Over the last decade, membrane-based CO₂ capture using ionic liquids (ILs) has been demonstrated as a promising technology. However, elaborative synthesis of monomers and long-term instability of IL-based composite membranes have so far limited their industrial relevance. In this paper, novel membranes are introduced for CO₂ separation using poly(ionic liquids) (PILs) based on polyvinylbenzyl chloride (PVBC). Three PIL-based membranes were prepared as thin-film composites (TFC) by solvent casting with subsequent sealing. They were tested for the CO₂ removal from synthetic flue gas. An ammonium-derivatised PVBC-analogue was prepared as a first PIL-type by polymerisation of an IL monomer, whereas two other PILs, respectively with hydroxyethyl ammonium and pyrrolidinium cations, were obtained using a modification of commercial PVBC. Introduction of bis(trifluoromethylsulfonyl)imide (Tf₂N) anions was accomplished by metathesis. A thorough characterisation of the material structure, composition, membrane morphology and gas separation properties demonstrates that the presence of hydroxyl groups in the polycation enhanced the interaction with CO₂ molecules. The mixed-gas selectivity increases with the higher positive charge on the cation species (hydroxyethyl-dimethylammonium > trimethylammonium > pyrrolidinium). More importantly, experiments performed in humidified conditions particularly revealed a doubled CO₂ permeance and a 20–30% increased selectivity in comparison to dry conditions. These developments are spurring the application of PIL-based TFC membranes for CO₂ capture from flue gas streams.

Fabrication of tailor-made materials requires meticulous planning, use of technical equipments, major components and suitable additives that influence the end application. Most of the processes of separation/transport/adsorption have environmental applications that demands a material to be with measurable porous nature, stability (mechanical, thermal) and morphology. Researchers say that a vital role is played by porogens in this regard. Porogens (i.e., synthetic, natural, mixed) and their qualitative and quantitative influence on the substrate material (polymers (bio, synthetic), ceramic, metals, etc.) and their fabrication processes are summarized. In most cases, porogens critically influence the morphology, performance, surface and cross-section, which are directly linked to material efficiency, stability, reusability potential and its applications. However, currently there are no review articles exclusively focused on the porogen pores’ role in material fabrication in general. Accordingly, this article comprises a review of the literature on various types of porogens, their efficiency in different host materials (organic, inorganic, etc.), pore size distribution (macro, micro and nano), their advantages and limitations, to a certain extent, and their critical applications. These include separation, transport of pollutants, stability improvement and much more. The progress made and the remaining challenges in porogens’ role in the material fabrication process need to be summarized for researcher’s attention.