Ceramifiable ethylene propylene diene monomer (EPDM) composites with fiber network structures were prepared by using aramid fiber (AF), ammonium polyphosphate (APP), and silicate glass frits (SGF). The effect of AF on the curing characteristic of the ceramifiable EPDM composites was studied. The morphology of AF in the composites system was observed by optical microscopy (OM) and scanning electron microscope (SEM). The effects of the observed AF network structures on the solvent resistance, mechanical properties, ablative resistance, self-supporting property, and ceramifiable properties of the composites were investigated. Results suggested that the existence of the AF network structure improved the vulcanization properties, solvent resistance, thermal stability, and ablative resistance of the EPDM composites. An excellent self-supporting property of the EPDM composites was obtained by combining the formation of the AF network and the formation of crystalline phases at higher temperature (above 600 °C). The thermal shrinkage performance of AF and the increased thermal stability of the EPDM composites improved the ceramifiable properties of the EPDM composites.
12 April 2023 in Journal of Thermal Analysis and Calorimetry
Ceramifiable EVA composites were prepared by addition of WCRP and silicate glass frits (SGFs) to EVA resin. Ceramic residues were obtained by firing ceramifying EVA composites at 600, 800 and 1000 °C for 30 min. The effect of WCRP on the self-supporting property of the composites and the effect of firing temperatures on the flexural strength of the ceramic residues for the composites are investigated. Results show that the addition of WCRP improves the self-supporting property of the composites, and the flexural strength of the ceramic residues containing phosphorus is enhanced with increasing temperature. XRD analysis shows that addition of WCRP promotes the precipitation of cristobalite (SiO2), which leads to an improvement in the properties. XRF and FT-IR demonstrate the WCRP in the composite could be converted into [PO4]3− at high temperature. It can be concluded that phase separation between the phosphates and SGFs causes the formation of the crystalline phase. SEM confirms that the number of pores in the residues decreases with increasing temperature, which results in the increase in flexural strength.
12 January 2016 in Science and Engineering of Composite Materials
Various ceramifiable ethylene-vinyl acetate copolymer (EVA) composites were prepared by melt blending with two kinds of glass frits, organically modified montmorillonite (OMMT) and whitened and capsulised red phosphorus (WCRP). The influence of different filler components and firing temperatures on the ceramifiable properties of the composites was studied. The dripping behaviour of the composites was analyzed by a vertical burning test. The microstructure of the residues was characterised by X-ray diffraction (XRD) and scanning electron microscopy. The results showed that the optimised EVA composite was free of melt dripping during burning with the addition of OMMT. A dimensionally stable and dense ceramic residue was also obtained, especially with the addition of WCRP. It was suggested that new phases were formed at firing temperatures, and WCRP could promote the formation of ceramic body which was not fused during firing at 900°C as evidenced by XRD.