Increasing attention has been given to energy utilization in Turkey. In this report, we present an energy efficiency evaluation and economic feasibility analysis of a geothermal heating and cooling system (GSHP) and a mechanical compression water chiller system (ACHP) to improve the energy utilization efficiency and reduce the primary energy demand for industrial use. Analyses of a mechanical water chiller unit, GSW 180, and geothermal heating and cooling system, EAR 431 SK, were conducted in experimental working areas of the office buildings in a cigarette factory in Mersin, Turkey. The heating and cooling loads of the cigarette factory building were calculated, and actual thermal data were collected and analyzed. To calculate these loads, the cooling load temperature difference method was used. It was concluded that the geothermal heating and cooling system was more useful and productive and provides substantial economic benefits.
Energy efficiency in heating, ventilating, and air-conditioning (HVAC) systems is a primary concern in process projects, since the energy consumption has the highest percentage in HVAC for all processes. Without sacrifice of thermal comfort, to reset the suitable operating parameters, such as the humidity and air temperature, would have energy saving with immediate effect. In this paper, the simulation-optimization approach described the effective energy efficiency for HVAC systems which are used in industrial process. Due to the complex relationship of the HVAC system parameters, it is necessary to suggest optimum settings for different operations in response to the dynamic cooling loads and changing weather conditions during a year. Proportional-integral-derivative (PID) programming was developed which can effectively handle the discrete, nonlinear and highly constrained optimization problems. Energy efficiency process has been made by controlling of alternative current (AC) drivers for ventilation and exhaust fans, according to supplied air flow capacity and differential air pressure between supplied and exhaust air. Supervisory controller software was developed by using programmable controllers and human machine interface (HMI) units. The new designed HVAC control system would have a saving potential of about 40% as compared to the existing operational settings, without any extra cost.
19 November 2022 in International Journal of Engineering Science Technologies
Many vehicle manufacturers have started up the development and production of electric vehicles reducing in response to climate change, increasing air pollution and exhaust emission problems. In addition, the most important of the difficult problems associated with electric vehicles is the high cost caused by the use of a large number of batteries and the use of a limited number of batteries negatively affects the driving distance of the car. The limitations caused by the battery problems are not only to increase the cost but also increase vehicle load because it takes up too much space and limits the usage area of the vehicle. In order to address these problems, electric vehicle manufacturers have tried to find a way to reduce the weight of the vehicle body. Therefore, to reduce weight, it would be more accurate to use light metal alloys that could get better results than using polymer composites in this study 6063 series aluminum alloy box and tube profiles were used as chassis materials, and birdcage chassis production was carried out by combining these profiles with MIG welding. After production is completed, the steering system, brake system, suspension system and other moving parts are installed on the chassis. As a result, the final weight of the vehicle was 210 kg and the negativity that may occur was prevented.
9 September 2016 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Bu çalışmada, aynı boyutta kesilen kabak ve patlıcan dilimlerinin kuruma davranışları deneysel olarak incelenmiştir. Deneyler üç farklı hız (0.5, 1.0 ve 1.5 m/s) ve üç farklı sıcaklıkta (40, 50, ve 60 °C) konvektif bir kurutucuda yapılmıştır. Elde edilen kuruma eğrileri, literatürde yaygın olarak kullanılan modellerden Lewis, Henderson-Pabis ve iki terimli eksponansiyel modllerine yerleştirilmiştir. Kabak ve patlıcan dilimlerinin kuruma karakteristiklerini tanımlamada iki-terimli eksponansiyel ve Henderson-Pabis modellerinin uygun olduğu belirlenmiştir. Ayrıca difüzyon Deff ve kütle taşınım hm katsayılarının kurutma havası sıcaklığı ve hızıyla değişimleri incelenmiştir. Artan hız ve sıcaklıkla kütle transfer parametrelerinin arttığı ve kuruma süresinin azaldığı tespit edilmiştir.
24 December 2015 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Bu çalışmada, güneş enerjisi destekli tek etkili Su-Lityum Bromür (H2O-LiBr) karışımı kullanan absorpsiyonlu soğutma makinası kullanılarak Kahramanmaraş kentinde inşa edilmiş bir apartman dairesinin soğutulması sağlanmıştır. Çalışmada, TS 825 standartları ve Kahramanmaraş kentinin yaz hava koşulları göz önüne alınmıştır. Odalarda istenilen sabit iç ortam sıcaklığını korumak için hesaplanan soğutma enerjisi ihtiyacı, absorpsiyonlu soğutma sisteminin kolektörleri vasıtasıyla güneş enerjisinden karşılanmıştır. Hesaplamalarda Engineering Equation Solver (EES) ve Matrix Laboratory (MATLAB) programları kullanılmıştır. Apartman dairesinin soğutma enerjisi talebine göre farklı tip kolektörler (düz plakalı ve vakum tüplü kollektör) göz önüne alınarak gerekli olan kolektör yüzey alanı hesaplanmıştır.
9 September 2016 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi