Reservoir impoundment imposes a significant triggering effect on bank landslides. Studying the early identification of landslides and their stability concerning reservoir water levels and rainfall is vital for guaranteeing the safety of residents and infrastructure in reservoir regions. This study proposed a method for establishing a dynamic inventory of active landslides at large hydropower stations using integrated remote sensing techniques, demonstrated at Lianghekou Reservoir. We employed interferometric stacking synthetic aperture radar (stacking-InSAR) technology, small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technology, and optical satellite images to identify and catalogue active landslides. Moreover, we conducted field investigations to examine the deformation characteristics of landslides. Finally, Pearson’s correlation analysis was employed to evaluate the response between deformation values, reservoir water levels, and rainfall. The results revealed 75 active landslides, including 12 long-term active landslides before impoundment and 63 new landslides after impoundment, which were primarily concentrated in the Waduo and Yazho–Zatou regions. The correlation coefficient between landslide deformation values and the reservoir level was high (0.93), while the correlation coefficient with rainfall was low (0.57). The results of this research offer a crucial foundation for preventing and mitigating landslides in reservoir areas.

Ductile flexural toppling failure is a common form of toppling failure, and it is the product of long-term geological history and shows the characteristics of long-term deformation and progressive failure. The creep characteristics of rock mass have been seldom considered in the current research on toppling, especially interlayer creep of rock layers in the process of toppling. Based on the thought of deformation stability analysis, the flexural toppling failure was divided into the following four stages: start-up, rapid deformation, transient stability, and long-term creep stages. Combined with mechanical analysis, the developmental conditions of the start-up, transient stability, and long-term creep development stages are discussed respectively. Finally, several cases were selected to analyze the stage and the stability of the toppling deformation body, as well as to verify the rationality of the mechanical analysis condition. Study results show that the start-up conditions meet Equation 2, the rock layer inclination and slope angle is 0.5π−φ in the transient stability stage, and that angle is the infinite 0.5π in the long-term creep stage. Other external forces (such as water pressure) will intensify the development of ductile flexural toppling failure, so that the angle between the toppled bedding surface and the slope surface increases. It is of great significance to analyze the development stage of the ductile flexural toppling, comprehensively analyze and evaluate the stability of the ductile flexural toppling, reasonably develop and utilize its self-stability ability, and set up support measures.