Microwave remote sensing technology has been applied to produce soil moisture (SM) retrievals on a global scale for various studies and applications. However, due to the limitations of current technology, the native spatial resolution of currently available passive microwave SM products is on the order of tens of kilometers, and this resolution cannot be used to characterize SM variability on a regional scale. To overcome this limitation, a downscaling algorithm based on the thermal inertia theory–derived relationship between SM and temperature difference was developed using outputs from the Global Land Data Assimilation System–Noah Land Surface Model and the land long‐term data record–Advanced Very High Resolution Radiometer normalized difference vegetation index (NDVI) dataset and applied to the Aqua Moderate Resolution Imaging Spectroradiometer land surface temperature/NDVI data to produce a downscaled 1‐km Soil Moisture Active Passive (SMAP) radiometer daily SM product, respectively, at 6:00 a.m. and 6:00 p.m. on a global scale from 2015 to 2020. The evaluation results reveal that the downscaling model performs better in the middle or low latitudes than in high latitudes. It also performs better in warm months than in cold months. The in situ SM observations from dense networks around the world were used to validate the 1‐km and enhanced 9‐km SMAP SM data. The validation metrics indicated that both the 1‐km and 9‐km SM data have overall overestimation trends, and the unbiased RMSE (0.063 m ³ m ^–3 on average), mean absolute error (0.052 m ³ m ^–3 on average), and spatial standard deviation (0.025 m ³ m ^–3 on average) of the 1 km data are generally more accurate than the metrics of the 9‐km SM data, which indicates that the downscaled data provide reliable observed SM information.

Satellite remote sensing has been providing passive microwave soil moisture (SM) retrievals of a global spatial coverage and a high revisit frequency for research and applications in earth and environmental sciences, specifically after the soil moisture active and passive (SMAP) was launched in 2015. But, the spatial resolution of SM data is restricted to tens of kilometers, which is insufficient for regional or watershed scale studies. In this article, an SM downscaling algorithm was developed based on the vegetation modulated apparent thermal inertia relationship between SM and changes in land surface temperature (LST). The algorithm used data sets from the North America Land Data Assimilation System Noah model outputs and the advanced very high resolution radiometer data of the long term data record from 1981 to 2018. Here, the downscaling model was applied to visible/infred LST data from the visible infrared imaging radiometer suite at 400-m and the moderate resolution imaging spectroradiometer at 1 km to downscale the L2 radiometer half-orbit 9 km SMAP SM from 2018 to 2019 for the contiguous United States. The 400-m/1-km downscaled SM products were validated using 125 in situ SM ground measurements acquired from the International Soil Moisture Network. The validation results summarized by SM network show that the overall unbiased RMSE for 400-m of the improved/original downscaling algorithms and 1-km SM outperform 9-km SM by 0.01, 0.007, and 0.012 m ³ /m ³ volumetric soil moisture, respectively, which indicates a fairly good performance of the downscaling algorithm. It is also found that precipitation has an impact on the 9-km SMAP SM.

A soil moisture (SM) disaggregation algorithm based on thermal inertia (TI) theory was implemented to downscale the soil moisture active passive (SMAP) enhanced product (SPL2SMP$\_$E) from 9 to 1 km over the continental United States. The algorithm applies land surface temperature and normalized difference vegetation index from moderate resolution imaging spectroradiometer (MODIS) at higher spatial resolution to estimate relative soil wetness within a coarse SMAP grid-this MODIS-derived relative wetness is then used to produce the downscaled SMAP SM. Results from the algorithm were evaluated in terms of their spatio-temporal coverage and accuracy using in situ measurements from SMAP core validation sites (CVS), the U.S. Department of Agriculture Soil Climate Analysis Network (SCAN), and the National Oceanic and Atmospheric Administration Climate Reference Network (CRN). Results were also compared with the baseline SPL2SMP$\_$E and the SMAP/Sentinel-1 (SPL2SMAP$\_$S) 1 km product. Overall, the unbiased root-mean-square error (ubRMSE) of the disaggregated SM at the CVS using the TI approach is approximately 0.04 $\text{m}^3/\text{m}^3$, which is the SMAP mission requirement for the baseline products. The TI approach outperforms the SMAP/Sentinel SL2SMAP$\_$S 1 km product by approximately 0.02 $\text{m}^3/\text{m}^3$. Over the agriculture/crop areas from SCAN and CRN sparse network stations, the TI approach exhibits better ubRMSE compared to SPL2SMP$\_$E and SPL2SMAP$\_$S by about 0.01 and 0.02 $\text{m}^3/\text{m}^3$, indicating its advantage in these areas. However, a drawback of this approach is that there are data gaps due to cloud cover as optical sensors cannot have a clear view of the land surface.

