Fluid filled fiber reinforced elastomeric enclosures (FREEs) have been a popular choice for actuators in prosthetics and soft robots owing to their high power density and cost effective manufacturing. While a narrow class of FREEs known as McKibben's actuators have been extensively studied, there is a wide unexplored class that could be potentially used as actuators and soft structural members. This paper analyzes the mobility of generalized FREEs based on simple geometric relationships that result from the inextensibility of fibers and fluidic actuation. The analysis conducted can be classified into instantaneous kinematics and global or large deformation kinematics. Instantaneous kinematics reveals that the most general deformation pattern of the FREE is a screw motion about the axis of its cylinder, whose pitch is a function of fiber orientations. Furthermore, a set of fiber angles, which do not deform under volumetric actuation were identified as the locked manifold (LM). Global kinematic analysis revealed that every FREE continued to deform until its fiber configuration approached the LM. These insights were corroborated with finite element analysis (FEA) and testing for a small sample of FREE actuators.
The shortage of qualified human labor is a key challenge facing farmers, limiting profit margins and preventing the adoption of sustainable and diversified agroecosystems, such as agroforestry. New technologies in robotics could offer a solution to such limitations. Advances in soft arms and manipulators can enable agricultural robots that can have better reach and dexterity around plants than traditional robots equipped with hard industrial robotic arms. Soft robotic arms and manipulators can be far less expensive to manufacture and significantly lighter than their hard counterparts. Furthermore, they can be simpler to design and manufacture since they rely on fluidic pressurization as the primary mechanisms of operation. However, current soft robotic arms are difficult to design and control, slow to actuate, and have limited payloads. In this paper, we discuss the benefits and challenges of soft robotics technology and what it could mean for sustainable agriculture and agroforestry.
Fiber-reinforced soft pneumatic actuators can generate a wide variety of deformation behavior, making them popular in the field of soft robotics. Designing an actuator to meet a specified deformed shape is an important step toward the design of soft robots. We present a two-step methodology to design an actuator that matches a given planar curve on pressurization. In the first step, the curve is divided into a series of constant curvature (CC) segments that best approximate its shape. The second step involves designing a bending actuator by determining its fiber orientations for each CC segment. Further, this two-step method is extended to match two curves: a final deformed curve and an intermediate curve at a lower actuation pressure. On combining all the CC segments, the resulting actuator lies along a straight line unpressurized, and on pressurization deforms to trace the desired final curve through a preset intermediate curve. To demonstrate the method, we show different examples: an omega curve for an inchworm robot, an acronym SoRo for the Soft Robotics Journal, and a two-stage bending actuator.
Fiber reinforced elastomeric enclosures (FREEs) are soft and smart pneumatic actuators that deform in a predetermined fashion upon inflation. This paper analyzes the deformation behavior of FREEs by formulating a simple calculus of variations problem that involves constrained maximization of the enclosed volume. The model accurately captures the deformed shape for FREEs with any general fiber angle orientation, and its relation with actuation pressure, material properties and applied load. First, the accuracy of the model is verified with existing literature and experiments for the popular McKibben pneumatic artificial muscle actuator with two equal and opposite families of helically wrapped fibers. Then, the model is used to predict and experimentally validate the deformation behavior of novel rotating-contracting FREEs, for which no prior literature exist. The generality of the model enables conceptualization of novel FREEs whose fiber orientations vary arbitrarily along the geometry. Furthermore, the model is deemed to be useful in the design synthesis of fiber reinforced elastomeric actuators for general axisymmetric desired motion and output force requirement.
1 February 2015 in Journal of Mechanisms and Robotics
In this paper, we introduce a new type of spatial parallel robot that is comprised of soft inflatable constraints called trichamber actuators (TCAs). We extend the principles of the freedom and constraint topologies (FACT) synthesis approach to enable the synthesis and analysis of this new type of soft robot. The concepts of passive and active freedom spaces are introduced and applied to the design of general parallel systems that consist of active constraints (i.e., constraint that can be actuated to impart various loads onto the system's stage) that both drive desired motions and guide the system's desired degrees of freedom (DOFs). We provide the fabrication details of the TCA constraints introduced in this paper and experimentally determine their appropriate FACT-based constraint model. We fabricate a soft parallel robot that consists of three TCA constraints and verify and validate its FACT-predicted performance using finite element analysis (FEA) and experimental data. Other such soft robots are synthesized using FACT as case studies.
28 July 2022 in IEEE Robotics and Automation Letters
Soft continuum arms (SCAs) that are controlled by visual servoing (VS) present trade-offs between the camera range and tracking accuracy. Cameras placed at a distance (eye-to-hand) can observe a larger workspace area and the SCA tip, while a camera at the end effector (eye-in-hand) can more accurately survey the target. In this letter, we present a hybrid eye-to-hand and eye-in-hand VS scheme to track a desired object in the SCA's worksapce. When the target is not in the field-of-view of the tip camera, hand-to-eye VS is implemented using a wide field-of-view camera on the soft robot's base, to servo the soft robot's tip to a feasible region where the target is expected to be seen by the tip camera. This region is estimated by solving an optimization problem that finds the best region to place the SCA assuming a constant curvature model for the SCA. When the target is seen by the tip camera, the system switches to a hand-in-eye controller that keeps the target in the desired image position of the tip camera. Experimental results on the popular $BR^{2}$ SCA demonstrates the effectiveness of the hybrid VS scheme under practical settings that include external disturbances.