Various defects produced during the manufacture of a wind turbine blade can affect the damage evolution under fatigue loads. In this paper, a calculation model based on energy dissipation was used to predict damage evolution. Based on the structure of the unidirectional laminates in the main spar of a 1.5-MW blade, specimens with voids or delamination defects of different dimensions were fabricated. Fatigue tests of the specimens were monitored with an infrared thermography system. The energy dissipation density was calculated from the surface temperature. A damage parameter D is proposed to represent the degree of damage evolution. By analyzing the energy dissipated during cyclic loading, it is possible to evaluate the critical moment when a defect evolves into initial critical damage. The calculation model agrees well with the observed damage evolution. This innovative method could be used to detect the initial damage in a main spar with defects during a fatigue test.
7 July 2021 in Fatigue & Fracture of Engineering Materials & Structures
As manufacturing defects, voids in wind turbine blades may cause damage under fatigue loads. In this paper, the internal energy storage is used as an indicator to identify the critical moment when a defect evolves into damage. The heat transfer equation of composites material containing void defects is derived based upon the theory of the thermodynamics of irreversible processes. In order to obtain the numerical calculation model of the internal energy storage of the evolving process, the thermal conductivity along the transverse direction is homogenized as the temperature date along this direction is acquired by a thermal camera. Specimens with different void fractions are tested with infrared thermal imaging under fatigue load, during which the stress, strain and temperature data are acquired to establish the curve of internal energy storage against the fatigue cycle. This relationship curve can be used to identify the critical moment when void defects evolve into damage. The feasibility of this method is proven by microscopic observation.