In large river basins where in situ data were limited or absent, satellite-based soil moisture estimates can be used to supplement ground measurements for land and water resource management solutions. Consistent soil moisture estimation can aid in monitoring droughts, forecasting floods, monitoring crop productivity, and assisting weather forecasting. Satellite-based soil moisture estimates are readily available at the global scale but are provided at spatial scales that are relatively coarse for many hydrological modeling and decision-making purposes. Soil moisture data are obtained from NASA’s soil moisture active passive (SMAP) mission radiometer as an interpolated product at 9 km gridded resolution. This study implements a soil moisture downscaling algorithm that was developed based on the relationship between daily temperature change and average soil moisture under varying vegetation conditions. It applies a look-up table using global land data assimilation system (GLDAS) soil moisture and surface temperature data, and advanced very high resolution radiometer (AVHRR) and moderate resolution imaging spectroradiometer (MODIS) normalized difference vegetation index (NDVI) and land surface temperature (LST). MODIS LST and NDVI are used to obtain downscaled soil moisture estimates. These estimates are then used to enhance the spatial resolution of soil moisture estimates from SMAP 9 km to 1 km. Soil moisture estimates at 1 km resolution are able to provide detailed information on the spatial distribution and pattern over the regions being analyzed. Higher resolution soil moisture data are needed for practical applications and modelling in large watersheds with limited in situ data, like in the Lower Mekong River Basin (LMB) in Southeast Asia. The 1 km soil moisture estimates can be applied directly to improve flood prediction and assessment as well as drought monitoring and agricultural productivity predictions for large river basins.

A thermal hydraulic disaggregation of soil moisture (THySM) algorithm was implemented to downscale NASA's soil moisture active passive (SMAP) enhanced soil moisture (SM) product to 1 km over the continental United States (CONUS). This algorithm was developed by combining thermal inertia theory with a soil hydraulic-based approach that considers fine-scale SM spatial distribution driven by both heat fluxes and hydraulic conductivity in soils. Relative soil wetness values were estimated using land surface temperature and normalized difference vegetation index for the thermal inertia model and using soil properties for the hydraulic model. The relative soil wetness values at 1 km from both models were then combined by using weighting functions whereby the spatial distribution of SM was governed more by thermal fluxes during times of strong heat transport and infiltration during moisture abundant soil conditions. THySM values were evaluated using in situ SM measurements from SMAP Core Validation Sites (CVS), the US Department of Agriculture Soil Climate Analysis Network, and the National Oceanic and Atmospheric Administration Climate Reference Network over CONUS. THySM shows higher accuracy than the SMAP / Sentinel-1 (SPL2SMAP_S) 1 km SM product when compared to in situ measurements. The accuracy of THySM is 0.048 m ³ /m ³ based on unbiased root mean square error (ubRMSE), outperforming SPL2SMAP_S by 0.01–0.02 m ³ /m ³ . The ubRMSE of THySM 1 km SM over the SMAP grassland/rangeland-dominated CVS sites is better than 0.04 m ³ /m ³ , which meets the SMAP mission SM accuracy requirement applied at 9 and 36 km.