Effective lithium-ion battery module modeling has become a bottleneck for full-size electric vehicle crash safety numerical simulation. Modeling every single cell in detail would be costly. However, computational accuracy could be lost if the module is modeled by using a simple bulk material or rigid body. To solve this critical engineering problem, a general method to establish a computational homogenized model for the cylindrical battery module is proposed. A single battery cell model is developed and validated through radial compression and bending experiments. To analyze the homogenized mechanical properties of the module, a representative unit cell (RUC) is extracted with the periodic boundary condition applied on it. An elastic–plastic constitutive model is established to describe the computational homogenized model for the module. Two typical packing modes, i.e., cubic dense packing and hexagonal packing for the homogenized equivalent battery module (EBM) model, are targeted for validation compression tests, as well as the models with detailed single cell description. Further, the homogenized EBM model is confirmed to agree reasonably well with the detailed battery module (DBM) model for different packing modes with a length scale of up to 15 × 15 cells and 12% deformation where the short circuit takes place. The suggested homogenized model for battery module makes way for battery module and pack safety evaluation for full-size electric vehicle crashworthiness analysis.
Recent field data showed that lumbar spine fractures occurred more frequently in late model vehicles than early ones in frontal crashes. However, the lumbar spine designs of the current crash test dummies are not accurate in human anatomy and have not been validated against any human/cadaver impact responses. In addition, the lumbar spines of finite element (FE) human models, including GHBMC and THUMS, have never been validated previously against cadaver tests. Therefore, this study developed a detailed FE lumbar spine model and validated it against cadaveric tests. To investigate the mechanism of lumbar spine injury in frontal crashes, effects of changing the coefficient of friction (COF), impact velocity, cushion thickness and stiffness, and cushion angle on the risk of lumbar spine injuries were analyzed based on a Taguchi array of design of experiments. The results showed that impact velocity is the most important factor in determining the risk of lumbar spine fracture (). After controlling the impact velocity, increases in the cushion thickness can effectively reduce the risk of lumbar spine fracture ().
1 August 2012 in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
The forces and/or moments applied to a ball joint and a bushing in one suspension are important loads for the design or fatigue tests of control arms, trailing bars and steering knuckles. Taking a double wishbone suspension as one studying example, a modeling and calculation method for obtaining the forces applied to the ball joints and the bushings, and moments applied to the bushings are proposed and developed in this article. In modeling of a suspension, a bushing is modeled with three translational stiffness and three torsional stiffness along and around three orthogonal axes. The force (moment) versus displacement (angle) along (around) one axis is nonlinear and is simplified as piecewise linear at five sections. The joint forces and moments for ball joints and bushings of a double wishbone suspension system are calculated with the proposed method in this article, and compared with that obtained using two conventional methods (method I and method II) when a vehicle runs in typical and extreme driving conditions. Conventional method I simplifies the connections between the control arm and body as rigid link. Conventional method II assumes that the control arm links with the body using bushings, in which the bushings are modeled as three linear stiffness along three orthogonal axes. The calculation and comparison demonstrate that the bushing nonlinear and rotational stiffness must be modeled for precise calculation of ball joint force and moments, especially when a vehicle runs in extreme driving conditions.
9 November 2020 in International Journal of Energy Research