Hafnium oxide–based ferroelectric materials are promising candidates for next-generation nanoscale devices because of their ability to integrate into silicon electronics. However, the intrinsic high coercive field of the fluorite-structure oxide ferroelectric devices leads to incompatible operating voltage and limited endurance performance. We discovered a complementary metal-oxide semiconductor (CMOS)–compatible rhombohedral ferroelectric Hf(Zr) 1+x O 2 material rich in hafnium-zirconium [Hf(Zr)]. X-ray diffraction combined with scanning transmission electron microscopy reveals that the excess Hf(Zr) atoms intercalate within the hollow sites. We found that the intercalated atoms expand the lattice and increase the in-plane and out-of-plane stresses, which stabilize both the rhombohedral phase (r-phase) and its ferroelectric properties. Our ferroelectric devices, which are based on the r-phase Hf(Zr) 1+x O 2 , exhibit an ultralow coercive field (~0.65 megavolts per centimeter). Moreover, we achieved a high endurance of more than 10 12 cycles at saturation polarization. This material discovery may help to realize low-cost and long-life memory chips.
A quantum nutcracker, a recently proposed catalytic system for hydrogen dissociation, consists of two inert components: an organic molecule such as a transition metal phthalocyanine and an inert surface such as Cu or Au. The reaction takes place at the interface between the two components, which are weakly bonded by Van der Waals (VdW) forces. Here, we explore a method used to tune the reaction barrier in a quantum nutcracker system for hydrogen dissociation. By employing density-functional-theory calculations, we find that the H2 entry barrier, which is the rate-limiting barrier, is reduced by replacing the phthalocyanine by porphyrin derivatives such as octaethylporphyrin (OEP) and tetraphenylporphyrin (TPP). The system remains active if a dissociated H atom is adsorbed on the transition metal ion. Metallic two-dimensional materials such as NbS2 and CoS2 are good candidates for the quantum nutcracker. The present design of a quantum nutcracker for hydrogen dissociation provides new opportunities with which to induce catalytic activity in VdW-bonded systems.
Polyvinylidene fluoride (PVDF), a widely used recalcitrant per- and polyfluoroalkyl substance (PFAS) polymer, poses environmental challenges in its defluorination because conventional thermal methods release toxic volatile fluorinated compounds (VFCs). Here, we report an electrochemical water-mediated strategy for efficient, VFC-free PVDF defluorination under ambient conditions. The method achieves a high fluorine-to-fluoride conversion (93%) and is validated with an industrially relevant capacity of 8.5 kg·m −3 ·day −1 on real wasted battery electrodes containing PVDF as the binder. The high efficiency originates from the spatial confinement of electrochemically generated hydroxide ions near the cathode surface. Mechanistically, isotopic labeling and kinetic Monte Carlo simulations reveal water’s unprecedented dual role as both a reactant and a catalyst, driving an ionic pathway that fundamentally suppresses VFCs. This offers a scalable, sustainable, and nontoxic alternative for the critical challenge of C─F breaking and PFAS defluorination.
Graphene nanoribbons (GNRs) have been regarded as promising materials for nanoelectronics and spintronics due to their unique electronic, magnetic, and topological properties. In particular, cove-edged GNRs (CGNRs) are found to exhibit semiconducting properties while the band gaps are tuned by the size of coves or the distance of the adjacent cove units. Here, we report that the external strain significantly modulates the electronic properties of B-N doped CGNRs in addition to the size of coves and the distance of the adjacent cove units. We find that B-N doped CGNRs display semiconducting behavior with variable bandgaps depending on the cove topology. The strain-induced changes in the atomic structures of CGNRs have significant implications for their mechanical and electronic properties. The structural deformation under strain, not only releases internal stress and maintains the stability of CGNRs (up to 40% strain), but also modulates the band gap obviously (band gap turns from 0.84 eV to 0 eV, meaning a semiconductor to metal transition). It is also found that the strain leads to the band inversion and band flattening in CGNRs, making them promising candidates for strain engineering. Our work investigates the mechanical response and electronic properties of GNRs under uniaxial stress, which paves the way for evaluating the feasibility and performance of GNR-based devices.
Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted considerable attentions in catalysis due to their exceptional high porosity and chemical tunability. By tuning metal centers and organic ligands, it is possible to precisely control the electronic structure of MOFs, offering a promising strategy to enhance catalytic performance. In this study, we performed theoretical investigations into four 2D MOFs: Cu-1,4-dicyanobenzene (Cu-DCB), Cu-1, 3-dicyanobenzene (Cu-DCB′), Cu-1,1′:4′,1′′-terphenyl]-4,4′′-dicarbonitrile (Cu-TPDCN), Cu-1,1′:3′,1′′-terphenyl]-4,4′′-dicarbonitrile (Cu-TPDCN′). Our calculations reveal that all the four MOFs exhibit metallic properties, but only Cu-DCB′ and Cu-TPDCN′ frameworks have negative adsorption energies for hydrogen ions. Upon replacing the Cu atoms with Ni, the Ni-based frameworks exhibit semiconducting behavior, and surprisingly, all show negative adsorption energies for hydrogen. This is attributed to the bond order tunability of C–N bonds during hydrogen adsorption in Ni-based nanostructures. Furthermore, the Gibbs free energy of hydrogen in the Ni-DCB framework is significantly reduced to −0.03 eV. These findings indicate that metal substitution is an effective strategy to enhance the electrocatalytic performance of hydrogen evolution reactions. This work introduces a novel approach for optimizing the catalytic activity of 2D MOFs and developing high-performance catalysts.