reduce noise in cruise conditions with a small loss of efficiency.
1 February 2024 in The Journal of the Acoustical Society of America
Acoustic events exceeding a certain threshold of intensity cannot benefit from a linearization of the governing wave equation, posing an additional burden on the numerical modelling. Weak shock theory associates nonlinearity with the generation of high frequency harmonics that compensate for atmospheric attenuation. Overlooking the persistence of this phenomenon at large distances can lead to mispredictions in gun detection procedures, noise abatement protocols, and auditory risk assessment. The state-of-the-art mostly addresses aircraft jet noise, a stationary and largely random type of signal. The extension of such conclusions to muzzle blasts requires caution in considering their peculiar impulsive and broadband nature. A methodology based on the time and frequency analysis of an experimental dataset of eight calibres intends to find quantitative metrics linked to acoustic nonlinearity in outdoor muzzle blast propagation. Propagating three waveforms (SCAR-L 7.62 mm, Browning 9 mm, and Howitzer 105 mm) up to 300 [m] with the in-house numerical solver based on the nonlinear progressive wave equation, demonstrates that the propagation does not downgrade to truly linear.
Next to empirical correlations for the specific range, fuel flow rate, and specific fuel consumption, a response surface model for estimates of the fuel consumption in early design stages is presented and validated. The response-surface’s coefficients are themselves predicted from empirical correlations based solely on the operating empty weight. The model and correlations are all derived from fuel consumption data of nine current civil turbo-propeller aircraft and are validated on a separate set. The model can accurately predict fuel weights of new designs for any combination of payload and range within the current range of efficiency of the propulsion. The accuracy of the model makes it suited for preliminary and conceptual design of near-in-kind turbo-propeller aircraft. The model can shorten the design cycle by delivering fast and accurate fuel weight estimates from the first design iteration once the operating empty weight is known. Since it is based solely on the operating empty weight and it is accurate, the model is a sound variant to the Breguet range equation in order to make accurate fuel weight estimates.