Nowadays, optical fiber sensors are extensively being explored for the detection of magnetic fields. Against this backdrop, a highly sensitive magnetic field sensor based on the combination of magnetostrictive material and Vernier effect is proposed and experimentally demonstrated. The proposed sensor consists of two Fabry-Perot interferometers (FPIs), each comprising two sections of hollow-core fiber as FP cavities and a single-mode fiber (SMF) as a separator. One of the FPIs, which is bonded to the magnetostrictive material, undergoes further modulation by a high-frequency CO 2 laser to enhance its sensitivity. Both simulated and experimental results demonstrate that the proposed sensor exhibits significant spectral response to the extension effect of the material under magnetic field variation. Within the range of 0–11.34 mT, the highest sensitivity achieved is 1.10 nm/mT, while demonstrating excellent temperature stability and repeatability. With its low-cost, simple structure, easy fabrication process and high sensitivity, this proposed sensor exhibits great potential for magnetic field measurement.
1 September 2021 in Journal of Lightwave Technology
In this paper, an all-single-mode fiber strain sensor based on a bent structure Mach-Zehnder interferometer (BS-MZI) is proposed. This sensor consists of two identical bent structures, one of which excites the cladding modes, and the other couples them back to the core. Interference occurs when the cladding and the core modes meet each other. Therefore, the bent structures function as an MZI. The bent structures are fabricated by releasing the pulse of the CO 2 laser along the specific designed paths. The fiber shaping method based on CO 2 laser polishing is flexible, which is demonstrated in detail. The unique geometrical shape of the bent structures brings high strain sensitivity to the sensor. As a consequence, the sensor with a length of 9.6 mm exhibits an ultrahigh strain sensitivity, which reaches 165 pm/μϵ. Experimental results show that the strain responses of the BS-MZIs are highly correlated with their interference lengths and the modulated lengths. Its temperature-strain cross-sensitivity is as low as 0.21 μϵ/°C. Moreover, the sensor exhibits high stability and repeatability in strain measurement, which makes it a promising sensor in strain measurement.
Optic fiber sensors for refractive index (RI) measurement have brought about widespread attention in an extensive range owing to their unique properties. In this paper, we theoretically analyzed and experimentally verified a brand-new type of long period fiber grating with two resonant peaks. This structure is obtained by side-polishing method and melting tapered method. Firstly, a single-mode fiber (SMF) is produced into staggered V-shaped grooves on symmetrical sides by high-frequency CO 2 laser. It is then heated and stretched by optic fiber melting tapered system for bending the core towards two-sides grooves. The sinusoidal core is closer to external environment and exhibits a stronger refractive index modulation, which prompts this structure more sensitive to RI. The structure possesses two resonant peaks of 1382.6 nm (dip-1) and 1473.4 nm (dip-2), which can be used to measure temperature and RI simultaneously. The experimental results present that the maximum RI sensitivity of the proposed sensor exhibits 620 nm/RIU (RI unit) in dip-2. Furthermore, compact sensing area, low cost and strong mechanical property of the proposed sensor make itself more suitable for high-accuracy RI measurement.
A compact Omega shaped long-period fiber grating (OS-LPFG) for vector bending measurement is proposed and investigated in this paper. This sensor is fabricated by periodically splicing single-mode fiber (SMF) and multi-mode fiber (MMF) into Omega shape to get the purpose of sensitivity enhancing. The proposed OS-LPFG can distinguish the bending direction and achieves the curvature sensitivities in X, Y, -X directions are 12.03 nm/m -1 , –69.95 nm/m -1 and –19.84 nm/m -1 at the range of 0 m -1 to 1.5 m -1 . Meanwhile, the sensor has a small temperature crosstalk of 0.0011 m -1 /°C at the temperature range of 20 °C to 110 °C. In addition, the sensor features a compact structure with the length of 1.5 mm due to the strong refractive index modulation induced by fabricating method, which proposes a feasible idea for compact fiber curvature sensor design.
We propose a gelatin-coated long period fiber grating humidity sensor which has temperature compensation for low-error humidity detection. The output spectrum shows three resonance dips. The dip caused by gelatin-coated grating has humidity sensitivity of 0.09 nm/%RH and temperature sensitivity of 0.15 nm/°C. Another two dips caused by PDMS-coated grating have almost no response to humidity, which can be used for temperature compensation under low temperature and high temperature range, respectively. We come up with a coefficient matrix and experimentally obtain the humidity and temperature sensitivity of both resonance dips, thus temperature and humidity can be demodulated.