Wideband planar monopole antennas with dual band-notched characteristics are presented. The proposed antenna consists of a wideband planar monopole antenna and the multiple cup-, cap-, and inverted L-shaped slots, producing band-notched characteristics. In order to generate dual band-notched characteristic, we propose nine types of planar monopole antennas, which have two or three cap (cup or inverted L)-shaped slots in the radiator. This technique is suitable for creating ultra-wideband antenna with narrow frequency notches or for creating multiband antennas

Due to the convenience of using electronic devices, contactless energy transfer (CET) systems have garnered interest in various fields of industry. In this paper, a new design approach that uses antiparallel resonant loops for CET systems is presented. Forward and reverse loops forming an antiparallel resonant structure stabilize the transfer efficiency and therefore prevent it from dramatic distance-related changes, a phenomenon that can occur in CET systems with nonradiative methods (or resonant methods). This paper proposes frequency-insensitive antiparallel resonant loops and the optimal design of these loops for uniform transfer efficiency according to the distance. The proposed technique achieves frequency variation that is one-sixth that of conventional unidirectional loops, thus improving the power efficiency to a maximum of 87%. The improved performance of data transmissions for near-field communication is also verified.

This paper discusses a new design approach that uses hybrid power combining rectenna array in radio frequency (RF) energy transfer systems to receive more energy in a wide incident angle range. A beam-forming matrix and a dc power management network (PMN) are introduced to the hybrid power combining. The normalized dc output power of the proposed hybrid power combining array is compared to the conventional power combining methods with regard to the incident wave angle, and the average received dc power is also calculated and compared. To experimentally verify the proposed hybrid combining array performance, four suspended patch antennas are attached to RF energy receiving architecture. A 4 × 4 Butler matrix and quadrature hybrids are used for the beam-forming matrix in a hybrid power combining rectenna array. A reconfigurable voltage doubler rectifier with a dc PMN is used to convert RF energy to dc energy and delivers proper voltage to the load. The measured results of each component are presented. Moreover, an experimental verification using fabricated components for RF energy transfer is presented and the measured received dc output power of conventional and proposed structures is presented and compared.

Due to the nonuniform energy distribution in a microwave (MW) cavity, MW-based heating applications remain a substantial barrier. A continuous power-controlled MW conveyor-belt drier using multiple 2.45-GHz MW sources improves heating uniformity. By controlling the input power of MW sources sequentially, the electric field and temperature variations, hot and cold spots in the MW cavity, have been significantly reduced. Experimental results show that the MW heating using the proposed continuous power-controlled method can achieve an improved heating uniformity of approximately 34% compared with a simultaneous multiple input method (conventional mode).

A multiple band-notched planar monopole antenna for multiband wireless systems is presented. The proposed antenna consists of a wideband planar monopole antenna and the multiple U-shape slots, producing band-notched characteristics. In order to generate two band-notched characteristics, we propose that three U-shape slots are required. This technique is suitable for creating ultra-wideband (UWB) antenna with narrow frequency notches or for creating multiband antennas.

For demonstrating autonomous operation of the Internet of things (IoT) smart sensors, the compact folded dipole rectenna with radio frequency (RF) energy harvesting is proposed. The rectifying circuits in the proposed rectenna consist of the impedance matching network and the voltage multiplier for the optimised received power. It has achieved the RF‐dc conversion efficiency of approximately 23% when illuminated by a radio signal of 1 mW available power from the commercial UHF RFID reader.