A few-layer graphene nano-flake thin film was prepared by an affordable vacuum kinetic spray method at room temperature and modest low vacuum conditions. In this economical approach, graphite microparticles, a few layers thick, are deposited on a stainless-steel substrate to form few-layer graphene nano-flakes using a nanoparticle deposition system (NPDS). The NPDS allows for a large area deposition at a low cost and can deposit various metal oxides at room temperature and low vacuum conditions. The morphology and structure of the deposited thin films are alterable by changing the scan speed of the deposition. These changes were verified by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. The electrochemical performances of the supercapacitors, fabricated using the deposited films and H3PO4–PVA gel electrolytes with different concentrations, were measured using a 2-electrode cell. The electrochemical performance was evaluated by cyclic voltammetry, galvanostatic Charge–discharge, and electrochemical impedance spectroscopy. The proposed affordable fabricated supercapacitors show a high areal capacitance and a small equivalent series resistance.
21 February 2023 in Journal of Materials Science: Materials in Electronics
NiCo2O4 Nanoparticles have been synthesized by a facile hydrothermal method followed by annealing at a temperature decided based on differential thermal (DTA). Different additives and surfactants were used in preparation under the same synthesis conditions and their effects on the physical properties of spinel nickel cobaltite nanoparticles have been investigated in a fair comparison study. The synthesis products have been characterized by using DTA and TGA measurements, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. Modification on the synthesis of the spinel nanoparticles provided high specific capacitance of 2253 F g−1 at 1 A g−1 and long-term cyclic stability for 10,000 cycles with 90% capacitance retention.
28 May 2019 in Journal of Thermal Spray Technology