Digital avionic solutions enable advanced flight control systems to be available also on smaller aircraft. One of the safety-critical segments is the air data system. Innovative architectures allow the use of synthetic sensors that can introduce significant technological and safety advances. The application to aerodynamic angles seems the most promising towards certified applications. In this area, the best procedures concerning the design of synthetic sensors are still an open question within the field. An example is given by the MIDAS project funded in the frame of Clean Sky 2. This paper proposes two data-driven methods that allow to improve performance over the entire flight envelope with particular attention to steady state flight conditions. The training set obtained is considerably undersized with consequent reduction of computational costs. These methods are validated with a real case and they will be used as part of the MIDAS life cycle. The first method, called Data-Driven Identification and Generation of Quasi-Steady States (DIGS), is based on the (i) identification of the lift curve of the aircraft; (ii) augmentation of the training set with artificial flight data points. DIGS’s main aim is to reduce the issue of unbalanced training set. The second method, called Similar Flight Test Data Pruning (SFDP), deals with data reduction based on the isolation of quasi-unique points. Results give an evidence of the validity of the methods for the MIDAS project that can be easily adopted for generic synthetic sensor design for flight control system applications.
Heterogeneity of the small aircraft category (e.g., small air transport (SAT), urban air mobility (UAM), unmanned aircraft system (UAS)), modern avionic solution (e.g., fly-by-wire (FBW)) and reduced aircraft (A/C) size require more compact, integrated, digital and modular air data system (ADS) able to measure data from the external environment. The MIDAS project, funded in the frame of the Clean Sky 2 program, aims to satisfy those recent requirements with an ADS certified for commercial applications. The main pillar lays on a smart fusion between COTS solutions and analytical sensors (patented technology) for the identification of the aerodynamic angles. The identification involves both flight dynamic relationships and data-driven state observer(s) based on neural techniques, which are deterministic once the training is completed. As this project will bring analytical sensors on board of civil aircraft as part of a redundant system for the very first time, design activities documented in this work have a particular focus on airworthiness certification aspects. At this maturity level, simulated data are used, real flight test data will be used in the next stages. Data collection is described both for the training and test aspects. Training maneuvers are defined aiming to excite all dynamic modes, whereas test maneuvers are collected aiming to validate results independently from the training set and all autopilot configurations. Results demonstrate that an alternate solution is possible enabling significant savings in terms of computational effort and lines of codes but they show, at the same time, that a better training strategy may be beneficial to cope with the new neural network architecture.
Unmanned Aerial Vehicles (UAV) design may involve issues on redundancy of the systems due to restricted available space and allowable weight. Virtual sensors offer great advantages from this point of view and several research projects carry out more or less complicated solutions in order to estimate a signal without applying a physical sensor. This approach brings to a reduction of the overall cost and to improve the Reliability, Availability, Maintainability and Safety (RAMS) performance. The patented technology named Smart-ADAHRS (Smart — Attitude and Heading Reference System) is a powerful technique presented during previous research for estimation of the aerodynamic angles. This algorithm is based on Artificial Neural Network (ANN) and receive inputs from on-board sensors only. Whereas previous studies considered also the signals coming from the Flight Control System (FCS), this work presents the important simplification of not considering them in the input vector. This paper resumes the previous results obtained in simulated environment with former neural network-based estimators. Then, a comparison of the results obtained by the new estimator, applying the reduced input vector in different environments, is carried out. Moreover, it re-discusses accuracy by means of a new test case that consider simulated realistic faults and noise. Eventually, a first analysis around performance in operative environment is conducted using data obtained from flight test campaigns. Results show how accuracy is preserved both in realistic situation and critical circumstances.