Hydraulic actuated quadruped robots have bright application prospects and significant research values in unmanned area investigation, disaster rescue and other scenarios, due to the advantages of high payload and high power to weight ratio. Among these fields, inevitable collision of robots may occur when contact with unknown objects, step on empty objects, or collapse, all of which have an impact on the working hydraulic system. To overcome the unknown external disturbances, this paper proposes an active disturbance rejection control (ADRC) strategy of double vane hydraulic rotary actuators for the hip joints of the quadruped robots. Considering the order of the valve-controlled actuator model, a three-stage tracking differentiator, a four-stage extended state observer, and a state error feedback controller are designed relatively, and the extended state observer is adopted to observe and compensate the uncertainty of external load torque of the system. The effectiveness of the ADRC method is verified in simulation environment and a single joint experimental platform. Moreover, the impact experiments of the limb leg unit are carried out after introducing the proposed ADRC strategy into hip joint, the limb leg unit of quadruped robots presents better impact resistance ability.
The technology for stepper drive that can achieve accurate motion in the hydraulic field has always been urgently needed in the industry. This paper proposes a hydraulic stepper drive based on five high speed on/off valves and two miniature plunger cylinders. The stepper drive discretizes the continuous flow medium into fixed small steps through the miniature plunger cylinder and realizes the state control of the drive through the logic action of the high speed on/off valve. This paper improves the current stepper drive and establishes a mathematical model to analyze the error of the drive and calculate the position of the actuator. In addition, through simulation research, the performance parameters such as the single-step step characteristic and pressure characteristic of the stepper drive are studied. The results show that, compared with the technology of current stepper drive, this stepper drive can effectively remove the “post step” phenomenon, greatly improve the stepper accuracy of the stepper drive, and have a more excellent performance.
Conducting dynamic exploration in complex and unpredictable environments, particularly in space exploration, reveals the great potential of systems based on tensegrity structures. However, the implementation of such systems faces a series of intelligent challenges, including the reliability of wireless monitoring, the efficiency of human-computer interaction, and the optimization of intelligent analysis and recommendation capabilities. In this study, we introduce a 6-bar tensegrity system equipped with 24 flexible sensors, leveraging fine-tuned multimodal large language model to enable autonomous state cognition system including self-shape recognition, alarm system, as well as fault diagnosis. Supported by long and short-term memory models, the tensegrity is able to reconstruct its own shape via conductive flexible tendons without relying on external sensors. By combining the flask server with the fine-tuned large language model, the tensegrity automatically transmits data to the iPhone for wireless monitoring. Finally, we developed the fine-tuned LLM and employed it to facilitate fault diagnosis and human interaction, enabling users to effectively obtain the requisite information through natural language processing techniques. This autonomous state cognition system relying on tensioning bars shows great potential for future exploration and becomes a powerful tool for multifunctional applications in the real world.
15 August 2024 in Chinese Journal of Mechanical Engineering
Cam-lobe radial-piston hydraulic motors are widely used as rotation driving units for various marine machinery owing to their ultrahigh output torque (more than 100 kN m). A multi-row cam roller bearing (MCRB) is the key component that directly determines the fatigue life of a cam-lobe radial-piston hydraulic motor. However, compact geometry and complex loads render MCRB susceptible to fatigue failure, highlighting the need for an optimized MCRB to achieve longer fatigue life and higher reliability. Therefore, this study proposes an innovative geometry optimization method for an MCRB to improve its fatigue life. In this method, a quasi-static model was developed to calculate the load distribution, with the fatigue life of the MCRB calculated using both basic dynamic loading and load distribution. Subsequently, a genetic algorithm was used to obtain the optimized geometry parameters, which significantly improved the fatigue life of the MCRB. Finally, a loading test was conducted on a hydraulic motor installed with both the initial and optimized MCRB to validate the effectiveness of the proposed optimization method. This study provides a theoretical guideline for optimizing the design of MCRB, thereby increasing the fatigue life of hydraulic motors.
9 September 2024 in Chinese Journal of Mechanical Engineering
High-end equipment always operate in low-speed and heavy-load working environments, highlighting the need for cam-lobe hydraulic motors with excellent speed stability (< 1 r/min) and ultrahigh-power rotary output (> 1 MW). The successful operation of cam-lobe hydraulic motors relies on the circulation supply of high- and low-pressure oil. However, the switching between high-/low-pressure oil controlled by the oil distributor inevitably causes an obvious pressure impact and speed pulsation, which directly reduces the speed stability of hydraulic motors. Therefore, an optimization design approach for the oil distributor port is proposed to minimize the speed pulsation of cam-lobe hydraulic motors. In the proposed approach, a simulation model that links the oil distributor port structural parameters with the hydraulic motor speed pulsation was developed to clarify the effect of the oil distributor structural parameters on speed pulsation. Then, an orthogonal analysis method was used to identify the optimized oil distributor port structural parameters while minimizing the hydraulic motor’s speed pulsation as much as possible. Finally, several experiments were conducted to validate the effectiveness and accuracy of the proposed optimization design approach. The experimental results indicate that the pulsation rate of the hydraulic motor equipped with the optimized oil distributor was 62.5% lower than that of the original motor at a working pressure of 25 MPa, which is consistent with the simulation results using the proposed optimization design approach. The findings of this study offer a feasible and effective approach to guide the design optimization of the oil distributor port for low-pulsation hydraulic motors.