In situ measurements of sagebrush have traditionally been expensive and time consuming. Currently, improvements in small Unmanned Aerial Systems (sUAS) technology can be used to quantify sagebrush morphology and community structure with high resolution imagery on western rangelands, especially in sensitive habitat of the Greater sage-grouse (Centrocercus urophasianus). The emergence of photogrammetry algorithms to generate 3D point clouds from true color imagery can potentially increase the efficiency and accuracy of measuring shrub height in sage-grouse habitat. Our objective was to determine optimal parameters for measuring sagebrush height including flight altitude, single- vs. double- pass, and continuous vs. pause features. We acquired imagery using a DJI Mavic Pro 2 multi-rotor Unmanned Aerial Vehicle (UAV) equipped with an RGB camera, flown at 30.5, 45, 75, and 120 m and implementing single-pass and double-pass methods, using continuous flight and paused flight for each photo method. We generated a Digital Surface Model (DSM) from which we derived plant height, and then performed an accuracy assessment using on the ground measurements taken at the time of flight. We found high correlation between field measured heights and estimated heights, with a mean difference of approximately 10 cm (SE = 0.4 cm) and little variability in accuracy between flights with different heights and other parameters after statistical correction using linear regression. We conclude that higher altitude flights using a single-pass method are optimal to measure sagebrush height due to lower requirements in data storage and processing time.

Encroachment of pinyon (Pinus spp) and juniper (Juniperus spp.) woodlands in western North America is considered detrimental due to its effects on ecohydrology, plant community structure, and soil stability. Management plans at the federal, state, and private level often include juniper removal for improving habitat of sensitive species and maintaining sustainable ecosystem processes. Remote sensing has become a useful tool in determining changes in juniper woodland structure because of its uses in comparing archived historic imagery with newly available multispectral images to provide information on changes that are no longer detectable by field measurements. Change in western juniper (J. occidentalis) cover was detected following juniper removal treatments between 1995 and 2011 using panchromatic 1-meter NAIP and 4-band 1-meter NAIP imagery, respectively. Image classification was conducted using remotely sensed images taken at the Roaring Springs Ranch in southeastern Oregon. Feature Analyst for ArcGIS (object-based extraction) and a supervised classification with ENVI 5.2 (pixel-based extraction) were used to delineate juniper canopy cover. Image classification accuracy was calculated using an Accuracy Assessment and Kappa Statistic. Both methods showed approximately a 76% decrease in western juniper cover, although differing in total canopy cover area, with object-based classification being more accurate. Classification results for the 2011 imagery were much more accurate (0.99 Kappa statistic) because of its low juniper density and the presence of an infrared band. The development of methods for detecting change in juniper cover can lead to more accurate and efficient data acquisition and subsequently improved land management and monitoring practices. These data can subsequently be used to assess and quantify juniper invasion and succession, potential ecological impacts, and plant community resilience.

Turning over a new leaf: the Aspen Spatial Bibliography enhances research - Author: Anne Hedrich, Andrea Payant, Liz Woolcott, Steven Petersen, Ryan Howell, Paul C. Rogers