The paper proposes the validation of the latest System Advisor Model (SAM) vs. the experimental data for concentrated solar power energy facilities. Both parabolic trough, and solar tower, are considered, with and without thermal energy storage. The 250 MW parabolic trough facilities of Genesis, Mojave, and Solana, and the 110 MW solar tower facility of Crescent Dunes, all in the United States South-West, are modeled. The computed monthly average capacity factors for the average weather year are compared with the experimental data measured since the start of the operation of the facilities. While much higher sampling frequencies are needed for proper validation, as monthly averaging dramatically filters out differences between experiments and simulations, computational results are relatively close to measured values for the parabolic trough, and very far from for solar tower systems. The thermal energy storage is also introducing additional inaccuracies. It is concluded that the code needs further development, especially for the solar field and receiver of the solar tower modules, and the thermal energy storage. Validation of models and sub-models vs. high-frequency data collected on existing facilities, for both energy production, power plant parameters, and weather conditions, is a necessary step before using the code for designing novel facilities.
Inks printing is an innovative and practicable technology capable of fabricating the next generation of flexible functional systems with various designs and desired architectures. As a result, inks printing is extremely attractive in the development of printed wearables, including wearable sensors, micro supercapacitor (MSC) electrodes, electromagnetic shielding, and thin-film batteries. The discovery of Ti3C2Tx in 2011, a 2D material known as a MXene, which is a compound composed of layered nitrides, carbides, or carbonitrides of transition metals, has attracted significant interest within the research community because of its exceptional physical and chemical properties. MXene has high metallic conductivity of transition metal carbides combined with hydrophilic behavior due to its surface terminated functional groups, all of which make it an excellent candidate for promising inks printing applications. This paper reviews recent progress in the development of 2D MXene inks, including synthesis procedures, inks formulation and performance, and printing methods. Further, the review briefly provides an overview of future guidelines for the study of this new generation of 2D materials.
This paper aims to compute the performances of a smaller version of Solana power plant, with half the solar field, and 1 of 2 turbines in the power cycle, that can be built in Amman or Ma’an in Jordan. The climate conditions for both Amman and Ma’an are discussed thoroughly in the paper. Furthermore, a preliminary validation exercise performed by using measured monthly average values of electricity production from existing plants, a system advisor model (SAM) is used to predict the performances of the proposed Solana-like plants in Ma’an and Amman. The validation shows a good agreement with the measured data for different existing power plants. The simulation results including the monthly capacity factors suggest the annual operation in Ma’an maybe even better than the operation in Gila Bend, for an annual average capacity factor of about 41% for Ma’an vs. a capacity factor of about 39% for Gila Bend. This is mainly due to the best combination of direct normal irradiance (DNI) and the dry bulb temperature across the year in Ma’an versus Gila Bend.
This paper proposes a smart system for controlling the temperature of a water heating system. The proposed system is powered by solar energy and it allows cooling and heating the water used in households throughout the year, particularly, when the outside temperature goes to extreme highs and lows. The system is equipped with sensors to measure the temperature of water inside the tank and show the range of water. A mobile application is developed to monitor and control the water temperature around the clock.