Ru is considered as an effective active species for N2O decomposition; however, there is disagreement about which ruthenium species is key for catalytic activity. In order to understand the role of Ru species in N2O decomposition, Ru/Al2O3 (Ru/Al2O3-H2, Ru/Al2O3-NaBH4, Ru/Al2O3-air) catalysts with different ratios of metallic Ru were prepared and evaluated for their catalytic activities. Various characterizations, especially in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), were applied to investigate the relationship between activity and different Ru species. The results indicate that the N2O conversion displayed a linear relationship with the amount of metallic Ru. The DRIFTS results of adsorption for N2O show that metallic Ru was the active site. The catalytic processes are put forward based on metallic Ru species. The deactivation with increasing times used is due to the decrease in the amount of metallic Ru and agglomerates of Ru particles on the surface of catalysts.
10 February 2022 in Reviews in Inorganic Chemistry
With the rapid development of urbanization and industrialization, environmental pollution has become more severe. Volatile organic compounds (VOCs) could be originated from the following sources: domestic, mobile and industrial sources. As important air pollutants, VOCs could cause serious harm to the environment and human health. Therefore, removing VOCs has become a priority research direction of ecological issues. Among the many elimination methods, catalytic oxidation approaches are among the most effective and economical methods which can transform VOCs into CO2 and H2O. MnOx catalysts are among the most active catalysts, which can be further modified by different cations such as Cu2+, Co2+, Cr3+, Ni2+ and Ce4+ to form mixed oxides to improve the catalytic oxidation of VOCs activity. Moreover, MnOx can be loaded on the carrier, improving the redox and oxygen storage capacity and improving its stability and activity. This review explores the structure, preparation and oxidation state of Mn-based catalysts.
Hydrothermal and co-precipitation methods were studied as two different methods for the synthesis of CeO2nanocatalysts. Co/CeO2 catalysts supported by 2, 4, 6, or 8wt% Co were further synthesized through impregnation and the performance of the catalytic oxidation of CO has been investigated. The highest specific surface area and the best catalytic performance was obtained by the catalyst 4wt% Co/CeO2 with the CeO2 support synthesized by the hydrothermal method (4% Co/CeO2-h), which yielded 100% CO conversion at 130 °C. The formation of CeO2 nanoparticles was confirmed by TEM analysis. XRD and SEM-EDX mapping analyses indicated that CoOx is highly dispersed on the 4% Co/CeO2-h catalyst surface. H2-TPR and O2-TPD results showed that 4% Co/CeO2-h possesses the best redox properties and the highest amount of chemically adsorbed oxygen on its surface among all tested catalysts. Raman and XPS spectra showed strong interactions between highly dispersed Co2+ active sites and exposed Ce3+ on the surface of the CeO2 support, resulting in the formation of the strong redox cycle Ce4+ + Co2+↔ Ce3+ + Co3+.This may explain that 4% Co/CeO2-h exhibited the best catalytic activity among all tested catalysts.
27 February 2023 in Reviews in Inorganic Chemistry
Volatile organic compounds (VOCs) are an important class of environmental pollutants, and there is much interest in China to eliminate such pollutants. Noble metal catalysts have long been a family of catalysts with high efficiency and good low-temperature catalytic activity. As a representative of the noble metals, Pt has been widely used. This paper reviews the research trend of Pt-based catalysts for the catalytic oxidation of VOCs, and it compares several important components of Pt-based catalysts. The size of Pt particles, supported carriers, and reaction mechanism are reviewed. Toluene in VOCs is the main research subject. The activity, stability, water resistance, and selectivity of a series of Pt-based catalysts are summarized.
10 March 2026 in Journal of the Electrochemical Society
Binders typically interact with surface -OH groups on silicon anodes via van der Waals forces, hydrogen bonds, or covalent bonds. However, poor mechanical flexibility leads to volume expansion of silicon anodes and degraded electrochemical performance. Therefore, this work employs an aqueous solution blending method to integrate sodium alginate, β-cyclodextrin, and Al³⁺ ions, constructing a dual-cross-linked network binder featuring metal coordination bonds and dynamic hydrogen bonds. The prepared Alg-β-Al composite binder exhibits high viscosity, moderate modulus, strong electrode detachment force, and excellent wrinkle resistance. Silicon anodes constructed with this binder demonstrate high initial coulombic efficiency (93.2%), outstanding rate performance, and long-term cycling stability. After 200 cycles at 0.2Ag⁻¹, the reversible capacity of Si@Alg-β-Al retained 1560.8 mAh/g, and even after 800 cycles at 0.5Ag⁻¹, it maintained a reversible capacity of 1650 mAh/g. Furthermore, it effectively buffers silicon volume expansion, maintains electrode structural integrity, promotes lithium ion transport, and induces the formation of a stable solid electrolyte inter-phase (SEI) film. This work provides new insights into the balance between rigidity and flexibility in high-performance binders and their electrochemical performance.